Help me please ! induction kit

[DawsonWicked]

i have a 1998 1.1 saxo n i want to get one of them universal induction kits or any indcution kit for about £20 i dont wanna go over the top becus i dont but i want it to make all the right noises. sooo dus anyody have a picture or any instruction on how to fit one to a 1.1spi and know where i can get one cheers fellas :y:

[l1ukeRS]

wack it stragiht on the end of the throttle body mate

[Mozza]

my opinion would be dont go for a universal induction kit mate. My cars just failed its MOT on the Emmissions and they think one of the reasons is because i had a universal induction kit on the end of the throttle body and it was taking in way too much air, more than its supposed to. It doesnt make any difference as far as how your car runs tbh, just if u do get one make sure u take it off and use the standard one when it comes round to its MOT.

[DawsonWicked]

tar guys this might sound daft but i dnt know anything bout engines i just want the basics lol. soo would i need a cold air feed running to the induction kit and a breather and just get rid of the airflow meter then mate and what would i doo with the pipe running from the manifold tar mate

[KamRacing]

If you sorted us out with postage we could send you a few Raceland cone filters . Stick that on the end of some universal hose and you'd have a cost effective open filter. Just make sure it has a good air supply as it wouldn't be the best for performance

[Ry_B]

I had a universal open cone on my corsa when i put it in for its MOT and it went straight through

[DawsonWicked]

yea sure mate how much u thinking. i was going to stich some hose on the throttle body then tie it down to the engine some how and then i would have got a cold air feed from somwhere to lead directly to the cone is that ok.

[TU-Tuning]

http://i58.photobucket.com/albums/g279/99Westcoast/P5060010-1.jpg

Take out the box circled in red, fit the kit where the blue arrow is, and leave the curvy piping you can see near the slam panel at the front of the engine bay in place to get cold air to the cone mate

[DawsonWicked]

thanks allot mate but i have a spi and thats the old poo poo engine lol. and it all looks orkward as ownt sooo i have no idea how to doo it. and will it effect the engine temp or the way it runs in i take off the airflow box thing that links to the mani fold and the breather pipe becuase i wanna stick a breather right onto the engine is that ok to do

saxo 1.1spi 1998

[DawsonWicked]

check the engine on this saxo in the link thats the same as mine.

http://cgi.ebay.co.uk/1997-CITROEN-SAXO-X-WHITE_W0QQitemZ330148171450QQihZ014QQcategoryZ1817 4QQrdZ1QQcmdZViewItem

hopefully that gives yas a good enuf idea tar

[DawsonWicked]

anybody got ideas thanks

[Mozza]

http://i58.photobucket.com/albums/g279/99Westcoast/P5060010-1.jpg

Take out the box circled in red, fit the kit where the blue arrow is, and leave the curvy piping you can see near the slam panel at the front of the engine bay in place to get cold air to the cone mate

what about the other smaller pipe which is attached to the box? doesnt that need to be in place on something?

[TU-Tuning]

You either;

- Feed it back into the induction tubing through a hole
- Buy a 'breather filter' which is like a very small K&N from a motor factors, halfrauds etc
- Get an Oil Catch Tank, search ebay and threads on here if you dont know what they are

[DawsonWicked]

thanks guys for ya help appriciated

[matthewslee]

You either;

- Feed it back into the induction tubing through a hole
- Buy a 'breather filter' which is like a very small K&N from a motor factors, halfrauds etc
- Get an Oil Catch Tank, search ebay and threads on here if you dont know what they are

dont get an oil catch tank as some people will fail you on an mot 4 them i know my pug failed 4 this

[Predator_R32]

why would it fail on that mate, did they explain??

[matthewslee]

nope told me it had to be changed so put a green filter breather on and they past it cost me no extra

[Predator_R32]

he ust be really picky then mate, i dont think its an mot requirement

[matthewslee]

nor did i mate

[Predator_R32]

take it to a different tester, he must be very picky or shit :p

[DawsonWicked]

thanks lads ill get an indcution kit n bang it on tha throttle body and lead a cold air feed to it ill also attach a breather that ok then tar

[nazz1]

Not for under £20 but...

the ripspeed 1 in halfords, which is like a copy of the BMC CDA

Talking to a guy the other night he said it was sorted!