Gold VTR - !UPDATE 21/07/07! The End Of The Thread R.I.P Saxo! Sneak Peak Of VTS

[Richardson_VTS]

Looking good fella. Wheres your radiator fan gone?

[Steve]

Looking good fella. Wheres your radiator fan gone?

its round the back of the radiator on 90bhps :homme:
will get that pay pal to you later on mate :y:

[Steve]

Todays Plans


Fit Lower Strut Brace (if it will fit, doesnt look hopeful)
Paint Calipers Gold When I Get To Scotland
May Fit New Mintex Pads Not Sure :homme:



What do you lot think of the plans? making right choice for colour caliper?

To do the calipers do i just wire brush them, then de-grease, rinse, dry, Paint????

[Richardson_VTS]

What do you lot think of the plans? making right choice for colour caliper?

To do the calipers do i just wire brush them, then de-grease, rinse, dry, Paint????

Yeah exactly that fella.

[Steve]

Yeah exactly that fella.

cool, hows the new s? taht brace looks bent! in one corner it looks crimped, waiting for richie to get up and ue the pit, couldnt get enough leverage when had it jacked up, or does the car need to be jacked up to fit as wheels off the deck, the nuts were dead tight!

[Richardson_VTS]

New S is perfect lol

The brace was fine for me bud. i had to put it over the drivers side bolt first then the passenger side. I had the car jacked up off the ground yeah. and the nuts are tight to start with, just slap abit of WD on 'em!

[Steve]

New S is perfect lol

The brace was fine for me bud. i had to put it over the drivers side bolt first then the passenger side. I had the car jacked up off the ground yeah. and the nuts are tight to start with, just slap abit of WD on 'em!

will bare that in mind! should only take few mins to fit?

[Steve]

cant get the fucking bolts un done! cant get in with socket set either! rrr!
away to scotland this afternoon looks like its raining where am going so might give the painting a miss!

Got magnex centre section and de-cat pipe, so will get magnex system on this week! may leave it till saturday doubt i can wait that long though!

[Steve]

had few people asking about parts for when i steer away from gold/black theme, but now am feeling black rally decals??? got a post in photoshop section for someone to have a crack at.

If looks wank then its back to standard but lowered with magnex exhaust.

Speaking of exhausts magnex cat-back arrived today so that will be going on at 5.15 tonight :y: not fitting the de-cat pipe just yet! Will keep up to date!

Still to do, possible for tomorrow as weather has been wank!

Calipers Gold
Mintex Front Brake Pads
Timing
Tappets
Fit Lower Strut

Sell Car ;)............... not

[Steve]

Magnex is on........ looks gay :homme: photos to come later today

[Steve]

Magnex Fitted.... Sounds good dont like the look of it, does it sit too far back?

2 snaps of it, not the best.....

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/e5a9dccd.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/1d09c61a.jpg

Not bothered fitting de-cat pipe yet, would hav given it a clean but the weather is wa*k :(

[ChrisJ]

Nice mate. Looks like its sitting fine to me.

[riggsy]

Sits nice.

Magnex rocks!

Get that rear wiper off :)

[Steve]

Sits nice.

Magnex rocks!

Get that rear wiper off :)

you rekon? i use my wiper though, i think the magnex looks cak :n: would look better with standard rears imo

[samcook]

looks like its sitting spot on mate!

[Steve]

looks like its sitting spot on mate!

cheers, think al return the car to standard soon, leave it lowered, standard alloys, standard lights, magnex zorst + gmc manifold and thats it! get some decent ice!

Or if i get employed after my apprenticeship then keep it as a track day car, strip it out! :afro:

[Dan]

Looks ok to me mate too.

[Steve]

Quick Wash

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/75215514.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/0919cee9.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/fd6470db.jpg

Also relating to my thread about the exhaust bouncing, noticed i should have angled the back box more so the pipe didnt sit as low.

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/68891e47.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/fd428b17.jpg

[Predator_R32]

very nice mate looks good to me, have any problems fitting it then??

also did it have 3 hangers on the backbox??

[Steve]

very nice mate looks good to me, have any problems fitting it then??

also did it have 3 hangers on the backbox??

No problems at all, we had the whole system on in 10 mins! Tried moving the pipe tonight cant move it as no more give in teh rubber hangers.....

Yeah it has 3 hangers on the backbox, sure i used the right one! could have used the other one you think? that make it higher? i though it was a vts as the hanger on vts is different?

[Predator_R32]

might do mate, ill have a look at minetomorrow for ya to see which ones i used but tbh it looks ok to me

[Steve]

might do mate, ill have a look at minetomorrow for ya to see which ones i used but tbh it looks ok to me

i didnt use the long straight one :y: seems to sit fine, as said in problems section its a bit bouncy! not loads but when look under car its moving a fair bit!

[Saxy1]

looking good !!!

[k2thecsaxo]

looks good mate nice saxo !!

[Hopcraft]

looks to be sitting well

[Stu_vtr]

Coming along nicely mate.

[Karl]

really like that pal!

[Viper]

looks realy good!! looks to sit perfectly.

[Steve]

cheers for comments :y:

[jimbo06]

the magnex looks spot on, sits well. How you finding the spax springs then mate?

[boz]

looking good matey ;)

sits better than mine lol
mine seems to stick out more :(
going to have to sort it when im back home

[Steve]

the magnex looks spot on, sits well. How you finding the spax springs then mate?

very soft :homme: but its got rid of the noises i was getting from the suspension, we didnt even need to clamp them down to get them off, if you look at photos of the springs on previous pages you can see how short they were, car seems to sit more level now aswel.
I forgot when i had the car lowered at the rear i didnt have the back seats in, so the car will be sitting slightly lower at the rear with the seats in :( nothing that cant really be sorted.


Now i am in a dilema, do i return the car to standard now? leave it lowered with magnex on, or continue with the gold black theme? need assistance!

[saxo2tone]

cars look-in sweat exhaust sitting purrrfect

[Steve]

cars look-in sweat exhaust sitting purrrfect

cheers :y:

[Steve]

looking good matey ;)

sits better than mine lol
mine seems to stick out more :(
going to have to sort it when im back home

We pushed it on using leg muscle :y:

[jimbo06]

Now i am in a dilema, do i return the car to standard now? leave it lowered with magnex on, or continue with the gold black theme? need assistance!

IMO the gold and black theme looks really really good hence why i am going down that route. but on the other hand it has been done time and time again which has made me think twice about carrying on with it.
Your car is coming along very nicely mate with this theme, and gold is one of the best colours to match with black.
You could colour code it which would change the look of the car/freshen it up, but would also still keep the theme going.

[Steve]

IMO the gold and black theme looks really really good hence why i am going down that route. but on the other hand it has been done time and time again which has made me think twice about carrying on with it.
Your car is coming along very nicely mate with this theme, and gold is one of the best colours to match with black.
You could colour code it which would change the look of the car/freshen it up, but would also still keep the theme going.

am so unsure what to do, i seen a standard one the other day and thought it looked awesome!

[Predator_R32]

carry on with it mate looks great :y:

[rushy_23]

i like it as it is mate!

[mark16v]

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/e5a9dccd.jpg


Car looks alright to me, perhaps a black set of speedlines next ??:y:

[Steve]

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/e5a9dccd.jpg


Car looks alright to me, perhaps a black set of speedlines next ??:y:

yeah suppose just money, dont like the ultra jewels anymore :n:

[Steve]

Magnex back box is coming off :panic: over tightened the clamp last night and fucked the thread lol, will take the bolt off and get new bolt! or just put a nut on the end! Its not fully off but now sticking out a fair bit :(

Took some videos of the exhaust tonight, accidently over done the revs and span a bit much, never done nothing like that before but think al still post it!
Just uploading now!

[Steve]

Slow Drive Off Nothing Special
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/th_3d969775.jpg (http://s134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/?action=view&current=3d969775.flv)

[Steve]

Faster get away, need to wait till 51secs for em some come back.
Once again nothing special, will edit the other one first lol
Wheel spin looks chav haha
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/th_e1b4b32b.jpg (http://s134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/?action=view&current=e1b4b32b.flv)

[Steve]

The magnex exhaust video
edit video before the old girl takes off!
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/th_3c9897c5.jpg (http://s134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/?action=view&current=3c9897c5.flv)

Couple snaps, how shite the backbox is sitting, will sort that this week :homme:
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/e1258a02.jpg

Wooopppps
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/60d6758a.jpg

[jimbo06]

Car looks alright to me, perhaps a black set of speedlines next ??:y:

as long as they arent chrono's then they really will look like twins lol
car sounds nice mate, text book magnex.

[Steve]

as long as they arent chrono's then they really will look like twins lol
car sounds nice mate, text book magnex.

i like the ones riggsy has ;)

[jimbo06]

i like the ones riggsy has ;)

yeah comp 2's would look awsome aswell

[Steve]

yeah comp 2's would look awsome aswell

Will do a photoshop, was wanting some oz chrome upltraleggas :homme:

[Steve]

just an update, new clamp on the backbox to centre section, bust the threads, put a different type of clamp on so should do a better job :y:

[Steve]

Bit of an update, got stuck in the drive! Centre silencer full on twated the kurb when coming out the drive, luckly wasnt going fast, doesnt seem to have done much damage, the back of the centre silencer has a few scraps and a tiny dent on the lip!
Jacked it up tighten all nuts and checked it isnt blowing!

Struggled getting into my drive though it grinded in and out :( Didnt realise how low my car sat since put the spax springs on cant fit my feet under the sideskirts when stopped half over the path :panic:

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/f95e8988.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/65ceb018.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/bb584ff6.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/17b544da.jpg

New clamp
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/f156480a.jpg

Back end of the silencer a bit scraped
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/e6568fb7.jpg

And an exhaust close up :y:
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/a8c4c1b2.jpg


Shouldn't have done any damage to engine or manfiold? it did stop the car when hit it though!

[funkmaster-fresh]

yeah baby, low is the way to go! w00t!

in response to your question a few pages earlier, should you go back to standard or keep goin with the gold/black theme..

i think u should do a bit of a combo of both..
i like the gold black theme, but i dont like black wheels!
standard vtr wheels, not polished ones or any of that, just real shiny, smoked back lights, black badges on back, and front..
now i reckon that would look good!
enjoyed the vids of ur sax too mate, sounds well!
altho i agree with ya, i rather the look of the standard exhaust, tho that one u have sounds well! keep up the good work!
ill hopefully update my thread sometime soon, have a few plans for her which i should get done middle of june! :)

[Skorpion]

Mate I would just leave the car at the top of the drive! Or move! Car's looking good mate!!

[Luke]

Bloody hell, that looks really close mate.

[saunders]

how low is it? F**k that s low. Lucky you didnt cause any damage

[Steve]

its 40mm! cos drive on slant, tahts my drive but got stuck at my gf's! Took a chunk out of her drive, i only put it in my drive to get out the rain when checking the zorst!

Cheers for comments :y:

I wont be going over any bumps from now on! Glad there wasnt any damage either!

[Steve]

oh and got my magnex sitting spot on compared to the videos the other day!

Fitting richie2104's manifold tomorrow so clean on sunday and get some photos up :y:

[Steve]

The Cleaning Session

Woke up at 8 so thought i would clean the car, went got some petrolium (slow drive there and then to the shop), got to halfruads 10 mins early didnt open till 10. So waited like a plumb, there was a fair few whores waiting to get in though.

Got some essentials, not really just tyre shine interior shampoo and some autoglym car shampoo as sick of tescos wash and wax!

I hand washed it last night but there was still some dirt so a quick trip to tescos hand wash and £2.30 later.

Wash down with power shampoo.
Wheel cleaner
Soap and brush (i know its bad, only did on thick parts of mud around the archs)
Power rinse
Wax
Then mineral water or what ever.

Bck to mine

Chomooo mother fu**er (choamis leather) the car.
Turtle wax nano tech polishing wax pasted the car
Hand buffed with valleting cloths (didnt bother with power polisher)

Then i took these photos while weather was good, didnt come out aswel as i would have liked.
note: i had not finished cleaning, still had to do wheels, glass tyre shine and interior (there are no before and after photos either :homme:)

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/6461aef0.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/b69d5ddc.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/d38b77e5.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/4ddf4207.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/6bf8b2ff.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/cc6cb75b.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/4287508b.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/c7f45c3d.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/d8826dee.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/2f05e28e.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/57b7ef24.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/1e7905e7.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/4797791a.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/726316f1.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/f58df1ce.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/5fd13744.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/6bbb4877.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/91f688a4.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/aae03de7.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/e231e38a.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/7ffd147b.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/91ffdb72.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/8efaca78.jpg

[Steve]

Todays buy
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/163ae06e.jpg

The products so far :homme:
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/c7c40207.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/b48d07d0.jpg

So after took pics, it was clean wheels, wax them, tyre shine!
Hoover interior, shampoo and wash!
Hoover again!
Its now drying out and about to rain :y:

Interior cleaning
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/214e464d.jpg

The rinsing bucket
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/11f2971e.jpg

comments welcome!

[R085_VTS]

Cars looking very nice now mate, one question, i noticed in a previous picture that your bumper had a gap all the way along below the headlights, but now thats gone, just wandering how you sorted it :)

[Mikey]

great looking saxo mate!!!

[Steve]

Cars looking very nice now mate, one question, i noticed in a previous picture that your bumper had a gap all the way along below the headlights, but now thats gone, just wandering how you sorted it :)

it had a new wing fitted, garage took it off, and put it back on :y:
they acutally sprayed it for free :afro:

starting to sit bit lower again now though :n:

[Predator_R32]

looks good mate, but for gods sake throw the sponge away and get a lambswool wash mitt and microfibre one, throm chamois leathers away and buy a waffle weave towel, and finally throw the cloths away and get microfibre cloths

[Steve]

great looking saxo mate!!!

much appriciated :p

[rushy_23]

Starting to really like these Gold saxos.

[Steve]

looks good mate, but for gods sake throw the sponge away and get a lambswool wash mitt and microfibre one, throm chamois leathers away and buy a waffle weave towel, and finally throw the cloths away and get microfibre cloths

all in good time, the sponge is for the wheels and archs, hence its sponge colour/black theme :y:
think i get my first initial whore cleaning badge then???

Forgot to add i cleaned in between where the door shuts, nearly took wheels off and did arches but am too tired, thats next week and will do calipers gold :y:

Scared to drive it now.....

[Ben_Halco]

car is lookin very good..

well done,,,keep it up :y:

[R085_VTS]

One cheap mod id reconmend doing... Plain number plates, they totally change a car IMO.

[Predator_R32]

good good :) you had a play with that exhaust yet??

[yerdusk]

looking good mate!!

[Steve]

One cheap mod id reconmend doing... Plain number plates, they totally change a car IMO.

was going to get plain plates but have them in french style if you get what i mean, but without the f on the side....
as i have a difference plate on the back to the front for some reason lol :panic:

[Steve]

good good :) you had a play with that exhaust yet??

meaning getting it to fit?
if you mean that yeah i tried, bust the clamp and then the thing slid off 2"'s or so, its in a previous page in a video can see how bad it sits, so new clamp and left it! it doesnt catch but centre does :homme:

[Predator_R32]

the centre section catches??

you got a picture of that, what clamps are you using??

[Wayne]

car's looking good mate:y::P

[Steve]

the centre section catches??

you got a picture of that, what clamps are you using??

the silencer only catches if i go in the drive :homme:
photos on previous pages...

[Steve]

car's looking good mate:y::P

cheers mate :y:

[k2thecsaxo]

cars looking ace mate

[Steve]

cars looking ace mate

cheers :p

[Liam_]

Car looks very suave matey, some great pics there aswell!

We should gather the NE massive for a photoshoot sometime :y:

[thadogg]

very nice mate, good job :y:

[Hopcraft]

car is sitting perfectly now mate, and does look v clean !

[Steve]

car is sitting perfectly now mate, and does look v clean !

cheers, sits a lot better on the spax springs :y:

[Steve]

Car looks very suave matey, some great pics there aswell!

We should gather the NE massive for a photoshoot sometime :y:

get it arranged :afro:

[jimbo06]

looking very clean in them pics mate. next time you do it, use the auto glym shampoo, then try the autoglym srp, the do it with the autoglym egp. it will sparkle more than the inside of fort knox :p

[Steve]

looking very clean in them pics mate. next time you do it, use the auto glym shampoo, then try the autoglym srp, the do it with the autoglym egp. it will sparkle more than the inside of fort knox :p

expensive shit, with the polish dont need electic polisher? be alright by hand? :y:

[jimbo06]

expensive shit, with the polish dont need electic polisher? be alright by hand? :y:

fine by hand mate thats what i used on mine, its top stuff.

[riggsy]

Still unsure on the colour...

Nice and clean though :)

[Steve]

Still unsure on the colour...

Nice and clean though :)

unsure on the old gold :p

[Steve]

:panic: the leak is back :( been fine for months and months in pissing down rain storms and everything!

Went out today and there isnt a puddle just a few splashes on the carpet where leaked in from behind dash, carpets bone dry thank god looks like needs more silicone!

Gutted :n:

[R085_VTS]

i have a leak bud, its saxo dont worry about it lol as said before lovely looking car :).

[mallboy]

unlucky mate, hate leaks. hope you sort it out mate:y:

[Steve]

what should i do next to the car? am stuck for ideas? not got enough money to get into motorsport so cant turn into track or rally car yet :( bit bored of it now!

[R085_VTS]

If it was mine bud, i would save for some new wheels like some speedline comp2's and a cheap one, some new plain numberplates cause the blue clashes with the rest of the colours. Although personally i think it looks pretty much perfect now... :)

[Steve]

If it was mine bud, i would save for some new wheels like some speedline comp2's and a cheap one, some new plain numberplates cause the blue clashes with the rest of the colours. Although personally i think it looks pretty much perfect now... :)

i fancy some plain french plates :y:
i want some black speedlines just have to be cheap the 5 spoke ones, is that the comp2s?

nothing else i can think of now????? :panic:

stunner tyres that are on the car now are shite in the wet, straight line touch the gas a bit just spins :homme: total crap........

[R085_VTS]

Get some Michelins :):)

[jimbo06]

i fancy some plain french plates :y:
i want some black speedlines just have to be cheap the 5 spoke ones, is that the comp2s?

nothing else i can think of now????? :panic:

stunner tyres that are on the car now are shite in the wet, straight line touch the gas a bit just spins :homme: total crap........

see riggsy's thread he has speedline comp2's on, they would look spot on.
i have yoko a539's on mine and i think they are really good tyres, i would recommend them.
are you bored with the look of the car or its performance or something else mate?

[Steve]

see riggsy's thread he has speedline comp2's on, they would look spot on.
i have yoko a539's on mine and i think they are really good tyres, i would recommend them.
are you bored with the look of the car or its performance or something else mate?

mainly looks, performance yes on the motorways, country lanes no :homme:

[Steve]

Just scrubed my brake calipers down! well the front ones anyway!
The other night i though i had hit a bird, sure enough waiting on calipers to dry, pop the hood and there it is stuck to my rad, not too photos as felt a bit bad for hitting it!

Will get some pics up when am done, not tootally cleaned them just enough for the paint to stick! as didnt have de-creaser and cant be fucked to buy any, so wire brush and some soapy water :y:

[Steve]

Here we go, i think they look good :y:
I did the fronts, didnt plan doing the rears, so let them dry cleaned car then did the rears.
Only washed car with autoglym shampoo and choamised down!
Simonz back to black the bumpers, shampoo'd interior and thats it, i think looks clean for what has been done!

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/437ff112.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/2f6b2587.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/15bc08be.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/902138b0.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/0bf76bd2.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/91df53d0.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/2b1f125e.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/6dd6a55a.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/c6919c2c.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/30172124.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/83eae580.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/bf79a81c.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/181f0cec.jpg

Reflection off richies bonnet
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/12c26d9d.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/9ac2baef.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/3f5a86ec.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/58e6e497.jpg

[Steve]

A photoshoot with richie (http://www.saxperience.com/forum/showthread.php?p=1205779)

enjoy :y:

[Mikey]

loving the gold calipers very bling lol

[Steve]

loving the gold calipers very bling lol

cheers ;)

[James]

Looking good man, like both cars :)

[Harv]

both cars are looking ace! Love the callipers mate - look alot better :y:

[Steve]

my 5,000 post :homme:

[Liam_]

Nice job with the callipers matey, need to get mine done soon. :)

Did ya brush paint them?

[Predator_R32]

looks great mate, safety gone out of the window with just the jack though :p

you also need some nut caps :y:

[supersan]

bling bling calipers. how and what u lick them with?

thanks.

san

[Steve]

Nice job with the callipers matey, need to get mine done soon. :)

Did ya brush paint them?

yeah used a brush! didnt de-grease them, wire brushed soaked with fairy liquid and a sponge! wire brushed, let dry (didnt take long was read hot) and painted! :y:

looks great mate, safety gone out of the window with just the jack though :p

you also need some nut caps :y:

safety lol :homme:

bling bling calipers. how and what u lick them with?

thanks.

san

hammerite smooth gold mate! the smallest tin, hardly used any and gave them a good heavy few coats :y:

[Steve]

i did nearly paint the struts gold! then thought dont be stupid! might do them black soon though :y:
or yellow :homme:

[Karl]

very nice.

[Steve]

very nice.

thank you :clapping:

[saunders]

Looks good mate, yea don't do the stut braces in Gold. They wil just look lost, black would look ok, but perhaps another colour that will stand out is needed?

[Steve]

Looks good mate, yea don't do the stut braces in Gold. They wil just look lost, black would look ok, but perhaps another colour that will stand out is needed?

the strut brace to be black, i mean the acutal strut :homme: if look where painted the calipers teh struts all rusty! yellow would look good! lol

[jimbo06]

The calipers look good mate, whats next for it then, painting the strut brace etc?

[Skorpion]

Looking good mate. I need to get my calipers painted. Oh well thats a job for tomorrow. Whats next?

[Hopcraft]

looks sweet, definally a good choice to do them gold

[Steve]

next up, paint upper strut brace, then fit the lower strut :homme:
bmc air filter i think, timing belt, tappets, sure i need new clutch soon, quickshift.
Facny some black 5 spoke speedline alloys 15"'s or 16's :clapping:

Hopefully will be employed by people who i am doing my apprenticship with, turn car into track car, get integra type r yellow :homme:

[Steve]

Few pictures from my mobile on my drive about last night :y:
shame i didnt have the proper digital camera with me they would have came out well :homme:
got my feet wet getting out aswel hehe

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/990a53c2.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/2b522d43.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/5853c37a.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/f2190a8b.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/b86f098f.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/91ae91a0.jpg

Nearly put the car back to standard look today but then bottled it, what we all think? leave it lowered standard vtr rims, standard rear lights and headlights? leave magnex on......

[k2thecsaxo]

leave it how it is buddy looks good, looks like a real good location for taking pics nice one, just remember to take welly boots next time

[BENSAX3]

jjeep the same

[Hopcraft]

why you wanna put it bck to standard, looks perfect as it is !

[Steve]

fitted lower strut brace today!
this is the how to.......

Tools

18mm Spanner
18mm Sockect and Racket
Angle Grinder

If you have a pit drive cover over it, if dont use axel stands jack the car up, get under.
Spanner on the nut, socket on the bolt (which is on the front side ;))
Loosen and take nut off do NOT take the bolt out.
The omp strut brace does fit on, once try and put the nut on you will see why i used an angle grinder, you cant fit a socket in (well i didnt have one that would fit in)
So i took the angle grinding and cut around the housing which the nut sits in, then hey presto i could now fit the spanner in.
Slide brace over bolts washers on then nuts on, tighten up :y: lol

Will get some pics, unfortunately non of the grinding lol

[Steve]

Quick pic of the lower strut
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/1945bfd5.jpg

it does make a difference, i really didnt think it would tbh. Since i put spax springs on the cars handling was way to soft and understeering!
Since put that on feels more solid and didnt seem to be understeering anymore!
And its not all in my head incase some one says that as took it down one of my allocated routes :homme: lol
only cleaned the car yesterday and its covered in flys again! :angry:

[Skorpion]

Very smart mate. Liking the pictures you took aswell. Nothing like that around by me! Just fly tipper's shite that ruins any locations!

I need to start getting some bits to improve the handling.

[k2thecsaxo]

smart mate, wouldnt mind one of these at some point

[Steve]

i cant recommend it enough, it does work..... Didnt feel a difference with the upper brace mind but sure it will be a combined effor between the two :y:

[Steve]

Very smart mate. Liking the pictures you took aswell. Nothing like that around by me! Just fly tipper's shite that ruins any locations!

I need to start getting some bits to improve the handling.

i need to get a decent camera aswel! nearly got one of those awesome looking fuji ones, the alright photos well the better ones in my thread are off some shitty camera for £60 from tesco quite good quality imo :y:

[jpsaxo]

Nice mate :)

[Harv]

looks really nice that mate. Loving the pics. Was the lower strut brace hard to fit or..?

[Steve]

looks really nice that mate. Loving the pics. Was the lower strut brace hard to fit or..?

fitted lower strut brace today!
this is the how to.......

Tools

18mm Spanner
18mm Sockect and Racket
Angle Grinder

If you have a pit drive over over it, if dont use axel stands jack the car up (high), get under.
Spanner on the nut, socket on the bolt (which is on the front side ;))
Loosen and take nut off do NOT take the bolt out.
The omp strut brace does fit on, once try and put the nut on you will see why i used an angle grinder, you cant fit a socket in (well i didnt have one that would fit in)
So i took the angle grinding and cut around the housing which the nut sits in, then hey presto i could now fit the spanner in.
Slide brace over bolts washers on then nuts on, tighten up :y: lol

Will get some pics, unfortunately non of the grinding lol


piece of piss if you could get a socket set onto the nut but there isnt room and the cups the nut sit in you cant get a spanner in, so i cut the outer side of the cups when it was off the car so i could then get a spanner in :y:

If that was already done then its a 5 min job, i couldnt loosen the nut and bolt when i had the car jacked up but lukily richie has a pit and loosened straight off :afro:

hope that sort of helps, deffo makes a difference i recommend to all :y:

i would try fitting it without cutting it if you can first! :P

[Saxy1]

car looking good mate :y:

[Steve]

cheers :y:

[saunders]

Looks good mate, although we need pics of the brace off the car for the full effect of what you had to do;)
As ill be getting an OMP upper and lower soon:A:

[Steve]

griffiths quickshift purchased today was hoping for it to be here sat but there saying can take 7 days to dispatch so fucked off at that, also the fucking leak is back, not as bad under neeth teh carpet its damp no big puddles like in the past :homme:

[Steve]

Looks good mate, although we need pics of the brace off the car for the full effect of what you had to do;)
As ill be getting an OMP upper and lower soon:A:

upper is piss, lower al take it off maybe or al draw a diagram, when you go to fit it you'll see what i mean about not being able to get a spanner in :homme:

[Steve]

Little Update

Upper strut brace is off :homme: had its first layer of grey primer on one side, need to flip it over and do the other.

Griffiths quickshift arrived yesterday when i was in scotland. Mam and dad headed up last night but i had to come home late last night before they arrived, got the call saying arh we brought your packadge with us, so annoyed at that might go collect it :homme:

Also took rear seats out for some weird reason :homme:

[Steve]

oh forget the photos from scotland yesterday, once again shitty mobile pics :homme: need to get my own digital camera :p

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/08f6290f.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/5ecb1366.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/c2ee2cfc.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/4e5dc924.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/8da49676.jpg

Unfortunately the air strip was locked for some reason, was some space around the musem but was cars parked up and dont think they would of approved of my drag racing lol! (it is allowed on the long airfield strip)

[Japman]

Great pics mate :)

[saunders]

Some nice pics there mate:y: Get pics up when you refit the strut brace.

[Steve]

Some nice pics there mate:y: Get pics up when you refit the strut brace.

will do, was going to do a how to for the fitting of the griffiths quickshift! cant really be assed to drive up just to get it though :homme:

[Steve]

also yesterday i bought 1ltr of super resin polish, high gloss protection and some glass polish :y: get them goodies used when the sun comes out hopefully next weekend :y:

[saunders]

will do, was going to do a how to for the fitting of the griffiths quickshift! cant really be assed to drive up just to get it though :homme:
Yea do a guide with as many pics as possible, as I may look at getting one of these

[Steve]

Yea do a guide with as many pics as possible, as I may look at getting one of these

will do, was going to do a guide on how i fitted my lower strut but cant be assed to take it back off :homme:

[jimbo06]

Good pics there mate!

[Saxy1]

excellent photo,s mate :y:

[Steve]

brace is now getting laquered!

[Wayne]

lovely photo's mate:y:

[T4JEE]

Smart pictures!

[Steve]

Strut brace is fitted, i fucking hate it! looked so much better red! it really stood out and looked the nuts imo

before..... :y:
http://i134.photobucket.com/albums/q84/Steve_vtr/6289ffe6.jpg

After..... :n:
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/a38dc880.jpg

Opinions? i think red was better but listened to other peoples opinions when we did a vote :( lol

Need to get a better quality photo of it yet though, just quickly fitted it in the rain!

[mallboy]

the car looks very nice, liking the engine bay and love the strut brace colour - thats what im looking to do with my strutbrace. keep up the good work:y:

[Steve]

cheers i preferred it red, think al paint my rocker cover gold? the same gold as my calipers :homme:

[thadogg]

looks quite nice in black IMO, but it definetely stands out more in red. Gold rocker cover will look good mate!

[Harv]

i preferred it in red mate! OMP strut braces look best in red as it stands out. Fair enough if its something to hide, but its something to show off. Red FTW!

[Steve]

i preferred it in red mate! OMP strut braces look best in red as it stands out. Fair enough if its something to hide, but its something to show off. Red FTW!

to be fair when do i drive around with the bonnet open? main reason for painting it was because the paint had flaked and was rusting :homme:

[Skorpion]

Looking good mate. Yeah it stood out more when it was red but goes better with the gold/black theme!!!

[k2thecsaxo]

looks alrite that mate but think i prefered the look of it more when it was red tho buddy, nice job tho:y:

[Steve]

:panic: cant blieve people saying it looks better red!

i hate you all haha :homme:

cheers for comments! waiting on mammy and daddy coming back from scotland wth quickshift, get that fitted today dam right!

Put my vtr alloys on ebay aswel!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMESE%3AIT&viewitem=&item=150133552094&rd=1&rd=1

[gibs-rallye]

i like it black subtle mate stick to the theme as red isnt what ur including gold and black all the way

[Steve]

i like it black subtle mate stick to the theme as red isnt what ur including gold and black all the way

not painting the lower strut mind lol :homme:

[gibs-rallye]

half a job *tut tut*

[jimbo06]

looks spot on dude!

[funkmaster-fresh]

its nice red, cuz it really stands out..
but id rather black myself, it goes with the colour scheme of the car.. and as another gold saxo owner.. id have painted it black too lol

[Steve]

we should meet up for a mass gold saxo meeting :homme:

[reddysaxo]

nice car mate, gold and black looks sweet

[Steve]

quickshift is fitted, shit loads of difference still feels a bit long from 3rd to 2nd but its really short going up the gears.
didnt do a how to as cant go wrong with their instructions. Only problem i came across was there is plastic casing containing wires which had to be re cable tied higher to stop the linkage hitting bar that its a good buy, same as b&m but with out the trouble of hitting heat shields etc

[reddysaxo]

them griffiths good then? would they fit on me 1.1?

[Banger_VTR]

so the griffins any good then steve?

[sim69er]

are these quickshift kits ok to use for everyday driving?

[Steve]

they are good, general driving al have to update you, wouldnt see why not 4th to 5th is a bit too short! Just takes some getting used to as am used to having the clutch down longer.

Piss to fit, and deffo just as good as a b&m i reccommend to all!

[Steve]

them griffiths good then? would they fit on me 1.1?

wouldnt see why not, that green filter mate the dude on ebay said no lol we came to a mutual agreement and i never had to pay for it! get a griffiths or what ever its called, i can sort the fitment for you ;)

[reddysaxo]

klkl nice one mate, np bout the filter thanks anyway

[Steve]

klkl nice one mate, np bout the filter thanks anyway

sorry i couldnt get it for you mate! but get a quickshift :y:
i was like grease lightening with the standard so once get used to the shortness jees louise al be so fast.........

[reddysaxo]

can you really feel the shortness? i hate current shift like seems to be so long and a sometimes take clutch off to early and end up grinding it:oops:

[Steve]

can you really feel the shortness? i hate current shift like seems to be so long and a sometimes take clutch off to early and end up grinding it:oops:

yes can 100% guarantee its shorter :y: get one seriously! al sort the fitting for you ;)

[reddysaxo]

payday on friday get a bonus too so ill be straight on the website and ordering :)

[Steve]

Dented my car yesterday!
Totally gutted, so went for a trip to the country and the roads were flooded, went halfway through to a drive patch, went to continue but was getting too deep and the current was really fast!
Took a pic when stopped halfway!

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/adeefaaa.jpg

This is from the other side!
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/ec6ef449.jpg

Random video of exhaust close up......
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/th_347ceee3.jpg (http://s134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/?action=view&current=347ceee3.flv)

Random video of driving through water, this is the shallow end after i did a 10 point turn to turn around lol
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/th_325dab61.jpg (http://s134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/?action=view&current=325dab61.flv)

And i had to drive through this puddle only way in and out, random but hey, you love it :y:
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/th_300f631f.jpg (http://s134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/?action=view&current=300f631f.flv)

And now for the dent :(
http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/f4089996.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/b11091b1.jpg

[Saxy1]

Nice photo's mate, its always gutting when you get a dent in your car, i hope you get it sorted nice car too :y:

[reddysaxo]

yeah hope ya get that dint out mate spot on car shame its got that now:n:

[mallboy]

nice pics mate, the car is looking nice - ashame about the floods, you should have just drove through it lol;)

[Steve]

nice pics mate, the car is looking nice - ashame about the floods, you should have just drove through it lol;)

would have but my dad sank a cavalier 2 years ago in one :homme:

[k2thecsaxo]

sucks about the dent dude apart fromm that cars looking great as per usual, some good pics and vids there matey :y:

[vtrjay]

nice car that mate,

[thadogg]

Unlucky on the dent mate, I've got one on my boot as well. Hate it as everytime I look at the car from the rear I see it!

[DavidKent]

How you manage the dent mate? lol odd place...
Don't suppose it matters now, but still a pain at the time!

[Luke]

Your car looks so good in the pictures, shame how it is now.

[Steve]

The end of my pride and joy.......
Was a thread in general chat but had it deleted it.

Would like to thank everyone for their help and support as people know how much of a rough time lately.

Bring on the debt though, VTS here i come ;) I will return!

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3206.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3207.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3208.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3209.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3210.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3211.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3212.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3213.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3214.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3215.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3216.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3217.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3218.jpg

There all the crash site photos and this is where the car landed.

http://i134.photobucket.com/albums/q84/Steve_vtr/th_video-0037.jpg (http://s134.photobucket.com/albums/q84/Steve_vtr/?action=view&current=video-0037.flv)

[Steve]

Now the damage to the car.

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3220.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3221.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3222.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3223.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3224.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3225.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3227.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3229.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3230.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3231.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3232.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/Progress%20Thread/DSCF3233.jpg

Miss it so much :( was my pride and joy.

Long story short i slid through a flood on a bend!

Rip my lovely saxo :(

[Wayne]

R.i.p was such a gorgeous saxo:( hope you find a replacment soon:y:

[Mikey]

lucky to be alive dude!!

shame was a nice car

[Predator_R32]

thats the spirit mate, look ahead and keep ya chin up :y:

did insurance pay out then??

[Steve]

thats the spirit mate, look ahead and keep ya chin up :y:

did insurance pay out then??

got forms to fill out and then they will......

Going to look at a vts on saturday :homme:

[Predator_R32]

good man dont look back on it improve :p

[BenSilverSaxo]

TBH mate i think your better off, it had a dint in at the end of the day lol. Was a great car wish it could have been around longer because it was really startin to take shape!!

[Steve]

TBH mate i think your better off, it had a dint in at the end of the day lol. Was a great car wish it could have been around longer because it was really startin to take shape!!

glad i didnt get that dent fixed now ahah....... vival le vts here i come :hug:

[jimbo06]

shame about the vtr mate, but its paving the way for a vts. keep us updated on the vts viewings mate.

[mallboy]

the saxo is fooked, at least your ok. it was a nice car but hope you find something good:y:

[dsh85]

look forward to seeing the new car! just be careful with that extra power! after the results of this one

[Steve]

look forward to seeing the new car! just be careful with that extra power! after the results of this one

was nothing to do with power at 60 :homme: be driving safe and sound as will have a major debt lol

[Mystic]

Bad luck mate, the weather conditions have been pretty bad lately too, ur so lucky to get out of that although its like i said about my crash (exactly 1 year ago this sunday!) If your gonna crash, you might aswell CRASH :A:

It was dented anyway :homme: it needed throwing out!

Good luck with the S hunt, what kinda insurance did you have?

[baker556]

unlucky to hear about that mate looks real bad can you get any of the parts off if it i would be willing to buy some parts eg front lights !

good luck on looking for a VTS and lucky ure alove mate did ure airbag come out?? did u have any bruses of anything?

baker

[Steve]

Bad luck mate, the weather conditions have been pretty bad lately too, ur so lucky to get out of that although its like i said about my crash (exactly 1 year ago this sunday!) If your gonna crash, you might aswell CRASH :A:

It was dented anyway :homme: it needed throwing out!

Good luck with the S hunt, what kinda insurance did you have?

just sent insurance forms off and decalred SORN.
Had fully comp with 1k excess.

VTS will be 1.5k tpft 0 excess :homme:

going to be in debt though to get another car so mayswel have a decent car with bigger debt :panic:

[Steve]

unlucky to hear about that mate looks real bad can you get any of the parts off if it i would be willing to buy some parts eg front lights !

good luck on looking for a VTS and lucky ure alove mate did ure airbag come out?? did u have any bruses of anything?

baker


had a few little cuts but back and neck are still fucked :homme:

[Steve]

The begining is upon us already!

http://i134.photobucket.com/albums/q84/Steve_vtr/The%20VTS/202728-1.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/The%20VTS/202728-2.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/The%20VTS/202728-3.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/The%20VTS/202728-4.jpg

http://i134.photobucket.com/albums/q84/Steve_vtr/The%20VTS/202728-5.jpg

[Predator_R32]

looks immaculate and very low mileage :y:

whats the price then

[Steve]

looks immaculate and very low mileage :y:

whats the price then

wouldnt like to say :homme: got a swore ring from the bank though :y:

[MickMc]

Yes looks immaculate :y:

[DavidKent]

haha looks nice mate!
Whats the guage on the right hand side for?
Most Sax's don't have them!
What year is it then? private plate included?
Looks nice mate, low miler too!

[Baz]

gauge on the right is oil temp. Looks good matey :)

[DavidKent]

I knew that, was just testing ;)

[Steve]

gauge on the right is oil temp. Looks good matey :)

cheers, cant wait to get it :panic:

[Predator_R32]

wouldnt like to say :homme: got a swore ring from the bank though :y:

oooo so it was expensive then?? id say you paid about 3500 for it

[Steve]

oooo so it was expensive then?? id say you paid about 3500 for it

wel my ass is still swore :afro:

[k2thecsaxo]

looks wicked buddy bet you cant wait, best colour n all

[xclairex]

thats Davids car isnt it? its nice, the reg will suit you 'Miss Bitch' :homme:

[Steve]

thats Davids car isnt it? its nice, the reg will suit you 'Miss Bitch' :homme:

was davids car :homme:

[mitchell_saxo]

alreet m8 just joined th day seen th pics ov all th saxos was wondering wen th nxt meet is on?

[Steve]

alreet m8 just joined th day seen th pics ov all th saxos was wondering wen th nxt meet is on?

alright bud where in the NE you from? check out the NE section and apply to be a member all the details are posted up in there :y:
They are going out for a drink i think this week, not sure on the next saxo gathering :homme:

Wish you hadnt :bump:ed this thread miss my gold saxo :(

[VTR_Superstar]

I'd have gone back with a hammer and absolutely anhilated his jeep fucking cock!! Who pushes a wing... fucking Gypsy!!

[Steve]

I'd have gone back with a hammer and absolutely anhilated his jeep fucking cock!! Who pushes a wing... fucking Gypsy!!

lmao miss my old car :(

[Furio_Steve]

sorry to see the vtr go, was a well nice mate
make sure you get the vts up when ya get it :)

[Steve]

you cracking jokes?
go back into photo section and a few threads down :P

[Furio_Steve]

have you actually got it yet???

[Steve]

have you actually got it yet???

had it over a year why neg rep me?

[Furio_Steve]

i didnt neg rep ya lol????

[Steve]

i didnt neg rep ya lol????

i got neg rep (which has been cancelled out) saying wtf lol

[VTEC-Saxo]

aquaplaning at 60 round a bend not gud :/

[Steve]

aquaplaning at 60 round a bend not gud :/

ah you bumped it.

Miss this car soooo much :(

[blondie2008]

i like your car :) the gold is a nice colour like x

[Steve]

i like your car :) the gold is a nice colour like x

now a write off hence why i pose in the VTS :p x