engine mount issues and questions, need some info!

[AzzAW93]

hi basically a while ago i bought an engine mount on the understanding there were only 2 types the fluid type and the non fluid type
as my car has a non fluid type mount i bought a s1 non fluid mount (acorn shaped mount)

anyway today i was fitting a new bracket for the engine mount as one of the three studs had sheered off, while i was there i clocked that my mounts dont match.

heres my mount
http://imageshack.us/a/img688/4032/img2013030900635.jpg

http://imageshack.us/a/img833/7950/img2013030900634.jpg

and heres the mount ive bought
http://imageshack.us/a/img401/7110/img2012111800381.jpg


so basically my question is can this new mount be fitted by me just swapping to the old s1 type engine to mount bridge or will i just have to sell this mount and buy the correct one.
if i have to buy a new one can someone show me the one ill need.

any tips or info let me know!

azza

[Tom5190]

You cant get an uprated engine mount of the one you have matey, There is 3 types not 2 thats the problem.

You need to get the mount cradle welded in so you can use an uprated mount.

[AzzAW93]

ahhh balls

[Tom5190]

Im not sure about using the S1 cradle it could be a possibility i cant remember how they mount off the top of my head.

[AzzAW93]

i think its a possibility ill hate to have a look heres the s1 mount
http://i147.photobucket.com/albums/r310/sonett_01/Citroen%20AX/134-3430_IMG.jpg

[AlexB]

That top part looks like a 16v one not the s1 8v

[AzzAW93]

That top part looks like a 16v one not the s1 8v

ignore that one ;) look at the one underneath haha