Vts head torque

[Mouldy626]

Hi All. Is there an alternative second stage torque for vts head bolts other than 260 degrees?

[Jigs2895]

Break it down into two stages of 130 degrees at a time. I had the same issue.

[Mouldy626]

Yeah that's I thought you might say, but on angle tightening bolt 5, my hand touched the degree gauge, and moved it slightly. I set it back roughly and carried on. Hopefully itll be ok.

[axsaxoman]

loosen off bolt -reset to to 20nm ,then do the angle again
you could do 3 X 90 degrees --bolts will take it no problem