Log in

View Full Version : induction kit


Craig
10th September 2004, 02:12
/members/CRaig17Furio/My_engine.JPG

i want to run my filter on hoses or pipe down to the front of my engine behind the radiator does anyone kno if i can by the pipe or hoses to do it???

thanks
craig

sdtowers
10th September 2004, 03:39
not on a saxo mate, ur best bet is to either buy some ducting as the original airbox ducting is cleverly positioned above the radiator (hotter air less bhp) or by a forced induction kit which will give u more impressive power gains.

Smithy
10th September 2004, 19:13
Think you should be able to buy some samco hoses. Then you could reposition it further forward where your ducting hose is now.

Deano1983
10th September 2004, 19:55
Yes as smithy says it can be done if u buy sum samco hoses with abit of moddin here and there which will help alittle as it wont be as near to the red hot engine but still a green enclosed or BMC wud be better!!

Also i dont think the filter u have is the correct one as ur breather pipe is not connected to anything, altho dont think it really matters!!

sdtowers - dint understand wot u ment, as if u ment it will lose BHP because its near the radiator then u r sort of rite but it wud still be in a better position than it is currently!!

Deano smileys/smiley17.gif

Craig
10th September 2004, 20:02
should i buy an oil breather filter?

Craig
11th September 2004, 02:44
has anyone else on sax-p done managed to do this if so im struggling on wat hoses to buy for it and where to buy them help?!? lol

smileys/smiley5.gif