raceland manifold

[dannybluevtr]

hi all
right this is my nightmare lol ok i have a mk2 VTR with a raceland 4banch manifold and this saturday just gone i have had a full piper system fitted by demontweeks but the sleeve on the manifold keeps slipping back and is blowing from there, i have had this put back several times, and now has 2 clamps and its still doing it.

does anyone have any ideas how i can stop this?

thanks danny

[KamRacing]

what are you using to seal it? Use high temp silicon sealer rather than exhaust paste. This will flex. Worst case get it welded

[dannybluevtr]

where can i get high temp paste from? ye welding it might be my next option,

thanks for the reply

danny

[KamRacing]

any local motorfactor. Look for gasket paste or similar

[SteveWC]

any local motorfactor. Look for gasket paste or similar

+1 sometimes called liquid gasket too, sealed the sleeve on my old bike exhaust with it. "should" be available at some decent DIYs too...

[dannybluevtr]

thanks guys