Alex
26th May 2013, 13:02
Hopefully nearing my decision, just looking for opinions from people who have had either.
Option 1
Use this sandwich take off with an inline thermostat.
http://www.ebay.co.uk/itm/150836003928
Has port for temp sensor which is what I want too.
Only thing I'm not sure about is if the filter can still go on the sandwich plate after.
I'm guessing an inline thermostat would still feed oil back bypassing the cooler until it warmed up.
Option 2
This uses the mocal sandwich plate with thermostat.
But to have a temp sensor I'll need another sandwich plate.
Didn't want to have to much protruding off the block and more points of potential leaks.
Option 1
Use this sandwich take off with an inline thermostat.
http://www.ebay.co.uk/itm/150836003928
Has port for temp sensor which is what I want too.
Only thing I'm not sure about is if the filter can still go on the sandwich plate after.
I'm guessing an inline thermostat would still feed oil back bypassing the cooler until it warmed up.
Option 2
This uses the mocal sandwich plate with thermostat.
But to have a temp sensor I'll need another sandwich plate.
Didn't want to have to much protruding off the block and more points of potential leaks.