TAS Quickshift

[T0BY]

Mr Hush has this in his car, and im after one for my Saxo Furio. Im just wondering if anyone knows the best place (excluding ebay) to order one from?

[DAZ1985]

Never heard of them

[bullit]

im sure gmc do a taz style, pretty sure the original arent made anymore. a lad on ssc used to sell them, he might have a few left.

[GreenSaxo]

you should take a look at www.griffiths-engineering.co.uk and the 106 quickshift... im still to fit mine... but hopefully it be fitted next week.. and can give you a report on it...

[ets2k9]

you should take a look at www.griffiths-engineering.co.uk and the 106 quickshift... im still to fit mine... but hopefully it be fitted next week.. and can give you a report on it...

I'm planning of getting one of those let me know how you get on.

Who the hell is Mr Hush?

[T0BY]

the dude with the blue VTS which used to be on really nice standard VTS rims that everyone wants to buy, but now has white speedlines.

[GreenSaxo]

I'm planning of getting one of those let me know how you get on.

Who the hell is Mr Hush?

yeah.. i will report back to you... remind me via pm next week mate.. im highly forgetful at my age :P

[DAZ1985]

www.griffiths-engineering.co.uk

I've got one of these they are shit hot for the money takes no time to fit 10minutes tops, not as good as B&M but cant beat its value for money.

And they work !!!!!

[GreenSaxo]

thats good to hear daz.. i saved money.. and went and collected mine.. the bloke who makes them is a genious.. to have come up with something so simple.. and make them himself.. he has done work for f1 teams in the past!!

[S507DDL]

i bought the exact one from griffiths engineering and couldnt fit the thing after trying and bracking one of the gear rods in the process so its still sitting in my shed. ???????

[GreenSaxo]

oh.. its one of the easiest things ever to fit.. lol if u werent in another country ;) lol i would offer to fit it :P

[ets2k9]

You can come and fit mine if you want ;)

[GreenSaxo]

if you order one and get it before trax.. if ur at trax.. i will fit it for you there!!! lol

[DAZ1985]

It really is easy to fit as GREENSAXO said its so simple the idea is great and for the money it really is genius !!!!

Same applies to peeps in my area with one who want them fitted drop me a PM and consider it done

[T0BY]

I phones up GMC and one is on its way :D. Will have to have a look around to how to fit it now.

[bullit]

hows this. easier than it reads.
Here's how to fit it...

1. Unclip gaiter from centre console. Remove torx screw holding centre console to gear bearing mount, slide the console back slightly then remove it.

2. Put the car in 2nd gear. Undo the four nuts holding the gear bearing mount to the floor (10mm socket).

3. Lift the bearing mount from the studs and turn it 90 degrees. Let the gearlever flop forward and you will now see the nut and bolt holding the lever to the linkage. Unfortunately you cannot dismantle the lever from the bearing mount at this stage so you will just have to undo this nut and bolt with the access you have (it's fiddly but manageable with a 10mm and 12mm spanner).

Now that the lever/bearing is out you have the choice of smashing this one up to leave you with just the metal shaft, or I'd advise you to get another one from a scrapyard (any Saxo/106 one will do - I paid £.

4. Remove the gearnob (this is a struggle, I'd advise cutting it off and getting another as you will not be able to refit it anyway) and remove the plastic grooves (white on saxo, black on 106) that hold the gearnob on (either with a stanely knife or smash it off with a hammer).

5. Unclip the white ring above the gear bearing and pull the ball out of the mounting. You will not be able to remove the shaft completely but this will give you enough access to smash off the white ball. The lever I worked on had a black rubber ball under this which I also cut off - some have a metal ball. You should now be able to remove the shaft from the bottom of the mounting.

6. Bolt your gearlever back onto the linkage - this will be much easier now with all the plastic and rubber out the way. A tip at this stage is to put some polyurethene grease on the bolt holding the lever to the linkage to avoid wear on the nylon bush. Also don't do this bolt up too tight or the lever will not pivot back and forward and make gearchanging impossible.

7. Take the rubber boot off the bottom of the old plastic mounting and slide it onto the gear lever and down onto the studs.

8. At this point I'd advise placing a spacer (max 5mm thick) on top of the rubber boot cut out the same shape as the bottom of the quickshift (any material will do - I used perspex but ply or even MDF would work). This will give you more room for adjustment.

The next bit will probably need repeated until you get a setting that suits your tastes and avoids the linkage brushing the exhaust heatshield.

9. Slide one of the collars on to the gear lever with the narrow bit upwards. Tighten it at a point just above where the plastic ball used to be.

10. Slip the quickshift onto the lever and down onto the studs and bolt it down (not too tight in case you need to adjust the lever throw). Slide the upper coller on with the narrow bit down and then get a mate to hold the lever tight upwards while you tighten up the coller - this avoids any loose up-down movement in the lever.

11. Once you have a setting you like, tighten up the four nuts holding down the quickshift, fit a gearnob, and drive off for quicker 0-60s!
bullit is online now Add to bullit's Reputation Edit/Delete Message

[Mr_Hush]

the dude with the blue VTS which used to be on really nice standard VTS rims that everyone wants to buy, but now has white speedlines.

its me LOL :D:

[RallyeNick]

I know this is a very old thread, but.... Has anyone got a GE Quickshift for sale? :)

[smittytom]

I know this is a very old thread, but.... Has anyone got a GE Quickshift for sale? :)

wrong section try the wanted section.
You can get GE quickshifts new for £23

[RallyeNick]

I know mate, but..

a) More often than not, forum communities prefer you to dig up old threads by using the 'search' criteria rather than repeating posts.

b) I'm a new member and need to post 50 times before posting in the 'wanted' sub-forum.. It's a case of posting here or spamming 47 times just to ask them same question :)

If you, or any other moderator could set me up with a wanted thread, I'd be grateful :)

[KamRacing]

theres a link above to the GE engineering website. They are cheap new so you will only save the cost of a pint of beer buying second hand.

If you want a Tas style one then the compbrake one is identical. Compbrake is the new name for Tas.