Log in

View Full Version : galatic engine


Gregstar
21st June 2004, 22:25
i am having a few problems with my 93K mile black top VTR, the tappets are noisy, and there is just a general lack of power as a 1.4 beat me off the light and i couldn`t catch it. the only mods are magnex backbox and green cotton induction kit. it has been serviced regularly with oil changed every 4k miles as service is every 8k. Any ideas

citrovts
21st June 2004, 23:07
how big are your wheels smileys/smiley2.gif

Gregstar
23rd June 2004, 02:37
they are std alloys, from shitroen. i used to have 16`s but apparently that kept causing my fuel lines to pop off from the pump so i put the std ones back on

Scott
23rd June 2004, 03:08
try giving the engine a flush and buy a haynes manual, tells you how to set the tappets in theresmileys/happy.gif

Gregstar
23rd June 2004, 23:01
i have done less than 1k on a new head and full service which is the worring thing

Scott
24th June 2004, 04:10
was the head new or a recon? if it was a recon maybe get it checked wouldnt be the first time i had heard of heads being said to be fine and have a whacking great crack in it, though that would be a bit more noticablesmileys/smiley17.gif

How are the running temeratures etc?

Gregstar
25th June 2004, 02:59
running temp is fine stays on half mark when driving and only rises when in traffic. i have noticed that it is starting to stream a bit, not sure what that would indicate?

Scott
25th June 2004, 15:19
how do you mean "stream" or did you mean steam? if its steam then get it checked! sounds like the head gasket is dead or the head itself is leaking

Gregstar
26th June 2004, 03:19
sorry i did mean steam silly typo. the car is now having the head gasket replaced again, along with piston rings!! just hope the bill isn1t too much

Scott
28th June 2004, 04:13
the rings will probably be a bit labour heavy smileys/smiley5.gif