Log in

View Full Version : VTR


mattchewone
8th July 2007, 20:16
What would you get on a mk2 VTR with a Fourbranch manifold with sports cat in the manifold, and a straight through pipe with an inclosed air filter? Not sure whether its the 90bhp or 98bhp version?? Could you give rough quotes on both. Just got a mate with the mods and i was wondering what he will be getting from it. I think he has put it on rollers and said it is at about 115/120bhp.

Ryan
8th July 2007, 20:18
piece of string. how long is it???

there is also a guide up the tip of this section on what vtr engine you will have

mattchewone
8th July 2007, 20:22
yer i just read im guessing its the 98 version as the cat is in the manifold. As for how long a piece of string is = Twice as long from the middle to the end ;) .

Steve
8th July 2007, 21:16
i honestly would say around 107bhp going off what other people have but cant really say

SaxoJamie
8th July 2007, 21:26
Ifi it's an MK2 VTR it probably pushes out 98 BHP (without any mods). With a complete exhaust and induction system you could get at least 106 BHP.:p

VTR-Chris-VTR
8th July 2007, 22:00
Yep it will give you around 106-108BHP with that 4-1 Manifold with sports cat, plus full exhaust system........sum1 on ere got this done and also had it put on a rolling road pushed out something like 107bhp with 119ft-lb of torque......quite impressive

Saxo_Steve
8th July 2007, 22:51
Don't mean to hijack but if it was a 4-2-1 manifold without a cat any idea how much bhp would be gained roughly?

jimbo06
9th July 2007, 10:58
with a miltek manifold encorporating a sports cat, full magnex system and a bmc induction kit my 2001 vtr made 107bhp and 119lb

James
9th July 2007, 12:15
gmc/magnex/bmc - got me 109bhp.

Depends on a couple of things..

A) What bhp your car left factory with, they may well say it left with 98bhp but they only checked 1 in every hundred/1000 (cant remember what) to see if there running the same.
B) The quality of the items your putting on..

vtr_jay
9th July 2007, 17:14
i had my mk1 vtr with cams, 4-2-1, magnex full system with decat and K&N panel filter running 115.52 bhp and 104.3lb (low torque but cams were not mapped)

VTR-Chris-VTR
9th July 2007, 20:22
Thats alot of power but not alot of torque so was the performcance like? i doubt it will be as good as these MK2 ones with 107bhp & 119 ftlb torque will it?

VTR-98
9th July 2007, 20:29
yer i just read im guessing its the 98 version as the cat is in the manifold. As for how long a piece of string is = Twice as long from the middle to the end ;) .

The cat isnt in the mainfold on the 98 version mate.

Ryan
9th July 2007, 20:31
The cat isnt in the mainfold on the 98 version mate.

yes it is.

jimbo06
9th July 2007, 20:37
The cat isnt in the mainfold on the 98 version mate.

:wall: :wall: