View Full Version : play in gear stick
xWYARD
18th March 2012, 23:26
my saxo has alot off play when i move the gear knob any 1 know what it could be?
adamspencer
18th March 2012, 23:35
mine does too, think its just how saxos are, older fiats are the same too. If it still slots into gear fine i wouldnt worry. If you do still worry, try replacing the pin in the gear linkage, theres loads of feeds on it
xWYARD
18th March 2012, 23:36
ah right so its okay then yeah goes into gear okay
adamspencer
18th March 2012, 23:37
yeah mines the same, took it in the garage and they checked it and said theres nothing wrong with it, only starts becoming a problem when the linkage wears more and its hard to get gears
Bedford126
18th March 2012, 23:38
It's wear in the gear box roll pin 80p or wear in the linkages about £15 each and there are 3 or wear in the selector ball£30 replace them in that order mate and that will sort it
xWYARD
18th March 2012, 23:41
okay cheers bud ill leave it for now but if it gets worse ill sort it
Bedford126
18th March 2012, 23:42
okay cheers bud ill leave it for now but if it gets worse ill sort it
Get the roll pin mate for 80p and will make it tonnes better.
xWYARD
18th March 2012, 23:43
link me 2 it mate please
xWYARD
18th March 2012, 23:58
where from?
Carlvtr88
19th March 2012, 01:28
isn't it a bitch of a job though ? ( roll pin ). I'd like it done as I know my Saxo needs it, but don't wanna pay loads for labour to fit a 50p part. Mine has enough play to make it difficult to get into third sometimes.
danny-vts
19th March 2012, 03:07
where from?
go to your main citroen or peugeot dealer and ask for a gearbox roll pin, i bought one last week. citroen could only sell them in a bulk of 10 so went to pug and bought 1, only cost 41p :) so bought 2 (a spare one)
isn't it a bitch of a job though ? ( roll pin ). I'd like it done as I know my Saxo needs it, but don't wanna pay loads for labour to fit a 50p part. Mine has enough play to make it difficult to get into third sometimes.
http://www.saxperience.com/forum/showthread.php?t=397542&highlight=roll+pin+change
go to post number 4, it shows you what to do :)
will be doing mine this week and will let you know how easy/hard it actually is lol
Carlvtr88
19th March 2012, 10:22
go to your main citroen or peugeot dealer and ask for a gearbox roll pin, i bought one last week. citroen could only sell them in a bulk of 10 so went to pug and bought 1, only cost 41p :) so bought 2 (a spare one)
http://www.saxperience.com/forum/showthread.php?t=397542&highlight=roll+pin+change
go to post number 4, it shows you what to do :)
will be doing mine this week and will let you know how easy/hard it actually is lol
I dont have the corrent permissions to view that page :homme: thanks anywat mate.
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.