16v converssion

[largy]

Hi would a 2002 106 gti loom fit my plug behind the passanger light on my 2001 y Reg Furio ?

Thanks ben

[Tom5190]

No it wont fit.

[largy]

No it wont fit.

okay thanks, take it i would have to get a different loom ?

[Tom5190]

Your Y reg will have a crossover loom on it, is it single or three plug ECU? Theres two types of crossover looms.

You can either get the loom spliced or use a vts loom/ECU from the same age as yours and possibly swap a few sensors round.

[largy]

Your Y reg will have a crossover loom on it, is it single or three plug ECU? Theres two types of crossover looms.

You can either get the loom spliced or use a vts loom/ECU from the same age as yours and possibly swap a few sensors round.

well my furio is 3 plug

[largy]

will this plug fit mine ? casue if so then ive found a loom

http://imageshack.us/a/img442/2452/loommultiplug.jpg (http://imageshack.us/photo/my-images/442/loommultiplug.jpg/)

[Tom5190]

If yours in a Y reg three plug then there is a chance that will fit however not 100%. Can you take a photo of yours? Thats a single plug VTS loom by the look of it, some of the crossover looms have that connection on and some have a varient of the 3 plug one (its not the same as the later 3-plug models though so it wouldn't work)

Only way to tell is to grab a photo of the one thats on your car.

[largy]

If yours in a Y reg three plug then there is a chance that will fit however not 100%. Can you take a photo of yours? Thats a single plug VTS loom by the look of it, some of the crossover looms have that connection on and some have a varient of the 3 plug one (its not the same as the later 3-plug models though so it wouldn't work)

Only way to tell is to grab a photo of the one thats on your car.


okay thanks, well here's a photo of mine

http://imageshack.us/a/img41/6510/img0208ve.jpg (http://imageshack.us/photo/my-images/41/img0208ve.jpg/)

[Tom5190]

Yea that wont fit you will need a loom of the exact same year or a splice. The plug you have there is a generic 3-plug chassis plug, however there is two types, yours is the annoying one with the 3 rows of pins. A 3-plug VTS loom would plug into it and technically fit but it wouldn't work as the pins are in the wrong places.

[largy]

Yea that wont fit you will need a loom of the exact same year or a splice. The plug you have there is a generic 3-plug chassis plug, however there is two types, yours is the annoying one with the 3 rows of pins. A 3-plug VTS loom would plug into it and technically fit but it wouldn't work as the pins are in the wrong places.

okay thanks for your help ill just keep searching till i find one

[Tom5190]

They tend to be the hardest ones to find tbh matey, id save time and get it spliced.

[largy]

They tend to be the hardest ones to find tbh matey, id save time and get it spliced.

is it a hard job do ?

[Tom5190]

Erm well its impossible to do yourself without a wiring diagram, but there are people who do it...

[largy]

Erm well its impossible to do yourself without a wiring diagram, but there are people who do it...

okay well do you know any company that would do it and if so roughly how much for ?

[shaneio]

Why not just get a 3 plug vts loom as that's a straight fit. The 2001 was never a cross over

[largy]

Why not just get a 3 plug vts loom as that's a straight fit. The 2001 was never a cross over

i didnt know, thanks ill look for one of them then

[shaneio]

i didnt know, thanks ill look for one of them then

Their not that easy to get hold of, needs to be 2001 onwards, if your using the pre 2001 engine the you need to get 3plug sensors, not all of them as some are the same

[largy]

what sensors would need to be changed then

[Tom5190]

Anything with the newer plug than his wont fit, it screws in but the pins are different. it will have to be a 2001 vts loom or a splice.

[wheeler]

splicing = have a look on yell.com or yellow pages for 'auto electricians' in your local area. They'll probably quote an hourly rate and estimate how many hours they reckon it'll take them. Not an insane job but if you know what you're doing and have a diagram it'll probably be a lot easier = plus if it fecks up then it's on them to sort it.

[shaneio]

Anything with the newer plug than his wont fit, it screws in but the pins are different. it will have to be a 2001 vts loom or a splice.

There is nothing with a newer plug than his, he has the big multiplug and 3 plug ecu. Don't u mean anything older.

Iirc the change over year loom has a big multiplug but single ecu - this will still fit

[Tom5190]

There is nothing with a newer plug than his, he has the big multiplug and 3 plug ecu. Don't u mean anything older.

Iirc the change over year loom has a big multiplug but single ecu - this will still fit

No, there are 2 varients of the newer plug, he has the older one. They all 'fit' but the pins dont line up, therefore dont work.