No Power going to amp!!! - Saxperience

whazza22 · 17th August 2006, 07:33

I have recently bought a 800w amp and sub.

However, I wired the amp to the remote, battery and ground but there is no power light coming on and it does not work.

I have checked all the fuses and they are fine, and the connections couldnt get better.

Have I got a dodgy amp or does anyone have any ideas???

MrBirdPoo · 17th August 2006, 08:49

Where is your ground connected?

whazza22 · 17th August 2006, 10:53

The ground is connect to the metal underneath the mat in the boot. I have sanded down the paint so it is pure metal.

Scott^p · 17th August 2006, 11:45

circuit or bulb tester to make sure power is getting to the amp from both the live and remote alos check the fuses on the amp to

saxoash · 17th August 2006, 12:00

How are you getting your power?,

Make sure u got the right wire for remote because the amp wotn turn on if you are not getting a signal from the remote

whazza22 · 17th August 2006, 12:29

I have connected the blue wire to the remote and red wire direct to the battery. The brown wire is connected to the car. I have checked all fuses but I will test the power from the remote and battery.

Thanks for all your help