View Full Version : Supercharger
thorny4574
15th August 2012, 14:09
Am I wong in fitting one and a remap and everything would run. I know you would not get as much bhp but you would still get the benifits? I don't get the ass out of the car any way. Thoughts?
RyanSaxo
15th August 2012, 14:14
not sure I quite understand what the hell you are asking?
If you don't get your arse out in your car, as you say, your bolt on supercharger will work perfectly imo.
Wee_monkey1987
15th August 2012, 14:33
would of thought you'd need uprated injectors and most definately a 2bar map sensor
Gandi699
15th August 2012, 14:42
Depends what you want to do and how much boost you want it making. I highly doubt a standard ecu be flexible enough
jones91
15th August 2012, 18:38
You would have to use a standalone ecu and bigger injectors too, and then have it mapped to suit
Harv
15th August 2012, 19:59
And it will cost you around £4k+ even for a cheaper setup
thorny4574
16th August 2012, 13:31
Sorry I ment to say kick the ass out of the car. Spell chek kicked in! And you don't have to pay that much I'm only after a small boost so it will not put to much stress on the engine. Think of it as a really good induction kit ???
thorny4574
16th August 2012, 13:36
With the remap do it runs smooth. Apparently it's has been done on other cars but don't hold that to me. I can't see it Bering a problem as its just putinh more are in the block and I have a decat. With a re map it would just make sure everything is all good???????
Ross
16th August 2012, 13:56
Sorry I ment to say kick the ass out of the car. Spell chek kicked in! And you don't have to pay that much I'm only after a small boost so it will not put to much stress on the engine. Think of it as a really good induction kit ???
Not sure is srs?
thorny4574
16th August 2012, 18:47
Srs???
Prickle
16th August 2012, 18:56
Serious*
GolfJay
16th August 2012, 19:09
Maybe i'm being thick but what about compression?
Do you really expect to just bolt a supercharger to it, remap it and it just work ok?
thorny4574
16th August 2012, 21:20
This is what I want to know. Would I need to change the head gasket ??
Ross
16th August 2012, 22:24
Search please.
Covered many many times. There's even a sticky.
You will need to change a LOT of things. From this post it's clear you need to research a LOT more. Please - go away, do some research, then wen you've got a bit more knowledge, come back and ask your questions.
People aren't replying because they are so used to seeing people asking the same questions again and again with no thought into what they are thinking.
Most are simply dreamers. If your not one of those, a few days doing research will do you the world of good. :)
Don't take this post the wrong way. There is a WEALTH of information on these forums just waiting to be tapped into. :)
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.