Lambda Sensor (mani) Question, post #7

[dannyjay]

Rocker cover and mani heatshield.

How do I remove them safely?

The sensor (is it that?) thing thats going into the shield, is rustered and I can't get it off?

http://i36.photobucket.com/albums/e15/digitalsuperstar/My_Car/30-05-2007/30-05-20074.jpg

Any ideas?

Thanks.

[doubledavies]

lots of WD-40 and pateince mate

dont damage it


rocker cover comes off by undoing the two bolts (may need to remove coilpack too)

just ensure that the gaskets comes away too and when you put it back on make sure the mating surfaces are clean and the correct torque it used

[Baz]

manifold is easy, the sensor, undo the clip (green one) wiggle it the red bit pulls to the right whilt pulling the green bits apart or something like that.

rocker is just basically taking to bolts off and pulling it off, just watch out for 2 metal parts that the screws go through going into the engine where the oil is. Getting it back on is abit of a fiddle

[riggsy]

A said very easy ^^

Just take your time or you WILL brake something!

[Ryan]

if bolts never come undone for other part, penetrating oil is your friend, its a cars love juice

[Tobs]

DONT TRY REMOVE THE LAMBDA PROBE

sorry caps

just undo the green clip like they said and a bit of riggerling to get it off

[dannyjay]

Ok, I havn't all is fine, as I painted the shield on the car, and did the rocker cover off of the car!

Now my question now is I think I got abit of hammerite on the Lambda probe, and when the car runs for 5 mins it starts smoking?? Is this a bad thing, or will it just burn the paint off soon and be done??

Thanks

[Ryan]

why didnt you cover the probe numpty?? lol!

id get it removed, you have to be careful what to use as you dont want to use anything that could cause fire

[doubledavies]

i got oil on mine and it burned off

[Ryan]

i got oil on mine and it burned off

oil is not hammerite :P

[dannyjay]

why didnt you cover the probe numpty?? lol!

id get it removed, you have to be careful what to use as you dont want to use anything that could cause fire

I didn't have to, I'm like a sex machine when I get a brush (Not a bush) in my hand! But I must have caught it and not known!

Whats the best thing to get it off with?

PS (I think some dripped onto the manifold too... bad thing I'm guessing?)

[Ryan]

trying to think what to use, white spirit i use to clean hammerite ff stuff but it would then need to be cleaned off as i wouldnt want to cause a fire risk... ummm

could attack the manifold with some wire wool gently if its not a nice one?

[dannyjay]

It isn't but I can't get to it!

Poo sticks, think I'm going to have to lick it or something...

[BENSAX3]

mmmmmmmmmm hamerite my favourite

[Ryan]

mmmmmmmmmm hamerite my favourite

you will love my roll cage then ;)

[Tobs]

isnt hamerite flamable? i swear i have seen it on the back op the tin before