How do you fit raceland!

[Strikevts]

Hey guys could some1 tell me how to fit these raceland inclosuer induction kits, as the box wont fit cuz of the power steering cap??

For a mk1 vts

[VTS_16v_Boy]

I have a green but Im sure its just a case of moving the power steering bottle to the left either by bending the metal bracket out of the way or which might be better knocking up a little plate which allows the bottle to be moved further over kinda like a spacer.

[KamRacing]

you have to move the power steering bottle.

[SteVTR]

i took the bracket off hammered it flat then attached it to one of the bolts that fix the raceland box together

[Strikevts]

Ah right ok will do that later then ( bro has the tools ) also need to cut the rubber tubeing to the trottle body as its to long :/ i got it on without the air box and it goes so much better then the pipercross.

[Strikevts]

Just read on here that the plasic pipe thats for the breather pipe brakes??

Am i better blocking that off, if so i have another problem as the breather pipe from the top of the block is stuck on...

O what a day for playing with car's huh :(

[Japman]

ive just had mine and i have the same prblem,if i move the pas cap over to right and re-drill hols for it ,is it ok to use any piping to connect it back up

[SteVTR]

Just read on here that the plasic pipe thats for the breather pipe brakes??

Am i better blocking that off, if so i have another problem as the breather pipe from the top of the block is stuck on...

O what a day for playing with car's huh :(

mine started to wear out where it goes into the metal pipe for the raceland so it sealed it in with some black silicone and it never gave me any trouble

[Japman]

ive just had mine and i have the same prblem,if i move the pas cap over to right and re-drill hols for it ,is it ok to use any piping to connect it back up


bump........