Camshaft identification

[djkerep]

Hi! Sorry for my bad english, Im from hungary.
I bought a saxo vts 2001 with NFX engine code. It has got 4-2-1 manifold, decat and simota airfilter.
I have a little rough idle and a slow responsive for throttle in neutral. I changed plugs.
I dont know this cam is standard or not. Can somebody help me?
https://scontent-vie1-1.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/13012625_1151243208233435_255579995306342403_n.jpg ?oh=dce258d4019581c18724b151e969ae8a&oe=57AE9011
https://scontent-vie1-1.xx.fbcdn.net/hphotos-xtl1/v/t1.0-9/12718215_1151243081566781_8035987284337664461_n.jp g?oh=518939a749c2cd3dbd4b59b6b6ffc47d&oe=57828B3A

[djkerep]

https://scontent-vie1-1.xx.fbcdn.net/hphotos-xtl1/v/t1.0-9/12718215_1151243081566781_8035987284337664461_n.jp g?oh=518939a749c2cd3dbd4b59b6b6ffc47d&oe=57828B3A

[djkerep]

http://kepfeltoltes.hu/160414/12718215_1151243081566781_8035987284337664461_n_ww w.kepfeltoltes.hu_.jpg
http://kepfeltoltes.hu/160414/13012625_1151243208233435_255579995306342403_n_www .kepfeltoltes.hu_.jpg

[djkerep]

Sorry :)
http://kepfeltoltes.hu/view/160414/13012625_1151243208233435_255579995306342403_n_www .kepfeltoltes.hu_.jpg
http://kepfeltoltes.hu/view/160414/12718215_1151243081566781_8035987284337664461_n_ww w.kepfeltoltes.hu_.jpg

[welshpug]

probably standard.

take the pulley off and look for markings.

[djkerep]

probably standard.

take the pulley off and look for markings.

Thanks. I looked, i saw it standard. And what do you think about my fault code?
p1327. Sometimes it turn on my MIL. I have a little rough idle(1050rmp) when cold and a lumpy maybe missfire idle when hot. I tried to change spark plugs, and clean the little black box with 1 cable on the side of the head.
It may be a knock sensor or ignition coil? I cleaned the throttle body too.

[djkerep]

Thanks. I looked, i saw it standard. And what do you think about my fault code?
p1327. Sometimes it turn on my MIL. I have a little rough idle(1050rmp) when cold and a lumpy maybe missfire idle when hot. I tried to change spark plugs, and clean the little black box with 1 cable on the side of the head.
It may be a knock sensor or ignition coil? I cleaned the throttle body too.

And when i try to start when the engine is cold, it crack a lot.

[Spendyrx]

Yeah I've just done a bit of reading, p1327 seems to be pointing to the coil pack failing!
Try find a friend and 'borrow' their coil pack, that's where I would start!

[djkerep]

Thanks!
Is you heater motor is always on when the engine is running? This is a slow rotate.

[Spendyrx]

Inside heaters? When set to '0' no it stops!

[djkerep]

Inside heaters? When set to '0' no it stops!

Yes. The inside blower motor is always on in "0" position. In "1" it is a little faster. What is the problem? The switch or the blower resistor?

[welshpug]

if it has AC it'll spin all the time.

[djkerep]

if it has AC it'll spin all the time.

Why? yes it has AC.

[welshpug]

that's normal for ac models.