clipz
25th February 2007, 11:01
The other day i posted about how to go about a cold air feed.THis morning i summed up wether it should go on the grille, or in place of one of the foglamps.well, seeing my passenger side foglamp fell off at speed one day, iv decided to mount it in that space.Iv cut a bit of flexible plastic to the shape of the gap where the lamp was, and sanded it down and have just finished spraying it black to match the car.I placed the bit of plastic in the foglamp gap(from inside the bumper) and it sits flush.Next job is to buy a 70 or 80mm diameter induction hose, its gona have to be around 1.5m long to play with.problem i have now is what shall i use to seal the bit of painted plastic (where the hose will eventually embedd into) onto the inside of the bumper? tiger seal crossed my mind but im not wanting it stuck for life...and will no foglight affect the mot? this is the reson im going to need to use a bonder that can be removed with a bit of force!!! job will probs be done and dusted for the end of the week if i can find a suitable bonder....help o help