Log in

View Full Version : No Power going to amp!!!


whazza22
17th August 2006, 06:33
I have recently bought a 800w amp and sub.

However, I wired the amp to the remote, battery and ground but there is no power light coming on and it does not work.

I have checked all the fuses and they are fine, and the connections couldnt get better.

Have I got a dodgy amp or does anyone have any ideas???

MrBirdPoo
17th August 2006, 07:49
Where is your ground connected?

whazza22
17th August 2006, 09:53
The ground is connect to the metal underneath the mat in the boot. I have sanded down the paint so it is pure metal.

Scott
17th August 2006, 10:45
circuit or bulb tester to make sure power is getting to the amp from both the live and remote alos check the fuses on the amp to

saxoash
17th August 2006, 11:00
How are you getting your power?,

Make sure u got the right wire for remote because the amp wotn turn on if you are not getting a signal from the remote

whazza22
17th August 2006, 11:29
I have connected the blue wire to the remote and red wire direct to the battery. The brown wire is connected to the car. I have checked all fuses but I will test the power from the remote and battery.

Thanks for all your help