Fitting a pipercross VIPER....

[silver_saxo]

Right bought this of ebay....

was told it would fit my 1998 mk1 black top but the hoses etc dont look like they match up,

Anyone else had this problem?

This is what my kit looks like:

http://i20.ebayimg.com/02/i/000/8d/9a/dd7e_1.JPG

Doesnt look like it will match up to the standard system.





.

[babers]

is that for a vtr or vts looks the same as my mates vts one,

[saxoash]

is that for a vtr or vts looks the same as my mates vts one,

No difference.

The hose is universal

[Mystic]

Its for a VTS, to fit it to the VTR you wll need to find a pipe to fit betwwen your throttle body and the filter pipe so that it will clear the engine. Shouldnt be too hard to do.

If you patient Leckie has bought a VTS kit for his VTR so you can ask him what hes using to make it fit...

[silver_saxo]

but there are 3 pipes going to my standard filter but only one on the VIPER?

[craig180]

Did it come with hoses or are you going to use the originals?

[silver_saxo]

All it came with is whats in the picture! (hoses for what by the way?!)

[babers]

No difference.

on pipers web site there are 3 different ones for the vtr

[craig180]

All it came with is whats in the picture! (hoses for what by the way?!)

Sorry, the pipes between the throttle body and the main part of the kit and the pipe from the oil brether to the kit

[silver_saxo]

Sorry, the pipes between the throttle body and the main part of the kit and the pipe from the oil brether to the kit

Original i guess, there is only one space for a pipe on the viper though, not three like ther needs to be! Also there is no place for the temp sensor!

Begining to think i bought the wrong one! Bollocks!

[silver_saxo]

Tis is what it should look like...

http://www.pipercross.net/images/kitimages/PK083B2.jpg