PDA

View Full Version : quicksilver to vtr!!

sy_VTR
4th January 2007, 13:27
whats in the job of swapping a quicksilver engine to a vtr! what needs to be done! could some one let me know whats in the job! from start to finish! cheers guys!!
Yates
4th January 2007, 13:57
why would you put in a smaller engine?
sy_VTR
4th January 2007, 15:07
106 Quicksilver To A Vtr!
lambinator
4th January 2007, 15:10
engine, gearbox, driveshafts, engine and dash loom.

but you will need to have a 106 dash loom and a saxo engine loom
sy_VTR
4th January 2007, 15:34
Y Do You Need Both Looms!
sy_VTR
4th January 2007, 15:35
Could You Just Explain That Fully Please! Cheers!
lambinator
4th January 2007, 15:53
the dash layouts on a 106 and saxo are differerent. as will be the looms because of the switches such as electric windows, console switches etc. so you will need to get a 106 dash loom. (maybe)

also depends what type of vtr engine you have as the looms on the grey and blacks tops are different.
Dan
4th January 2007, 16:09
PM leeds106 he has done this.
lambinator
4th January 2007, 16:10
PM leeds106 he has done this.

yes pm him