PDA

View Full Version : Wheels and Spacers Problems

Baz
1st February 2012, 09:07
As some will know I bought some superleggeras the other day....

Thought i'd try to fit them this morning, however the spacers I currently have on my TD Monza's won't fit into the OZ wheel as the lip is too big therefore won't sit flush against the wheel.

But with the spacers I got with the wheels won't fit over the hub on the rear drum. They will however fit on the front hubs. Any suggestions? I don't really want to use the spacers I got with the wheels as the bolts I have aren't really long enough. OZ spacers are 25mm and the TD ones are 20mm.

Would I be ok to just sand down the lip on my TD spacers so they fit into the wheel or is that just silly?

OZ Spacers are the silver ones, TD spacers are red.

http://i40.photobucket.com/albums/e242/baznett/IMAG0173.jpg

http://i40.photobucket.com/albums/e242/baznett/IMAG0174.jpg

http://i40.photobucket.com/albums/e242/baznett/IMAG0175.jpg


Cheers guys and gals :) Hope I explained the above properly....
Baz
1st February 2012, 13:14
:bump:
Baz
1st February 2012, 18:26
No-one?
Ben_SaxoForte
1st February 2012, 23:54
I wouldn't sand the lip you will probably end up with the wheel shaking about because it wont be dead centred anymore
Baz
2nd February 2012, 09:45
I guess sanding them down is out then...any other suggestions people? :)
Baz
3rd February 2012, 14:20
:bump: would buying hubcentric spacers work? But if I do will I come across the same problem as above?
Ben_SaxoForte
3rd February 2012, 20:55
I don't really understand why the oz spacers will fit over the front hubs but not the rears? im sure saxo hubs are the same size all round?
Baz
3rd February 2012, 20:57
I don't really understand why the oz spacers will fit over the front hubs but not the rears? im sure saxo hubs are the same size all round?

exactly why i'm confused too!? I don't understand why they wouldn't be the same...
Baz
3rd February 2012, 20:59
Just had a thought....I have 206 GTi brakes on the front.....makes me think that I'll need a VT rear beam to make them fit!
matteon
3rd February 2012, 21:00
have you measured to see if they are the same front and back ? ive just fitted 20mm spacers on mine and they were all the same size fit on the hub :S
Baz
3rd February 2012, 21:01
nope but as above, remembered that I have 206 GTi brakes on the front, guess they are different size than standard size hub? Guess i'm gonna have to take both wheels off tomorrow and have another look lol. Bet ive done something stupid haha