Fat_boy
16th October 2017, 17:08
Hi all I’m new to the forum and race a vts mk2 in auto grass.
I’ve removed all the wiring apart from the engine loom and then just found out which pins were ign live, fuel pump live and starter and lived them up to switches and I’m good to go. I’ve recently got some cams and want to fit them but obviously wanted to have it remapped once done. Because of the way I’ve wired it only using 3 wires does anyone know how I can reinstall the obd port to get it mapped etc? It’s a single plug Ecu if that helps.
And info would be much appreciated 👍🏻
I’ve removed all the wiring apart from the engine loom and then just found out which pins were ign live, fuel pump live and starter and lived them up to switches and I’m good to go. I’ve recently got some cams and want to fit them but obviously wanted to have it remapped once done. Because of the way I’ve wired it only using 3 wires does anyone know how I can reinstall the obd port to get it mapped etc? It’s a single plug Ecu if that helps.
And info would be much appreciated 👍🏻