| Saxo Problems & Queries If you're having problems with your Saxo and you're after a bit of advice, check this forum out... |
 |
16th December 2011, 21:35
|
#1
|
|
Regular Poster
Join Date: May 2011
Location: Belfast
Posts: 403
Car(s): Saxo 1.1 Eastcoast
|
anti roll bar urgent
How do i remove the anti roll bar plates and anti bar
Last edited by Saxo-KidNI; 17th December 2011 at 21:06.
|
|
|
|
16th December 2011, 21:37
|
#2
|
|
Saxperience Hardcore!
Join Date: Nov 2007
Location: Guantanamo Bay
Posts: 28,700
Car(s): oyster card
|
Urgent*
Have you even attempted it yourself?
Undo the bolt then pull it off....
Put your palm on the plate then bend your fingers around the plate and then tense your hand. this will grip the plate, then move your body backwards and pull your hand towards your body. This will pull the plate off.
|
|
|
|
|
The Following User Says Thank You to Mochachino For This Useful Post:
|
|
|
17th December 2011, 21:10
|
#3
|
|
Regular Poster
Join Date: May 2011
Location: Belfast
Posts: 403
Car(s): Saxo 1.1 Eastcoast
|
Quote:
Originally Posted by Mochachino
Urgent*
Have you even attempted it yourself?
Undo the bolt then pull it off....
Put your palm on the plate then bend your fingers around the plate and then tense your hand. this will grip the plate, then move your body backwards and pull your hand towards your body. This will pull the plate off.
|
i give up
Bolts are off pulled like fook and it wont budge an inch im just bending the plate
any easier way of lowering the arse of a saxo with out filling the boot with cement
pissing me off something shocking lol 
|
|
|
|
|
17th December 2011, 21:31
|
#4
|
|
Saxperience Hardcore!
Join Date: Nov 2007
Location: Guantanamo Bay
Posts: 28,700
Car(s): oyster card
|
Hit the plates with a hammer as if you are trying to spin them round. Only one end comes off. Oh and put an M10 or 12 bolt in it and then drill it in with one side bolted up still.
|
|
|
|
|
17th December 2011, 21:58
|
#5
|
|
Regular Poster
Join Date: May 2011
Location: Belfast
Posts: 403
Car(s): Saxo 1.1 Eastcoast
|
Quote:
Originally Posted by Mochachino
Hit the plates with a hammer as if you are trying to spin them round. Only one end comes off. Oh and put an M10 or 12 bolt in it and then drill it in with one side bolted up still.
|
the bolt taken out of the plate on the passenger side snapped off do you know if it was important??
|
|
|
|
|
17th December 2011, 21:59
|
#6
|
|
Saxperience Hardcore!
Join Date: Nov 2007
Location: Guantanamo Bay
Posts: 28,700
Car(s): oyster card
|
lol yeh it was.
|
|
|
|
|
17th December 2011, 22:03
|
#7
|
|
Regular Poster
Join Date: May 2011
Location: Belfast
Posts: 403
Car(s): Saxo 1.1 Eastcoast
|
Quote:
Originally Posted by Mochachino
lol yeh it was.
|
cable tie will fix that pmsl  
|
|
|
|
|
18th December 2011, 14:22
|
#8
|
|
Saxperience Post Whore
Join Date: Aug 2009
Location: ilkeston derbyshire
Posts: 9,823
Car(s): C2 VTR stripped, 406hdi, clio 172
|
another good reason for the existance of garages....is the bolt important? yes, it holds the anti roll bar in, without it the arb can come out and jam into the wheel, if you lucky there will just be a hideous noise, unlucky and you'll die. thats the truth
|
|
|
|
|
19th December 2011, 21:22
|
#9
|
|
Regular Poster
Join Date: May 2011
Location: Belfast
Posts: 403
Car(s): Saxo 1.1 Eastcoast
|
Quote:
Originally Posted by mandyslover70
another good reason for the existance of garages....is the bolt important? yes, it holds the anti roll bar in, without it the arb can come out and jam into the wheel, if you lucky there will just be a hideous noise, unlucky and you'll die. thats the truth
|
will get it into work on wed or thursday and drill it out and replace the broken bolt and the one on the other side
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 19:21.
|
Linear Mode
