help me please!!!

[danl_vtr]

i have put a vts single plug engine in my single plug vtr with a unlocked ecu by bluehawk and gone to start car now after conversion and immobiliser light is flashing!

how do i fix this??

do i have to remove all the immobiliser stuff from my car?
black box, chip in key, black transponder box or just 1 to break the circuit?

any help is GREATLY appreciated!

[Japman]

You dont mate it will flash,just stick some black tape over it

i had mine done

[danl_vtr]

black tape over what?

the car wont start but turns over and the immob light just keeps flashing?

[danl_vtr]

in a rush and forgot to put the'it wont start bit in' !!! what a div...:n:

[Japman]

Sorry mate i thought u ment the light was just flashing

i ment put black tape over the annoying orange light lol

Strange how its not starting

[Japman]

Mine started straight away :S

[danl_vtr]

tell me about it

all the vtr immob stuff is still on car and im thinking that iver just locked the ecu again

[Japman]

Im not too sure how that works,Im sure somone will be able to help you shortly mate

[danl_vtr]

cheers anyway fella.

[gixxa]

when you fit the ecu it codes its self back to the imob in the car

[williamsvts]

your ecu is locked maet. have you got teh immob and keys from otehr car? if not them your ecu will be locked again. you need to remove your cars original immob before using your new ecu and you can not fit your immob back to to the car. as this will lock your ecu.

[kenny]

get the details of the donor car and go to citreon and get the transponder number and get it coded to the key and should start no problems.