PDA

View Full Version : Coilpack images


piranhamatt
25th March 2013, 23:54
Hey guys I'm looking for an image of the coilpack on a vts.

I'm connecting a omex rev limiter and have to connect to the negative terminals and want images before attempting cutting anything..

Have searched a few places but nothing was clear enough..
Any help please. Need pics of these

Ali123
25th March 2013, 23:56
you should have a light blue wire and a white one, those are the two you connect it to

piranhamatt
25th March 2013, 23:59
Thanks lol- I mean before I start looking where are the wires located? So I can go to them straight away- do know which is the coilpack though

MartinObviously
26th March 2013, 00:00
Put the ignition and probe the connector with a multimeter. There will be a constant feed to the coil pack. you can establish positive and negative from there in 2 mins.

There are 2 feeds and 2 negatives. as it's dual coil (I guess who have a twin coil limiter?)

Ali123
26th March 2013, 00:06
take the top plastic cover off and the coilpacks there mate, but , you dont even need to do that, just unplug the plug going into the coilpack at the top on the right hand side of the engine, strip back the tape etc and look at the wires leading into the plug mate

piranhamatt
26th March 2013, 00:20
And both negative ones will be there in the colours you specified?

Sounds good I'll have to check that out this weekend

Thanks!

Ali123
26th March 2013, 07:17
And both negative ones will be there in the colours you specified?

Sounds good I'll have to check that out this weekend

Thanks!

Most likely yeh mate, I know sometimes they do differ in colour but that's what it is on mine