New Clutch Advice

[Saint]

Anyone here know if there is a tried an tested uprated clutch around for the VTR? (2002 Silver Top)

Thrust bearing is being a nosy son of a Bi**h! so looking to get it replaced and new clutch while im at it .

Not looking for full on group n rally stuff, somet simple but tad uprated. spotted the black diamond gear which isnt too exspensive so tempted :) if funds stretch may get a B&M short shift while im at it

[saxodan]

Anyone here know if there is a tried an tested uprated clutch around for the VTR? (2002 Silver Top)

Thrust bearing is being a nosy son of a Bi**h! so looking to get it replaced and new clutch while im at it .

Not looking for full on group n rally stuff, somet simple but tad uprated. spotted the black diamond gear which isnt too exspensive so tempted :) if funds stretch may get a B&M short shift while im at it

My release bearing squeeks like a mofo, how od I sort it out without paying for a new clutch?

[hesslevtr]

dont waste your money on a blackdiamond or any make like that there just reconditioned ones and wont last

get an LUK or VALEO

[CampDavid]

Valeo/LUK is fine. If the release bearing queeks you can just replace that, though its still a ballache so may as well do the whole lot

[saxodan]

Valeo/LUK is fine. If the release bearing queeks you can just replace that, though its still a ballache so may as well do the whole lot

How much is a clutch release bearing to fix?

How many hours labour?

How much for the relase bearing?

[Saint]

Valeo/LUK is fine. If the release bearing queeks you can just replace that, though its still a ballache so may as well do the whole lot

Yeah basically im going down the route of "while its out" replacement ;) lot of labour to get just the bearing changed so might as well uprate it a tad

so reckon just stick to standard valeo one?

[hesslevtr]

about 20 for the release bearing the box needs to come out will probley cost you an extra £50 to replace clutch so might aswell get the clutch done

[Saint]

How much is a clutch release bearing to fix?

How many hours labour?

How much for the relase bearing?


fair few hours labour cause they gotta pull the clutch out, and then refit

god knows how much the bearing costs mind

[saxodan]

about 20 for the release bearing the box needs to come out will probley cost you an extra £50 to replace clutch so might aswell get the clutch done

Soryr to be a pain but can you break it down?

So one release bearing and fitting = £70? ( £20 parts and £50 labour?)

How much is a clutch and how much is labour on that?

[hesslevtr]

valeo or LUK will be fine both top clutch kits

[hesslevtr]

box out will be around 100+

bearing around 20ish

cluthch kit what includes bearing around 70 odd

[saxodan]

box out will be around 100+

bearing around 20ish

cluthch kit what includes bearing around 70 odd

Right so £70 for a whole new clutch kit..

And fititng on that would be around..??

How long will a squeeky bearing last for??

Cheers hessle

[hesslevtr]

i have no idea of how long it will it last for how longs a piece of string

a new clutch in a saxo will be around 150+ thats fitting and everything

[Saint]

just found a LUK one - https://sslrelay.com/buypartsby.co.uk/clutch_kit_details.php?recordID=1031

nice price tbh.

so no decent ish performance ones?

[saxodan]

i have no idea of how long it will it last for how longs a piece of string

a new clutch in a saxo will be around 150+ thats fitting and everything

twice the length from the middle to the end ;)

Only joking

Cheers Hessle, rep for you young man

[Saint]

Right so £70 for a whole new clutch kit..

And fititng on that would be around..??

How long will a squeeky bearing last for??

Cheers hessle

squeaky bearing will stay squeaky, tbh mines gotten worse where it squeaks non stop now :(

fitting be same as removal price probably.

[hesslevtr]

if the bearing is squeeking and ratteling id get it replaced asap as if not you run the risk of the bearing splitting and sending ball bearings everywere in the gearbox and could damage the gearbox which will cost more money to repair

[Ryan]

standard valeo clutches are more than up to the job.

[saxodan]

squeaky bearing will stay squeaky, tbh mines gotten worse where it squeaks non stop now :(

fitting be same as removal price probably.

Well the thing is I leave for uni in sep so will be selling that car, IM just wonderding if it will affect that car or damage it??

Cant justify £150 tbh when im leaving soon

[hesslevtr]

Well the thing is I leave for uni in sep so will be selling that car, IM just wonderding if it will affect that car or damage it??

Cant justify £150 tbh when im leaving soon

get a cheap 1 then or just replace the bearing if not keeping it

[saxodan]

get a cheap 1 then or just replace the bearing if not keeping it

but as you said, fitting on the bearing is expensive as fook

appart from the car is sound and will sell no probs with 12 months mot slapped on

[hesslevtr]

but as you said, fitting on the bearing is expensive as fook

appart from the car is sound and will sell no probs with 12 months mot slapped on

well thats upto you what you do with it but if you leave it you run the risk of it going and causing more damage and costing more money

+ if the person knows what there looking for they might not buy the car cause of the noise

[Saint]

if the bearing is squeeking and ratteling id get it replaced asap as if not you run the risk of the bearing splitting and sending ball bearings everywere in the gearbox and could damage the gearbox which will cost more money to repair

meh! time to get it done asap then cheers for the help mate will probably get it ordered for end the month to get done then. trying to finish modding the car for the show season while servicing is a bitch ;)

:y: