anti roll bar urgent

[Saxo-KidNI]

How do i remove the anti roll bar plates and anti bar

[Mochachino]

Urgent*

Have you even attempted it yourself?

Undo the bolt then pull it off....

Put your palm on the plate then bend your fingers around the plate and then tense your hand. this will grip the plate, then move your body backwards and pull your hand towards your body. This will pull the plate off.

[Saxo-KidNI]

Urgent*

Have you even attempted it yourself?

Undo the bolt then pull it off....

Put your palm on the plate then bend your fingers around the plate and then tense your hand. this will grip the plate, then move your body backwards and pull your hand towards your body. This will pull the plate off.

i give up

Bolts are off pulled like fook and it wont budge an inch im just bending the plate

any easier way of lowering the arse of a saxo with out filling the boot with cement

pissing me off something shocking lol :wall:

[Mochachino]

Hit the plates with a hammer as if you are trying to spin them round. Only one end comes off. Oh and put an M10 or 12 bolt in it and then drill it in with one side bolted up still.

[Saxo-KidNI]

Hit the plates with a hammer as if you are trying to spin them round. Only one end comes off. Oh and put an M10 or 12 bolt in it and then drill it in with one side bolted up still.


the bolt taken out of the plate on the passenger side snapped off do you know if it was important??

[Mochachino]

lol yeh it was.

[Saxo-KidNI]

lol yeh it was.

cable tie will fix that pmsl :mental::detective:

[saxo-parts]

another good reason for the existance of garages....is the bolt important? yes, it holds the anti roll bar in, without it the arb can come out and jam into the wheel, if you lucky there will just be a hideous noise, unlucky and you'll die. thats the truth

[Saxo-KidNI]

another good reason for the existance of garages....is the bolt important? yes, it holds the anti roll bar in, without it the arb can come out and jam into the wheel, if you lucky there will just be a hideous noise, unlucky and you'll die. thats the truth

will get it into work on wed or thursday and drill it out and replace the broken bolt and the one on the other side