Log in

View Full Version : Manifold - Would this fit??

Mark51
27th November 2006, 07:18
looking at this on ebay and want to know if it will fit my Furion 1.4 51 plate?

also what else would i need?

Raceland Exhust (http://cgi.ebay.co.uk/CITROEN-SAXO-MANIFOLD-1-4-1-6-16V-STAINLESS-STEEL_W0QQitemZ150064259775QQihZ005QQcategoryZ3878 6QQrdZ1QQcmdZViewItem)
KamRacing
27th November 2006, 07:56
the furio is an 8v isn't it??

If so you'd need the 8v version of the manifold..

ps there is a group buy on here for raceland
Mark51
27th November 2006, 08:05
so that one wouldn't fit?
if i got that one from the group buy what else would i need to fit it?
mrorange2
27th November 2006, 08:10
What other exhaust mods do you have mate?
Mark51
27th November 2006, 08:30
just back box mate, but getting a full system.
mrorange2
27th November 2006, 08:53
You shouldnt need anything else really then mate. if you had a decat and you have 2 lambdas which i dont know if you do on a furio??? you'd need a lambda sleeve.
Mark51
27th November 2006, 08:59
what about an oil filter relocator???
S34MER
27th November 2006, 09:41
yes mate, you will need to relocate the oil filter!
saxoash
27th November 2006, 09:56
yes mate, you will need to relocate the oil filter!

thought that only applied to mk2 vtr's?
l1ukeRS
27th November 2006, 10:23
furio is a mk2
think its the same as the vtr oil filter
Mark51
27th November 2006, 10:33
so is that a yes then?
if so how?
S34MER
27th November 2006, 11:37
yes, oil filter recloation kit.
l1ukeRS
27th November 2006, 12:52
mk1 filter asnd thread from anythin probly will do it eg 1.1 1.4 vtr vts
then block the hole up left if you have 1 i still dont see why a normal oil pressure sensor cant be used in it but when i do mine i will most likely find out why lol
FILVTR
27th November 2006, 14:23
GMC don't do the oil filter relocation kits anymore as they have a manifold which bypasses the filter.

I have just got new from Citroen a mk1 oil filter and the thread (looks like a tightly wound coil) which screws into the block where the original hole is left.
From what I gather, the other hole which is left has to have something blocking it, threading it maybe??

Haven't done it yet but gonna try it when fitting my new 4-1 manifold
saxoash
27th November 2006, 14:37
GMC get rather pissed off when u ring and ask for one and say you got the raceland manifold iirc think this is why they dont make them anymore.
hesslevtr
27th November 2006, 19:07
GMC get rather pissed off when u ring and ask for one and say you got the raceland manifold iirc think this is why they dont make them anymore.

or maybe the fact gmc make 1 manifold now which fit both new and old vtrs without moving oil filter


i think all racelands fit both vtrs but im not 100% as i have a proper manifold

8v and 16 manifolds are diffrnet
FILVTR
27th November 2006, 22:25
Yeah, I got a Carworx 4-1 and in this same predicament. Having to move oil filter to get it on without melting the filter.
custom_vtr
28th November 2006, 00:51
is there anywhere for the mk2 top lamba to plug into on the mk1 manifold?
samcook
28th November 2006, 01:15
gmc told me that there manifold for a vtr wouldnt fit my furio when i had it, dunno if it would be the the same for a raceland manifold
KamRacing
28th November 2006, 12:36
is there anywhere for the mk2 top lamba to plug into on the mk1 manifold?

not on the raceland. You have to fit it into a blanking sleeve to trick it into thinking its just detecting clean air
FILVTR
28th November 2006, 17:11
Stick it in the sleeve and metal tie it to something which doesn't move in the engine bay. Will do the trick