106 inlets

[jbrady72]

Will a 106 rallye inlet manifold, throttle body etc fit onto my 51 plate vtr? Its a 3 plug, silver top? Im going to be fitting a 4-2-1 mani and straight through pipe with newman ph3 cams soon so wanting to fit a better inlet system.
Will it go on??

[Bedford126]

Will a 106 rallye inlet manifold, throttle body etc fit onto my 51 plate vtr? Its a 3 plug, silver top? Im going to be fitting a 4-2-1 mani and straight through pipe with newman ph3 cams soon so wanting to fit a better inlet system.
Will it go on??


No, no it wont.

[jbrady72]

No, no it wont.

oh ... :(

[f13sta]

To elaborate on what Bedford has said.
The port spacing on the early engines is different compared to the later head.

[rorz_vts]

To elaborate on what Bedford has said.

The port spacing on the early engines is different compared to the later head.


The port spacing on the 16v heads regardless of year are the same, it's the 8v early and late that have different spacings

[f13sta]

The port spacing on the 16v heads regardless of year are the same, it's the 8v early and late that have different spacings


Yes and as it OP is discussing 8V I thought it prudent not to bother mentioning 16v

[rorz_vts]

Yes and as it OP is discussing 8V I thought it prudent not to bother mentioning 16v


Lol so he is, far to early for me to be on here

[106gavlar]

http://img.tapatalk.com/d/14/02/20/5ade4u3y.jpg
Sorry I had to.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[Jamie]

http://img.tapatalk.com/d/14/02/20/5ade4u3y.jpg
Sorry I had to.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

Why is only the middle of your mani wrapped:wacko:

Cams meant to be inside the engine:wall:

JOKE ish'

[106gavlar]

Why is only the middle of your mani wrapped:wacko:



Cams meant to be inside the engine:wall:



JOKE ish'


This is a really old pic mate, the mani has no heatwrap no and man that stuff is itchy haha. Cam well it popped out whilst driving and landed there.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[Jamie]

This is a really old pic mate, the mani has no heatwrap no and man that stuff is itchy haha. Cam well it popped out whilst driving and landed there.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

fair enough and jokes.

So do Rallye inlets bar look better actually gain?

[106gavlar]

fair enough and jokes.



So do Rallye inlets bar look better actually gain?


Through throttle response yes anything else I do think so really other than the grunt mmm the grunt!


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[Jamie]

Through throttle response yes anything else I do think so really other than the grunt mmm the grunt!


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)


I see, I wanted to fit one to my old VTR back in the day but was told they weren't worth the effort, this was like 10 yrs ago now haha.

Cheers

[106gavlar]

I see, I wanted to fit one to my old VTR back in the day but was told they weren't worth the effort, this was like 10 yrs ago now haha.



Cheers


To be honest if you know what your doing it's easy.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[Spoonaltap]

I've got a 106 inlet mani on my furio and totally not worth the effort in my opinion. Won't idle worth a damn now, had to convert to ht leads and extend wiring and other things. The conversion wasn't difficult but even with an idle control valve fitted to the side of the inlet it will not idle so I've blanked up the ICV and just have a tight throttle to keep it open slightly. It now idles from 600-1200 rpm.