supersprint back back on 1.1 center pipe rattling

[SAXO8VYO]

basicly ive got my supersprint back box on my furio and long story short ive got a 1.1 center pipe straight from the downpipe no cat (basicly decat). Since ive had it ive had trouble getting the back box to smoothly/completly line up with the center pipe when the clamp is on im using the standard clamp that was on the standard back box . I cant get it to go on but it just seems like it doesnt want to fit and when i get it too its fine for 2-5 days then it will just start blowing a little then more then more from the clamp connection from back box to center pipe

[GoldenSaxo]

Isit a new backbox mate and isi deffo for a saxo?

[KamRacing]

The 1.1 is probably a much smaller bore than the 1.4 and 1.6 8v models (46.6mm) so its going to be more tricky to get the olive clamp seated to hold both comfortably. Try using silicon sealer as its flexible. Then tighten using threadlock. Hopefully that will keep things nice.