What manifold do you have ......

[Predator_R32]

or plan on getting and what do you think is best for quality sound etc ???

[Richardson_VTS]

I've got a Pro-Race or what ever its called. The one from ebay. Im not too happy with it, as it dosn't line up to the gearbox properly. Been thinking about getting a new one, probably GMC!

[Predator_R32]

i think ill ask GMC if they would do a group buy on there manifolds

[woodsy]

dont know what mine is but its a 4-2-1 and it works

[saxo_vtr1234]

cituning 4-1 decat

[TheMadSaxo]

No idea of the make but mine's a 4-2-1.

Pulls harder lower down now

[Steve]

I have a gmc fitting it tomorrow:y:

[belly_VTS]

got a raceland 4-2-1, couldnt really feel any difference tbh

[rushy_23]

I did get a Supersprint 4-2-1 manifold but never got it fitted. They have
been recommened on the Saxo/106 scene from since I can remember.

If its tired, tested and good then thats all that I care about, and thats
the Supersprint for you!

[Baz]

i have a citroen one :P

[rushy_23]

^^ LOL

The raceland one is only an option if you cant splash out a bit more money
from what Ive heard.
The GMC ones look good but issues of ground clearance and plus the fact
that a 4-1 influences the engine higher up the rev range kinda puts me off.

[vtr_driver]

Hmm I've also got a citroen one at the moment but am wanting to upgrade it soon. I just dunno what to go for!!

How much is a supersprint?

[bullit]

miltek 4-2-1

[rushy_23]

Supersprint is a bit pricey. looking at around £300 inc postage I think.
I ordered mine for the GTi from my mates place. Was about that price.

[vtr_driver]

Hmm more than I wanted to spend. I'm wanting to spend about £200

[spencer_cammedvts]

supersprint all the way!

[rushy_23]

if its £200 you want to spend then your definatly looking at a raceland buddy!

[Joesnow]

I've got a Pro-Race or what ever its called. The one from ebay. Im not too happy with it, as it dosn't line up to the gearbox properly. Been thinking about getting a new one, probably GMC!

I'm in exactly the same boat as you!:n: Pro-Tech? I just want rid of it! If I had the time id put the standard one back on! I want a 4-1 probably a GMC. Is it just GMC who make 4-1s??

[rushy_23]

Sure there must be other 4-1s around. Not too sure.

[samcook]

you can get piper 4-1s aswell

[bullit]

gmc are selling the piper ones aswell

[rushy_23]

Piper is a pretty decent brandname too.

[Predator_R32]

think im gonna be getting a GMC one now :y:

[VTS_16v_Boy]

Got: Janspeed Mild Steel 4-2-1 (Cracked and blowing like a Bitch)

Changing to: Piper Stainless Steel 4-1

[S34MER]

Raceland 4-2-1 for me, thanks to Landy ;)

[stevenet15]

i got a raceland 4-2-1 and it made no sound difference at all but performance wise it was good

[vtr_driver]

Hmm mixed reviews for the Raceland. How much am I looking at for a GMC?

[hesslevtr]

stop been fucking gay and get the GMC one

[Colin]

I have a Miltek 4-2-1 and Im impressed with it.

I would like a GMC or Piper in the future.

Col.

[Steve]

I thought the gmc's were piper :panic:, the one i have from gmc has piper plate welded on it.

[riggsy]

Soo many to choose from, its very hard to say what to get unless you have experimented with all of them....

[FILVTR]

I've got a heatwrapped CArworx 4-1 manifold. Noticed a difference - especially from 3000rpm onwards, just keeps going whereas before it slugged all the up.

Get a 4-1 for a VTR whatever.

[Karl]

how much are GMC and for an S is it better to get 4-2-1 or 4-1?

[riggsy]

I have a gmc :)

I was walking to some one on msn the other that has had the gmc 4-1 but now has a stainless 4-2-1 supersprint, he said the gmc sounds alot better but the super sprint is better performance wise!?

[vtr_driver]

From what I've read for a VTR the 4-1 manifold is the best to go for. I was looking at the GMC 4-1's which are approx £250 I think. I'll hopefully be purchasing one around May time LOL

[MaRiO89]

i have a 4-2-1 raceland one and its actually really well made etc.

Fitment was good too no modifications needed doing either, i recommend them but i dont hink you can get them on ebay anymore! :(

[Foggy]

Got a Withy 4-2-1 wrapped manifold which is sized to the exhaust outlets on the head and the exhaust gasket.

[Mystic]

Well, before i voted i expected to see a big long block for the GMC, i'm pretty shocked!

I'v got a raceland 4-2-1 but onoly because Kam-Racing put on such a good deal for us, still havnt got round to fitting though :sad:

[riggsy]

Gmc are expensive thats why.

[MaRiO89]

For price, value and performance the raceland one is the best imo, its over £100 cheaper than GMC ones etc. As for quality well the exhaust place who fitted it were very impressed with it..

There will be drawbacks compared to the others i expect but your saving over £100 which could be spent elsewhere on other mods! :)

[riggsy]

Gmc is 4-1 though so the power is different, maybe thats why its more expensive....

[P47KER]

A few people seem to be knocking the pro-tech mani's. I have one fitted to mine and has been fine.

[DAN-VTS]

How much are the GMC manifolds?
Im looking on GMC motorsport website and they are 180 quid :S
thought people was saying they are expensive, or am i looking at the wrong one :panic:

[Neil_H]

I have a milltek 4-2-1 on my vts, quality seems good so pretty pleased with it.

[boz]

i had a gmc 421 on the vtr and now have a raceland to go on the vts.
the gmc was a good mod for the vtr, seemed to pull alot better when fitted, but i fitted it along with a full system, decat and green cotton filter.
not got the raceland on the vts yet, will post the diff when its on :)

[WestyVTR]

i have gmc 4-1 - expensive but you get what you pay for imo. thats y i use GMC for advise & good quality products deliverd quickly

[WestyVTR]

Got: Janspeed Mild Steel 4-2-1 (Cracked and blowing like a Bitch)

Changing to: Piper Stainless Steel 4-1

stainless can be brittle and mor elikley to crack than mild steal! :oops: