What fuel rail to use with a c2 alloy inlet?

[white_vtr]

Just wondering what fuel rail to use with the inlet?
And do i need to drill and tap any more holes for studs. Cheers

[Ross]

Is there a reason you can't use the c2 rail?

[white_vtr]

Is there a reason you can't use the c2 rail?

Iv already got injectors to suit the standard saxo rail and c2 doesnt have a fuel regulator

[Ross]

Iv already got injectors to suit the standard saxo rail and c2 doesnt have a fuel regulator

Didn't know the injectors were different. That surprises me!

[e8_pqck]

Iv already got injectors to suit the standard saxo rail and c2 doesnt have a fuel regulator

Much easier to connect a the rail to an external adjustable FPR. The return then fits from the FPR back to the tank, it's nothing very difficult so no need to worry.

[white_vtr]

Didn't know the injectors were different. That surprises me!

Yeah a thought they were the same aswell, but they use longer ones. Just seeing if theres a way to modify the standard rail to the alloy inlet.

[white_vtr]

Much easier to connect a the rail to an external adjustable FPR. The return then fits from the FPR back to the tank, it's nothing very difficult so no need to worry.

Prolem iv got is the injectors though mate. Bought new pico ones so idealy want to use them.

[blackie_2k5]

You just need to make new mounts for the rail mate, that's why I picked up the rail :)

Much easier to use c2 one from all I've read

[consvts]

.......

[white_vtr]

Il have a bash at it tomorrow if i can get my finger out my arse lol

[gazza808]

C2 injectors and 106 are the same length... I have them both here,
I've got a jenvey rail/fpr setup on mine,

[white_vtr]

Hmm il have a better look later on and were can i get a jenvey rail/reg set up from?

[gazza808]

Jenvey, buy the alloy mounts cut em down and tap a new hole in them.

[e8_pqck]

Look on my progresses thread top mount vts rail

[axsaxoman]

c2 injectors and 106 are the same length... I have them both here,
i've got a jenvey rail/fpr setup on mine,
no they are not same length
changing from std c2 vts injectors to saxo pico type the c2vts fuel rail will then fit under the mounting lugs rather than on top
drill out threaded bit plastic rail and use 6mm nuts and bolts ot secure
use a 3 pipe type remote fuel reg onto std saxo lines as c2 fuel rail is single ended

[white_vtr]

no they are not same length
changing from std c2 vts injectors to saxo pico type the c2vts fuel rail will then fit under the mounting lugs rather than on top
drill out threaded bit plastic rail and use 6mm nuts and bolts ot secure
use a 3 pipe type remote fuel reg onto std saxo lines as c2 fuel rail is single ended



Spot on cheers mate :)