Cams

[utothek]

Looking at getting a cam for my 8v.. is it worth it or not?

[rkenyo]

Unless you've got money to burn then no!

I have a mk1 vtr (90bhp std) - fitted newman ph3 camshaft, Baker BM adjustable pulley, remapped with 7k rev limit, rallye inlet manifold and throttle body, supersprint 4/2/1 manifold and straight throuigh race pipe along with a few other things, very quick off the line around 6.8-7.0 seconds flat to 60mph, it's got a printout on the rollers for 118bhp.

it's a lot of fun but for the price of all this exceeding 1.5k you may aswell 16v it unless you have a paticular thing for 8v's - it does sound awesome though!

[rkenyo]

Unless you've got money to burn then no!

I have a mk1 vtr (90bhp std) - fitted newman ph3 camshaft, Baker BM adjustable pulley, remapped with 7k rev limit, rallye inlet manifold and throttle body, supersprint 4/2/1 manifold and straight throuigh race pipe along with a few other things, very quick off the line around 6.8-7.0 seconds flat to 60mph, it's got a printout on the rollers for 118bhp.

it's a lot of fun but for the price of all this exceeding 1.5k you may aswell 16v it unless you have a paticular thing for 8v's - it does sound awesome though!



And it destroys fuel - roughly 80-90 miles off £20 vpower!

[Gandi699]

7 seconds 0-60 with 118bhp? and what gearbox does it have?
Sorry but I dont buy that

[rkenyo]

7 seconds 0-60 with 118bhp? and what gearbox does it have?
Sorry but I dont buy that

You don't have to buy anything! this is advice for someone else.

running vtr box, and it annihalates a friends 106 gti which is std aparts from a 4/2/1 mani, backbox, and cda induction

[Gandi699]

Not doubting it doesnt pull well etc, just think its a bit optimistic considering the gti has more power and torque, plus a gearbox without insanely long ratios.

I just read that those mods cost you £1500, so my advice to the OP if you have to stick to 8v is a rallye top end conversion with associated ecu and loom, vernier, breathing mods all the usual would give you those close to figures for a third of the cost if that, taking into account renewing gaskets etc.

[martin1985]

You don't have to buy anything! this is advice for someone else.

running vtr box, and it annihalates a friends 106 gti which is std aparts from a 4/2/1 mani, backbox, and cda induction

how would it do that when it has less power than the gti?

p.s vtr box is shite

[Gandi699]

haha cam and remap shaving 2+ seconds from the 0-60 time, especially when running the standard gearbox. Complete bollocks really lets be honest

[martin1985]

haha cam and remap shaving 2+ seconds from the 0-60 time, especially when running the standard gearbox. Complete bollocks really lets be honest

agreed :y:

[rkenyo]

haha cam and remap shaving 2+ seconds from the 0-60 time, especially when running the standard gearbox. Complete bollocks really lets be honest

what a cunt! lets be honest, you don't really know the ins and outs of the work that has been done really, this was posted as helpful information to aid a beginner from "my experience" but as usual the keyboard warriors are all out in full-effect! clearly nothing better to do eh?

[Cam]

Lol ^^^.

[Gandi699]

what a cunt! lets be honest, you don't really know the ins and outs of the work that has been done really, this was posted as helpful information to aid a beginner from "my experience" but as usual the keyboard warriors are all out in full-effect! clearly nothing better to do eh?

Helpful info also known as bullshit then?

[rkenyo]

Helpful info also known as bullshit then?

Not at all as said "from my experience" of my car, which has been family owned and maintained since new, can't speak for everyone as i'm sure not everyone would look after their cars to that same high standard!

[Gandi699]

Well i'm not disputing that, everyone is entitled to their opinion. Care to explain the "ins and outs" of whats been done to yours?
Will kill some time, as I genuinely do not have anything better to do, at least before 5pm

[P33TGR]

Get a job then!

[f13sta]

mates 106 quicksilver with vtr engine+ gearbox made 106bhp withneman ph3 cam, 4-2-1 ect ect and did 0=60mph is around 7.7 seconds.

[KieranHopkins]

Please don't tell me you had a friend in the passenger seat timing you on his iPhone ...

[f13sta]

Wasn't mine mate. Just quoting a friend. No idea how he did it. But it did get up there pretty quick.

[Chief]

Some fast Saxos out there. That cam looks like its worth it then ;)