View Full Version : Fault Codes
tomshaw89
8th December 2012, 13:12
Hi guys I have just run a diagnostics on my car and have the following fault codes:
P1327 - S2000P - Ignition - Integrated Phase detection
P0412 - Secondary Air Injection System Switching Valve A Circuit Malfunction
But what do they mean? i don't understand :wall::wall:
All help appreciated thank you.
Tom
wadoryu
9th December 2012, 21:50
P1327 - S2000P - Ignition - Integrated Phase detection
Coil pack or knock sensor
P0412 - Secondary Air Injection System Switching Valve A Circuit Malfunction
Lambda sensor
tomshaw89
10th December 2012, 07:45
appreciate that Thank you
NeoN
31st December 2012, 16:25
P0412 could be the air injection system solenoid - have a look under the front - opposite side of where the washer bottle is and if there's any wires going there check they're connected/not broken, etc.
tomshaw89
2nd January 2013, 08:40
P0412 could be the air injection system solenoid - have a look under the front - opposite side of where the washer bottle is and if there's any wires going there check they're connected/not broken, etc.
I do have some cut wires there mate, what should they connect to and what does it do?
Thanks
tomshaw89
2nd January 2013, 13:54
Is it the egr valve, because if so mine has been removed...
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.