removing power steering !

[devvo]

wanting to remove power steering , is this easy to do ? anybody come into any problems removing it?

[Spuddy09]

ye, just unblot it i reckon, i need a new one for my vts

[jeffchiz]

Take the pump and pipes off, plug to holes with bolts easy

[thecorporatemachine]

does the steering rack not need to be changed to a non-PAS one as well? this is the only reason i havent done mine as the pumps shagged.

[Saaamon]

Take the pump off, join the hoses, job done. Will take about 10 mins if you drag it out.

[greyjasper51]

Take the pump and pipes off, plug to holes with bolts easy

Drain the fluid outta the rack first...

Sent from my GT-I9100 using Tapatalk 2

[samsdad]

was going to ask this exact same question best get the bolts out lol

[blackie_2k5]

Removing pas from a car with pas makes the steering really hard unless you totally remove it and replace the rack etc, if you plug the holes its rock to steer lol

[jasonmayall]

Removing pas from a car with pas makes the steering really hard unless you totally remove it and replace the rack etc, if you plug the holes its rock to steer lol

+1
Really wouldnt reccomend using the same rack if you dont want PAS (it will be so hard to turn, almost impossible if you're not moving) They're not that hard to swap over but ive never fitted a manual, Can only assume it will be a straight swap, the rack might be longer though iirc.

[AndySAXO]

Not a straight swap, it the ram which causes the resistances, not the rack, remove the ram and will be like non pas, non pas racks change a lot and longer lock to lock, so pas rack quicker.

[AndySAXO]

Read this,

http://www.saxperience.com/forum/showpost.php?p=5847546&postcount=23

[thecorporatemachine]

Very helpful, quick bit of weight saving to be done then!!

[jeffchiz]

does the steering rack not need to be changed to a non-PAS one as well? this is the only reason i havent done mine as the pumps shagged.

dont have to change it, you can do if you want except the steering colum needs to be changed to non pas item as well, peope leave the pas racks in as it has a faster lock to lock its known as a 'quick non-pas rack'

Drain the fluid outta the rack first...

Sent from my GT-I9100 using Tapatalk 2

when removing the pipes the fluid generally decideds to drain out of its own accord...

Removing pas from a car with pas makes the steering really hard unless you totally remove it and replace the rack etc, if you plug the holes its rock to steer lol


+1
Really wouldnt reccomend using the same rack if you dont want PAS (it will be so hard to turn, almost impossible if you're not moving) They're not that hard to swap over but ive never fitted a manual, Can only assume it will be a straight swap, the rack might be longer though iirc.

if not done properly then yes its very hard, there is a difference to having a broken pas system (which makes steering very hard) over remvoing the pipes/pump

i was driving around for over a year with a pas rack with the pipes still attached but the fluid drained out and no pump, and it was fine no where near as bad as you make out, or im hench either way you decide :afro:

[jasonmayall]

i was driving around for over a year with a pas rack with the pipes still attached but the fluid drained out and no pump, and it was fine no where near as bad as you make out, or im hench either way you decide :afro:

Hench...
My PAS pipe burst a few months ago and it was much, much worse than a non PAS car. you must be huge :)

[blackie_2k5]

My diesel had the pump removed but everything else on it still when I bought... Just hanging lol


Was a cunt to park but same as a non pas car it's ok when your driving

[jeffchiz]

Hench...
My PAS pipe burst a few months ago and it was much, much worse than a non PAS car. you must be huge :)

well ive had my pas stopped working working before and yes it was horribile to steer almost popped my shoulder out its socket everytime i parked, but when i cracked my pas pump and i removed it and drained the fluid it wasnt hardly any harder to steer than a non pas car parking or driving

[AndySAXO]

Remove the ram it easy and will take all that stiffness away.

The reason it was hard when the pump stop because you are fight the fluid in the ram there no pump to pump it so you lose power assisted steering. But if you remove pump and the pipes and the ram, all that will be gone and leaves just a normal rack.

[AndySAXO]

Read the link I posted it explains a lot.

[MiniGibbo]

The theory whether you keep the pas rack aside, why do you feel the need to remove power steering anyway..?

What drives you to make your car shitter..

[jeffchiz]

The theory whether you keep the pas rack aside, why do you feel the need to remove power steering anyway..?

What drives you to make your car shitter..

some people just prefer the feel on non-pas, i think on saxo its jsut about perfect as its not too light but on my mums clio the steering is really over assisted, it just makes the car a bit gayer and easier to drive to please the masses (definition of a car without a mullet :afro:)

[AndySAXO]

Get a lot better feel without the pas.

Mine a track car, it a not needed part.

[Butcherm81]

I've removed the pump and pipes does any know the size of the bolts needed to plug the rack? I've binned the originals before measuring them.

[MartinObviously]

Don't plug the rack. Just leave them open.

The ram is separate to the rack, so it won't damage the rack.

I drove mine like that for about 6 years no worries.

[Crocko2]

Gonna be doing this soon myself on track car. Anyone know how much weight you ditch by removing pas? The pump looks weighty!!

[MartinObviously]

Gonna be doing this soon myself on track car. Anyone know how much weight you ditch by removing pas? The pump looks weighty!!

There's not too much weight in it, I'd guess the pump plus the pipes to the rack is just under 5Kg :)

If I get the chance, I'll weigh mine next time I'm across at my unit.

[sexy_gt]

8 or so kilos saved.

+ benefits of removing losses from charging system.

[Crocko2]

8kg's is well worth it though in my view!

[Crocko2]

Real simpleton question now...
What is "the ram". Clean answers only;)

[sexy_gt]

the part that looks like a damper on the rack in the engine bay by the bulkhead.

[Crocko2]

the part that looks like a damper on the rack in the engine bay by the bulkhead.

And this can just be removed without any problems? Does it have a gaiter on it? I think I saw this the other day as the gaiter was split.
Simple removal??

[Crocko2]

Does anyone have a link to a Guide to removing all PAS ? I've found a few but they arent very detailed...

[MartinObviously]

And this can just be removed without any problems? Does it have a gaiter on it? I think I saw this the other day as the gaiter was split.
Simple removal??

The bit with the gaitor on it is the rack itself

the ram is below that and it's about half the length. It should just unbolt - maybe easier said than done with the engine in place.

[Crocko2]

The bit with the gaitor on it is the rack itself

the ram is below that and it's about half the length. It should just unbolt - maybe easier said than done with the engine in place.

I'm hoping it unbolts from the left hand side, otherwise space looks very limited!
Will probably have a shot at doing it tomorrow night. Everything else in the pas removal looks pretty straight forward...

[Crocko2]

Can someone please show a pic of "the ram", don't wanna remove the wrong part and nause up the steering...

[MartinObviously]

Here it is, held in by 2 bolts.

http://i68.tinypic.com/fz909c.jpg

[Crocko2]

Here it is, held in by 2 bolts.

http://i68.tinypic.com/fz909c.jpg

Mate your a legend, thanks so much for posting that pic. Let's see if I can do it tomorrow with the engine in situ!!??

[Crocko2]

Tried and failed, just cannot get to the bolts with the engine in place. Tried turning the wheels in both directions which enabled slightly more clearance, but just not enough to get the hex bit in...
Any suggestions welcome.

[MartinObviously]

Tried and failed, just cannot get to the bolts with the engine in place. Tried turning the wheels in both directions which enabled slightly more clearance, but just not enough to get the hex bit in...
Any suggestions welcome.

Did you try it with the inlet manifold removed? :)

[Crocko2]

Did you try it with the inlet manifold removed? :)

Ah... will approach it differently tomorrow night then, with inlet manifold off.
Decided to do gear linkages instead for now.

[sexy_gt]

completely removed a rack with the engine and inlet (16v) on once. if it wasn't for a mate helping it would not of happened lol

[Crocko2]

completely removed a rack with the engine and inlet (16v) on once. if it wasn't for a mate helping it would not of happened lol

Well I bought a new set of extended hex keys thinking that would help, but still no joy!

I'm worried that taking more stuff - inlet manifold etc is above my skill set... and likely to result in some further wreaking of stuff.

Gotta get the power steering out though. I can't be defeated by this!!!

[Crocko2]

Well I have just returned to attempt this again after 3 months of modding work. And surprise surprise I still cannot get the ram out!!! Have tried drilling the bolt but just isn't enough room to gain access. I cannot believe how fiddly this simple task is!! There must be an obvious thing I am missing!?
I understand there are just 2 bolts holding the ram in. As I am ditching the pas I'm not too worried about butchering the thread or anything, but as access is so limited, I can't even smash it with an oversized torx bit...
I assume the metal piping is all connected to the ram and nothing needs to be 're-bolted' after I get the 2 bolts out?

[MartinObviously]

Yes the bolt that holds the ram nearest the drivers side will need to be re-used or a new bolt put in its place.

It's a fine pitch thread bolt too, I want to say it's M10x1.25 and about 50mm long.


Not sure about the other end, it's been so long I can't even remember now.