mk2 1.1 with single plug ecu??

[rd123]

i have a 2000 mk2 1.1. looking at the ecu it looks llike i have a single plug. i thought that was mk1 only could someone please shed some light thanks

[Cam]

Its because its a crossover.

[Ross]

crossover loom/ecu. Not uncommon :)

[rd123]

thanks for the quick replies. am i going to have any bother with putsing a 16v in there. i take it i would get a single plug engine

[blackie_2k5]

You'll need a crossover loom unplug your ecu and take a pic of the loom plug

Facing pin side

[Sophia_Bush]

No such thing as a 1.1 mpi on a single plug ecu but plenty of spi came mk2

[welshpug]

TU1JP in Saxo is only single plug by the looks of it On SB.

[rd123]

here is the plugs http://i1270.photobucket.com/albums/jj618/Robert_Dickson/IMAG0265.jpg http://i1270.photobucket.com/albums/jj618/Robert_Dickson/IMAG0264.jpg

[blackie_2k5]

Need to see the pins in the plug

And you have some serious rust issues

[Tom5190]

Should*** be fine with a Mk1 or crossover loom but throw up a picture of pins anyway

[blackie_2k5]

I only ask as I'm sure the 1.1 is the same as vts and westy single plug looms

In which case you might be able to run the mk1 vts engine and ecu on that loom you have

Might*

[Tom5190]

I only ask as I'm sure the 1.1 is the same as vts and westy single plug looms

In which case you might be able to run the mk1 vts engine and ecu on that loom you have

Might*

This is right as far as ive always seen, plus ive never seen that shape plug with a different pin layout so should be good :y:

[rd123]

i know its bad for rust nothing a tin of hamerite cant sort tho. so your saying i MIGHT be able to run a mk1 vts off my loom are you meaning i would get a single plug loom and ecu or use my existing loom and get a vts ecu

[Tom5190]

I mean you should be able to use a mk1 vts loom and ecu no problem but if you want to be 100% take picture of the pins

[rd123]

ok thanks for all the help what pins would i take a pic of the round one or the ecu

[Tom5190]

the round one matey

[rd123]

kl no probs might sound a bit thick but how does it unplug

[Tom5190]

the joint rotates like undoing a tap then the plug pulls out

[welshpug]

that looks SPI to me.

[rd123]

ok thanks al get a pic up soon

[rd123]

cant get plug off its a bit stuck so al just chance it with a phase 1 loom. would a engine from an early 106 be fine and use a vts loom on it

[AlexB]

106 motor and vts loom would work
the 106 loom wont it has 2 plugs to the interior not the one like a saxo loom