PDA

View Full Version : Magnex exhaust...


Pau1os
14th September 2011, 12:07
Basically my exhaust system is 4-2-1 (raceland), Decat. De silenced centre and a magnex back box.

Should this system be popping loads? Because it doest. It pops only at 1900revs when changing down gears and sounds wank. But not at high revs.

I have quite a few joins in the pipes where iv decat'd it etc. Could this be the problem?

Or is it simply the magnex back box?

Any help would be good.

My car is a mk2 vts by the way

Thanks

ldavies
14th September 2011, 17:25
Mine used to pop like a son of a bitch and most times I could have it popping constantly about 10 pops in a row lol.
Dosent pop now since I've had it cammed.

Sam
14th September 2011, 19:25
Ive got a similar setup on my VTR and it doesn't pop very often.

ldavies
14th September 2011, 19:33
my set up is:
Miltek 4-2-1 manifold
Magnex twin back box
OH ye and the Supersprint straight through mid section de catted.

Pau1os
15th September 2011, 20:00
was it popping at high revs?

Cam
16th September 2011, 02:19
Mine dont pop as much as i would like its got raceland 4-1 and powerflow twin straight through, but when it does bang it does it nice and load.

b0t13
16th September 2011, 14:27
i had a raceland 421, and silenced magnex, didnt pop at all just small pops low down, the magnex isnt good for poping, change the backbox and itll probaly do it then and be alot louder