toyo 8v manifold

[tobomoto]

ive just fitted a toyo manifold to my mk 2 vtr as the weld between the cat and downpipe broke. so its now decated (mot is in janurary so not a prob yet). fitting it was easy enough but it seems a bit short between the 2nd pipe and the undercar pipe (if you have one you will know what i mean). anyone else have this when fitting it?
im going to get some full thread bolts tommorow as it seems they are fully tightened but still able to turn a bit as if they are lose. hopefully that will be the cause but just thought id ask if anyone else had this? cheers peeps.

[Sophia_Bush]

is this the 4-1 or the 4-2-1 as toyosport made 2 version if if the 4-1 with the separate pipe after it goes back into 1 then you should be able to adjust it a bit if it's the 4-2-1 pass lol

[tobomoto]

i dont actually know.... :panic:
just go and check!

[tobomoto]

its the 4-2-1 one. btw theres loads of clearance from the oil filter housing if anyone was wondering.

[tobomoto]

all sorted now- i used full thread bolts and just wound the nuts right up.

[marcusd]

Still a bit lost on the question but I had no issue fitting at all, except getting the old studs out