rad fan switch

[ginge-vts]

can any one help me i have a mk2 two vtr. and the rad fan dont come on so i know it the switch. but can any one tell me where it is. need to know a.s.a.p thanks for ur time:wall:

[adamskiTNR]

Looking at the engine ay from the front, it is top right of the rad. blue connector

[tom_lloyd_4]

fan is ecu controlled on mk2s

[adamskiTNR]

I have a mk2 , but some of it's parts are change over, so you can never tell

[tom_lloyd_4]

the ones on the engine iirc are blue temp gauge green ecu sensor if its not ecu controlled (single plug ecus arnt) the stat will be on the top right of the rad as you look down on it
hope that helps Tom

[ginge-vts]

thank every one for the replies. it a mk2 52 plate i have looked on the rad and cant find any thing. the wire from the fan just go in to all the other wires.
the only thing i could think of is that it the green loom in the thermestat. but know i have look at your replies. im guesing it it in the ecu. would i be right in thinking that. once again thanks for the replies:y: