PDA

View Full Version : Chip wizards ? Map vtr 3 plug ecu


jamie8v
14th September 2016, 13:52
I know chip wizards can unlock n map the vts ecu for boost so I'm presuming they can do the same to the vtr ecu?

Mickswan
14th September 2016, 15:48
Seen a post a while back saying he's done tons of S and R. Drop him a mail

KamRacing
15th September 2016, 12:12
Try Alive Tuning.

Kindest regards
Kev

Chipwizards
15th September 2016, 21:39
Yes I can. It's an M7.4.4 ECU in a 3-plug VTR.

I'm not aware of anyone else who can, but someone may be able to. The vast majority of 'mappers' just copy/paste and buy files rather than actually knowing what they are doing and developing their own. If a tuner says "We can do any car" they are just buying files because the job is far too complicated to be able to do all cars with any degree of success.

For a turbo you need bigger injectors and a different MAP sensor, both of which I can supply but if you choose to get them yourself you MUST use genuine parts or I WILL NOT do the job. Cheap shit Chinese copy parts end up being very very expensive in the long run.

welshpug
16th September 2016, 12:03
theres loads doing maps on the later bosch ecus as they're on turbo stuff like saabs and volvos.

Chipwizards
17th September 2016, 20:59
theres loads doing maps on the later bosch ecus as they're on turbo stuff like saabs and volvos.

:-D

Fill yer boots then.... Anyone can do it.....

That's why when I was developing the C2 turbo it only took me about three solid weeks of searching, testing, researching, changing more testing to find everything and make it work properly....

....Despite having worked on thousands of Bosch ECUs since the 1980s....

Should have just banged a Saab turbo file in it... :-)