Log in

View Full Version : Fuel rails

Jack-Cooley
2nd February 2014, 13:40
Anyone know any fuel rails with the same positioning as the 106/sax ones?

Sent from my HTC One mini using Tapatalk
axsaxoman
3rd February 2014, 08:30
to fit what --with what type ofconnecttions ?
whats wrong with std one?
tweeqd
4th February 2014, 20:33
Asjohn says why not keep the standard one
I only have a custom one due to using a custom/rover inlet and a cit/pug one wont fit
Jack-Cooley
4th February 2014, 20:44
Thats my exact reason martin.

http://img.tapatalk.com/d/14/02/05/3a5y7ubu.jpg


Sorry john i thouht i had replied it probably didnt send as o have bad signal at work

Sent from my HTC One mini using Tapatalk
Jack-Cooley
4th February 2014, 21:49
Which rail do you run mate

Sent from my HTC One mini using Tapatalk
tweeqd
4th February 2014, 22:01
http://www.ebay.co.uk/itm/8-AN-Fuel-rail-blank-extrusion-350mm-long-/271383193435?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f2fb2e75b

I used one of these and machined the injector poets in to it, alloy welded on some mounts then had some AN fitting and fuel lines made up for it
You will need to run an external fpr

http://i6.photobucket.com/albums/y243/VTRturbo16/image_zps0192861c.jpg (http://s6.photobucket.com/user/VTRturbo16/media/image_zps0192861c.jpg.html)
Jack-Cooley
4th February 2014, 22:05
Do the 'poets' for the injectors need to be simply drilled out or do they need to be differently done?

Fancy building another one for a fee? :D

Sent from my HTC One mini using Tapatalk
tweeqd
4th February 2014, 22:11
Cheeky cunt lol
The ports need to be an exact size so they dont leak, i did mine on a cnc machine
Jack-Cooley
4th February 2014, 22:16
Cheeky cunt lol
The ports need to be an exact size so they dont leak, i did mine on a cnc machine

Now now i was being serious.

What im asking is say its a 15mm hole does the hole need to be cut strsight through at 15

Or does it need to go down so many mm then a small hole just enough to force the fuel into the pickup on the back of the injector?

I could get it all machined up i just need to make sure i explain it correctly

Sent from my HTC One mini using Tapatalk
tweeqd
4th February 2014, 22:38
http://www.sdsefi.com/techrail.htm


Follow the guide above mate
Jack-Cooley
4th February 2014, 22:43
http://www.sdsefi.com/techrail.htm


Follow the guide above mate

Thanks!

Sent from my HTC One mini using Tapatalk