Technical forum MODERATOR(s) wanted

[Simo]

To further improve the information available to all within Saxperience technical-related forums, I would like to appoint a number of forum moderators.

If you feel you have the motivation, passion and drive to fill this position, please get in touch. :A:

If, as a contributor/reader, you would like to suggest someone who you would like to fill this role, please make your suggestions in this thread.

Thanks,
Simo

[Karl]

If it's to do with Problems with Saxo's / Engine and performance,
perhaps someone like itsafastworld..

he seems to speak the truth tbh

[ad_182_uk]

yer and then probably predator for interior exterior mods and general modding

[MaRiO89]

Yeah i agree with Soulless..Ryan knows his stuff tbh..

I wouldnt mind doing it aswell..:P I'm on here 24/7 and have good knowledge on saxo's and have done quite abit of work to mine so have experience etc..:)

[tommyc]

i would be more than happy to help. im a quilified NVQ 3 motor technician and have worked on more saxo than i wish to remember. I have untold knowledge of saxos

[saunders]

Yea Ryan seems to know his stuff, although he can be quite blunt sometimes he seems a nice enough bloke

[Karl]

Yea Ryan seems to know his stuff, although he can be quite blunt sometimes he seems a nice enough bloke

it's what you need, plus it makes me laugh sometimes.

On the topic of moderators, who is SE's moderator?

[MaRiO89]

He's a sound bloke if you just take the blunt/sarcy comments as a laugh..Actually brightens the forum up abit tbh..

[saunders]

it's what you need, plus it makes me laugh sometimes.

On the topic of moderators, who is SE's moderator?

You have my vote for moderator mate

Although I think I should get SE's Whore

[Scattle]

Yup, ryan should be engine/performance moderator.

[Karl]

You have my vote for moderator mate

Although I think I should get SE's Whore

lol...
I know it's a little offtopic but since Starkie changed to a Corsa VXR..I dont think we have one?

[saunders]

Soullous for Moderator!!! :d

[bullit]

i would also like to put myself forward, if theres ever a vacancy in the joke section

[Yates]

Ryan knows nothing about engines he always texts me and asks me

theres a few who know there stuff so should be more than one i think

ryan, bullit, williams, campdavid all know there stuff, cant think of anyone else off the top of my head at the mo

[leeroybrown]

Williams defo for me and maybe me ;)

[Steve]

i agree with the above for their knowledge but it also helps if its someone who spends alot of time on here, knows the rules and whats utter crap to be removed.

[Yates]

leeroy does know his stuff but hes a cunt and spams

[leeroybrown]

cheers matt

[SNewham]

I don't really think it needs to be someone who is a guru on the subject just someone who can keep the forums in order, prevent arguments etc, is trustworthy and online regularly..

[Yates]

think its better if someone who knew there business was a mod tbh it makes complete sense

[Steve]

think its better if someone who knew there business was a mod tbh it makes complete sense

i think a bit of both tbh doesnt have to be a guru just not a total novice :oops:

[furioAL]

I'd happily offer my services... :oops:

Alex
:)

[Yates]

Il be honest, Ryan told me it would be the highlight of his career, hes always wanted to be some kind of mod on the internet, Olympics come and go, but a mod on the internet, thats where its at he told me.

[djmartin]

persnally i think simo you should make a test paper/email and get people to answer the relevant questions then people can put there money where there mouth is ;).

i can easily say look i have a dam degree in saxo's engines (total rubbish like lol) but its all about getting the right person for the right job and i think putting a proper test on will solve the problem.

people who are serious about wanting the position would open there arms to do a test to show what they know about the car.

[Predator_R32]

ill be up for the job simo :y:

think hesslevtr is too

[dsh85]

for me its gotta be someone who stands out and is known for

1 - answering these general question
2 - is well known on this site and trusted

[Ryan]

*waves* as discussed with scott a while back simo.

im more than willing to put input into moderating technical side of things, as i am trying to put alot of work into the technical side of forum.

[Ryan]

and matt stop spamming ffs! i think this is actually a useful thread for a change not for you to spam!

[James]

I don't like ryan... he is gay without power.

Hesslevtr and pred ftw.

[S34MER]

My money's with Ryan, he is :homme: but lets not hold that against him. Lets face it he knows what he's talking about, i've sent him numerous pm's in the past to ask questions, and if i ever had a problem with anything and i was unsure about something, the first name that creeps into my head is Ryan aka Itsafastworld85!

so im going with Ry FTW!

RY, You can make cheques payable to O.Seamer, thanks ;)

[craigy_87]

i gotta agree with most people here ryan hessle and pred come to mind straight away an there are a few others of course.

which reminds me i aint seen hessle post in a wee while where is he??

[DAN-VTS]

lol...
I know it's a little offtopic but since Starkie changed to a Corsa VXR..I dont think we have one?

I have starkies saxo so it would make sense ;)

I wouldnt mind helping out being a mod, though would be better in the problem/queries section, as i work on citroens all day long and know their common faults etc :y:

[Ryan]

My money's with Ryan, he is :homme: but lets not hold that against him. Lets face it he knows what he's talking about, i've sent him numerous pm's in the past to ask questions, and if i ever had a problem with anything and i was unsure about something, the first name that creeps into my head is Ryan aka Itsafastworld85!

so im going with Ry FTW!

RY, You can make cheques payable to O.Seamer, thanks ;)

HAha using my cheque line - after the various pms i helped you via ;)

[BenSilverSaxo]

Itsafastworld knows his stuff so i think that he would be perfect for the role, however i have seen that AXracing has some very good knowledge especially when it comes to turbos etc. He hasnt been on the site that long though.

Itsafastworld FTW

[Ryan]

Itsafastworld knows his stuff so i think that he would be perfect for the role, however i have seen that AXracing has some very good knowledge especially when it comes to turbos etc. He hasnt been on the site that long though.

Itsafastworld FTW

AX racing is well respected on many forums, as said he has only just started really using saxP.

he has alot of great knowlege and its good that he is sharing it on here now tbh.

8v engines and turbos ive read alot of his posts.

[leeroybrown]

I dont like Ryans replys...tbh

Comes across very arsey

Might not be in person... but what he replys makes me think otherwise

[djmartin]

I dont like Ryans replys...tbh

Comes across very arsey

Might not be in person... but what he replys makes me think otherwise

what would you rather have someone coming across a lil arssy but knows what there on about or someone totally awesome but know F**k all about a car LOL.

I rest my case.

you have to take things with a pintch of salt sometimes with certain members on here its an easy thing if you cant do that then its you with the problem.

as i always say to ppl.

Im glad someone talks about me behind my back cos i dont think F**k all about them lol. (there isa moral to that sentance but il leave you all to figure it out for yourselfs)

[leeroybrown]

Yep and there is doing so you dont look a complete arse or come across as look at me i think i know everything

Selective words are needed

[Ryan]

Yep and there is doing so you dont look a complete arse or come across as look at me i think i know everything

Selective words are needed

'i wouldnt tell a blind child he would see the world'

i take the piss as does everyone else on here. I give out adivce and help where i can.

banter is needed at times to make people have a giggle from time to time.

[leeroybrown]

No problem there at all

I may have just taken you the wrong way, but thats my opinion

[Ryan]

No problem there at all

I may have just taken you the wrong way, but thats my opinion

I dont mind people having opinions and your very much intitled to it dude, its what life is all about. it would be one very boring place if everyone was a 'yes sir' rather than being a bit contraversial/disagreed.

[Dan-Subtle]

ryans my recommendation, he knows his stuff.

good bloke too.

[leeroybrown]

i'll watch this space then tbh

[bullit]

as said really. ryan for me. and the end of the day he helps people no matter what. if it wasnt for him in here then the engine section wouldnt be what it is imo. same goes for pred and hessle, all of whom have put countless hours in to helping people for the good of the site. which basically what its all about

[Ryan]

id like to also point out adsayer - inbetween spamming the fuck out of everything has some very relevant information on suspension geometry etc...

irc its his masters project. so theres a whole load of information to be gained from all users of this site.

aswell as more physics related stuff on gas speeds etc..

so another consideration imo.

[CWD]

i'll voluntere myself. I've been here a few years now, and i have great presence felt all over the forum, its just not the same when im not logged on.


:A:

[CWD]

on a serious note - a mod doesnt have to be picked on "saxo knowledge" surely? isnt it about maintaining the smooth day to day running of the site, being able to sort out issues they are presented with...

[bullit]

on a serious note - a mod doesnt have to be picked on "saxo knowledge" surely? isnt it about maintaining the smooth day to day running of the site, being able to sort out issues they are presented with...

thats where i come in, ill mod the mods ;)

[bullit]

on a serious note - a mod doesnt have to be picked on "saxo knowledge" surely? isnt it about maintaining the smooth day to day running of the site, being able to sort out issues they are presented with...

for a general yes but for someone chosen is to not just mod but look after the technical sections then knowledge is needed. someones got to know whats works and what doesnt, what fits etc so false information isnt posted as much. etc. thus running smoother

[Danr]

Bullit replying to the same post twice, i like it.

I can understand the point of having someone who knows what they are doing moderating but is too much knowledge of a subject a good thing. Does it mean, say, that if someone asks a question and someone answer's it wrongly that the mod will come in, answer it, belittle the person who answered it wrong and then close it. I've always thought a mod is there to make sure the forum doesn't get out of hand?

I'd personally say people such as Adsayer, furioal, Pred are all quite level headed people on the forums. You don't really see them in the thick of a pointless e-argument.

[daisax]

Predator FTW!!(learnt the ftw saying now lol)
Anyways on a serious note, i do not kno anyone on this forum that first helped me besides predator. He is a helpful member, and as staff id say you would not be disapointed. He willl help anyone he can and is a source of countless information :D and has awesome how-to-guides. !!

[Ryan]

Bullit replying to the same post twice, i like it.

I can understand the point of having someone who knows what they are doing moderating but is too much knowledge of a subject a good thing. Does it mean, say, that if someone asks a question and someone answer's it wrongly that the mod will come in, answer it, belittle the person who answered it wrong and then close it. I've always thought a mod is there to make sure the forum doesn't get out of hand?

I'd personally say people such as Adsayer, furioal, Pred are all quite level headed people on the forums. You don't really see them in the thick of a pointless e-argument.

why close a thread if youve corrected the information?
its no longer a discussion - which is what 95% of the threads are about.

the only threads that really need locking are the usual ebay shit ones, and ones which get repeated weekly.

thats tidying it up and making it run smoothly aswell as getting the correct information to the users required.

[MaRiO89]

I definatly think Ryan should be mod as i have said before..He knows an awful lot and since i have been speaking to him on MSN i have learned alot..Not just about cars but photography too..He's a very handy chap to have about and he is on here an awful lot aswell, which i think is a huge deciding factor into choosing a moderator..

This is also a reason why i would like to have a moderator position as i'm on here everyday, i know more than enough about saxo's, i have first hand experience with the modding side of things etc aswell..

:y:

[Vinny_VSX]

Ryan does know his stuff. Very knowledgeable about saxo's and about camera's as well. But (no offence at all mate) I don't like his replies to some people. He can come accross as a bit arsey and some users might get a bit frustrated. I am sure he is a sound guy in person though and I will be probally eating my words after meeting him at traxs.

Anyways I have known James_Bristol for nearly a year and quite regulary hang out with him. He has tought me a lot about the saxo in general. Which has proven to be very handy. So your probally thinking, hmm I will be voting for James. But your wrong, as he owes me £2 ahahaha.

Ok enough mumbo jumbo. Hands up for Ryan to be mod and then hands up for James? You know the rest ;)

[MaRiO89]

Cheers for the reply vince..Atleast someone thinks i am capable..LOL

;)

[PRICEY-VTS]

a think simo should get the top 20 ppl for the job and then do a pole but only let ppl vote once though or they will be a bit of cheating going on ??? lol

[daisax]

adsayer, pred, furioal top 3 candidates get a pole on for them

[Ryan]

a think simo should get the top 20 ppl for the job and then do a pole but only let ppl vote once though or they will be a bit of cheating going on ??? lol


which turns into a vote for your mate not who is actually capable for doing what is asked by the admin on the forum.

[leeroybrown]

Pred Gets My Vote

[Clouds_mate]

i think it should be Hesslevtr if he still knocks about. Knows pretty much everything about everything.

[Karl]

yeah Hessle was a bit of a legend..
not seen him on in a while.

pffffft, anyways Simo wanted a more technical mod (knows about Saxo's) by the looks of the description.

[Ste]

As long as whoever it is isnt a thread locking cock im not bothered tbh.....this part of the forum has been safe since i came lol

[Yates]

It shouldnt be restricted to just one

I have ryan on speed text so its ok if hes not mod but i know alot of people see his comments as arsey, but normally when he is, its a stupid question thats been asked or someones failed to see that hes joking, he knows all his stuff and is very helpful.

pred and hessle do know there stuff as well tho

i think there should be a few

[Colin]

Me lol.

EDIT.

I'd like to be one but im not on here alot. Ive learned so much about saxos and mainly from williams.

But I have first hand experience at building rally cars, drag bikes and american muscle cars.

I have a good knowledge of cars in general, as ive done NVQs etc, not just Saxos.

So I will put my name down to be a Moderator.

Oh and im NEVER in general chat or anything like that lol.

[Mystic]

What would a "Tech mod" acctually do?

General moderation of the technical forums? In which case any responsible member could do it. Or would they moderate misinformation aswell & thus need pretty good technical knowledge.

I'll put my name forward for consideration. I tend to spend more time in the tech forums than the general ones anyway & i think my reputation comments will back that up too. Most of what i know, i've learned in here & the rest from working on my (poor) saxo ;)

I'd say im a little less 'cliquey' than some of the other more obvious candidates too, which may or may not work well for me in a poll :detective:

Mystic for president :y:

[Karl]

...Ill put my name down for SE RMO ;)

[stevenet15]

i'd be up for helping out ;)

[Karl]

tbh stevenet is a bit of a beast in these sections too!

[Yates]

never trust a pikey esp one with his top off smiling at you

[stevenet15]

never trust a pikey esp one with his top off smiling at you

:afro:

[Jimmy-Boy]

ithink itsafastworld tbh :y: - axracing is a good runner up :y:

[bullit]

i'd be up for helping out ;)

was gonna mention you ste but the avatar ruined the vote lol

[mattchewone]

Hessle, Pred, Adsayer or Furioal

[Ryan]

I'd say im a little less 'cliquey' than some of the other more obvious candidates too, which may or may not work well for me in a poll :detective:



a key comment there, moderating a forum is about keeping the forum running smoothly, not locking threads for the sake of it (as in my experience the more threads get locked the less people are willing to post on the forums), not about being part of a group who are 'to cool for school'

id also like to comment that half of the people with derogative comments against me barely even post in this section lol!

[Yates]

in the engine section we often see saxp fucktards, ryan can help wash them away

[Ryan]

in the engine section we often see saxp fucktards, ryan can help wash them away

you're still here tho ;)

[Yates]

you're still here tho ;)

ryans a cunt like everyones said. give it to someone else.

i hate ryan

[Ryan]

ryans a cunt like everyones said. give it to someone else.

i hate ryan

*blocks matts mobile number* lol

anyway stop the spam this is a serious thread.

[Yates]

mods shouldnt spam

[Sophia_Bush]

At the end of the day the man is giving you the help and information up front. Ryan is just being truthful and giving you no B/S, if you ask a straight sensible techie question then he will give you an asnwer.

The only reason he may seem up it is because people just don't listen sometimes and shoose to ignore what is good advice.

At the end of the day what would you prefer good up front advice or shite nicey nicey bollocks?

[Yates]

At the end of the day the man is giving you the help and information up front. Ryan is just being truthful and giving you no B/S, if you ask a straight sensible techie question then he will give you an asnwer.

The only reason he may seem up it is because people just don't listen sometimes and shoose to ignore what is good advice.

At the end of the day what would you prefer good up front advice or shite nicey nicey bollocks?

my point exactly

also is your user name ment to be rude or somethin cos im lookin at it thinking it should be but it doesnt seem to be

[bullit]

my point exactly

also is your user name ment to be rude or somethin cos im lookin at it thinking it should be but it doesnt seem to be

google it

[Sophia_Bush]

haha yes google my name!

[Toad]

No one ever listens to me, so I'll stay out of this one! ;)

There's lot's of folk on here who've been very helpful, so if I was to vote for just one, I would feel somewhat bad about it I suppose.

It's a toughy, but I'm going to vote for Ryan. I think everytime he uses bad, condescending, abusive, obnoxious, and offensive wording, it’s been completely called for! ;) Oh yeah, he knows a thing or two as well…

[Yates]

toad your another person who is very helpful, theres so many people about

i have googled your name, and if thats what you look like il fck you

[bullit]

you would, would you

http://www.zetnet.co.uk/~pm/photos/toad.jpg

[Toad]

Thanks chap ;)

I don't know nearly enough about cars to be a "techy." Computers and networking is my field. Anyone got any PC issues, drop me a PM, lol.

[Toad]

Damn it Bullit! Did you have to show a picture of me just after I got up! FFS...

[williamsvts]

id be willing to do it, busy getting a phoneline sorted now so should be back on more often within the next few weeks.

[Yates]

bullit i was on bout wallace name

toad you know stuff, always helpful, sometimes a bit grouchy tho ;)

[Ryan]

id be willing to do it, busy getting a phoneline sorted now so should be back on more often within the next few weeks.

off topic, hows the nova coming along?

[bullit]

bullit i was on bout wallace name

toad you know stuff, always helpful, sometimes a bit grouchy tho ;)

did you ;)

you mean i googled it for you

[Yates]

off topic, hows the nova coming along?

*in a mods voice 'thats what the pm system is for' *

[Yates]

did you ;)

you mean i googled it for you

yes you did it

[Toad]

Not grouchy, just got a VERY dry sense of humour. Sadly, it doesn't always come across in the right manner on a forum. Bit like texts... I'm shit at those.

[williamsvts]

off topic, hows the nova coming along?

starting to come together a bit better, had a dodgy oil pump that wasnt geting pressure up and was making it smoke alot, got that sorted on monday.
ran 14.6 1/4 miles all day on sunday aswell.
got some new suspension, gear linkages, brake pads and cabs to go on :panic:

[Ryan]

starting to come together a bit better, had a dodgy oil pump that wasnt geting pressure up and was making it smoke alot, got that sorted on monday.
ran 14.6 1/4 miles all day on sunday aswell.
got some new suspension, gear linkages, brake pads and cabs to go on :panic:

glad to hear the improving is comming along with it swiftly.

[Ryan]

*in a mods voice 'thats what the pm system is for' *

kiss my ring!

anyway. whats the timeframe for this thread?

as in when is simo planning on appointing people, to stop matt spamming ;)

[williamsvts]

got some GAZ dampers that look really well built, 275lb front springs and 240lb rears.
done a canny bit to the engien aswell
new:
lifters
valve stem seals
cam oil seals
rocker gasket
timing belt
sump gasket
oil pump

basically rebuilt :P

gunna get some hi comps for when i fit the carbs.

[Toad]

Thanks for the vote Ryan... See what I mean about nobody listening to me... ? Not even the git i just voted for. Can I have a refund? ;)

[Yates]

simo has just pm'd me he said your a cunt ryan and hes not giving a mod job to you

[Ryan]

Thanks for the vote Ryan... See what I mean about nobody listening to me... ? Not even the git i just voted for. Can I have a refund? ;)

haha i didnt realise it was a vote for me if you vote for me system.

i think now a large discussion has happened and it should be just left to the admin to sort out when they feel its the correct time to do so.

and dude - on a side note alot of people do listen to you and resepct your comments!

[Ryan]

simo has just pm'd me he said your a cunt ryan and hes not giving a mod job to you

must be skilled seeing as hes not online. ;)

[Sophia_Bush]

haha if I looked like that Id be a lesbian with anothet fit girl to wind you lot up mwahaha

[Toad]

haha i didnt realise it was a vote for me if you vote for me system.

i think now a large discussion has happened and it should be just left to the admin to sort out when they feel its the correct time to do so.

and dude - on a side note alot of people do listen to you and resepct your comments!

Ooo, I feel all tingly inside. :hug: haha...

So, do you think they'll organise a poll or just do as you've said?

[Ryan]

Ooo, I feel all tingly inside. :hug: haha...

So, do you think they'll organise a poll or just do as you've said?

ill let you have one of my favourite replys to bhp questions.

how long is a piece of string? ;)

[Toad]

*goes and checks on Google*

[Joesnow]

in the engine section we often see saxp fucktards, ryan can help wash them away

I totally agree with this… think there are from time to time quit a lot of fucktards that come into the technical sections and it gives saxos a bad name!

All the people who post about ebay chips, open filters, electric supercharges, spamming, people who boast, bhp questions and just randomly crap threads get on my tits!

I think that the less BS there is in a forum, more technically minded people are going to browse and post and the forum will become more useful for everyone.

They need to be put in their place and directed to a sticky rather than a pointless discussion. Its been getting better recently though

IMO there should be a few moderators who just cut out the BS. There are loads of people on here who are knowledgeable and consistently helpful and in need of a promotion…

Just to name a few: itsafastworld85, kamracing, axracing, williamsvts, stevenet15, toad, adsayer, hesslevtr, gabbastard, predator_vtr….

Just a few names that stick out as good candidates there are loads more though sorry if I didn’t mention you…

[williamsvts]

what you doing to your car?? is that avi a recent pic??

[Joesnow]

what you doing to your car?? is that avi a recent pic??

That’s from when I put that Gti engine in... cheers for the tips on that btw… if only you’d told me I didn’t need to take the front off before I’d actually taken it off lol made it easier though!

[Ryan]

That’s from when I put that Gti engine in... cheers for the tips on that btw… if only you’d told me I didn’t need to take the front off before I’d actually taken it off lol made it easier though!

having the whole front off so just the front crossmember is there makes it alot easyer for sure dude!

[Grand_Champ]

itsafastworld aka Ryan is the man for the job....no debating needed :clapping:

[Colin]

Guess thats me out the window then.......

I really would love to be mod but hey....

[Simo]

'Some' good discussion going on in here peeps.

The position(s) up for grabs do require a technical knowledge, as that is the main reason for the appointment... to have someone available to keep threads on track, to stop the promotion of bad advice, which more often than not people pick up, then try to pass on to others. :err:

I'd like to develop a truly 'technical' aspect to the forum, for hard core tech-heads... but currently am not sure how this would integrate with the more general technical forums. :err:

Its pleasing to see some of the candidates I had thought of, have put themselves forward.

Myself and Scott will discuss this in more detail and let you know whats going to happen.

Off the top of my head though, I'd say it's likely there will be 3 appointments in the tech forums... and maybe a few other changes thrown in too.

[Colin]

Im excited even if its not me lol

Nice one Simo!

[williamsvts]

:edit: talking shit

[stevenet15]

to stop the promotion of bad advice, which more often than not people pick up, then try to pass on to others

i totally agree with that as in some threads i have read posts that give totally wrong advice e.g lowering by notches and then thats passed on to one person and then they pass on to another and so on then everyone thinks lowering by notches is the right way when its not. So i thinks its a great idea that if we have 3 people assigned to help reduce bad advice it will benifit everyone

[saxodan]

I think...

Yates would be good for the job, seems to know what hes doing with his car
svennet as above, hes allways doing something with his car

hessle would be a good choice, but he hasnt been about much.. and im not a great fan

havn't seen much of itsafastworld but he seems to be favourute

[Karl]

Ryan (itsafastworld) just hangs in this section, thats why :P

[Ryan]

Ryan (itsafastworld) just hangs in this section, thats why :P

hahaha!! i do venture into the suspension section, and occasionally some other sections when i see advice needed about roll cages and gearboxes etc....

[Ryan]

i totally agree with that as in some threads i have read posts that give totally wrong advice e.g lowering by notches and then thats passed on to one person and then they pass on to another and so on then everyone thinks lowering by notches is the right way when its not. So i thinks its a great idea that if we have 3 people assigned to help reduce bad advice it will benifit everyone

best comments ive read so far were you should fit 708s to a vtr ;)

[Karl]

...that was my bad the old 708s in a VTR.
perhaps I was tired..
perhaps i know shit all ;) answers on a post card :P


..and Ryan, I noticed you posted a cheeky comment about germans earlier. lol

[MaRiO89]

best comments ive read so far were you should fit 708s to a vtr ;)

Whats wrong with that? :wall:










;) :P

[Karl]

*expects comment from Ryan like..."nothing wrong with 708s in a VTR, just like there is nothing wrong with your ride height James"*

[Ryan]

...that was my bad the old 708s in a VTR.
perhaps I was tired..
perhaps i know shit all ;) answers on a post card :P


..and Ryan, I noticed you posted a cheeky comment about germans earlier. lol

haha! i actually love german people, but the banter is good!

nah ive seen that comment several times so not just you if it was so.

[Ryan]

*expects comment from Ryan like..."nothing wrong with 708s in a VTR, just like there is nothing wrong with your ride height James"*


rolf..

[MaRiO89]

rolf..

Whats rolf?!?!

Should be ROFL..haha

Nothing wrong with my ride height chaps..;)

[Ryan]

Whats rolf?!?!

Should be ROFL..haha

Nothing wrong with my ride height chaps..;)

no it shouldnt be rofl!

ROLF - rolf harris ;)

ssc'ers know it :p

and ive discussed with you ride height, geometry - spring rates and torsion bar rates before.

[MaRiO89]

no it shouldnt be rofl!

ROLF - rolf harris ;)

ssc'ers know it :p

and ive discussed with you ride height, geometry - spring rates and torsion bar rates before.

Ok rolf..:P

It handles the same as it did when i had it high on my billies..Ah well...seems ok to me..;)

[Ste]

I rekon we should get a poll of users who've opt'd to be forum power whores....then vote accordingly........

[Ryan]

Ok rolf..:P

It handles the same as it did when i had it high on my billies..Ah well...seems ok to me..;)

as discussed on mmsn about the damping of your rear end :homme:

[Yates]

i know fuck all bout engines

got stuck on brakes today, ryan didnt help me, leeroy didnt, it was williams that said wind the caliper :P

[AXracing]

I have only got round to reading this thread and nominate anyone but me lol. But thanks for the nomination guys. I would tend to say avoid any one that is on here partly for a living. Such as engine tuners and tuning parts supplies. Whoever is picked it must be some one who really wants to or there is no point. Itsafasworld85 wants to so it I say let him. I think he would be quite good at it and not just take the piss.

[Ryan]

i know fuck all bout engines

got stuck on brakes today, ryan didnt help me, leeroy didnt, it was williams that said wind the caliper :P

you txt me when i was at work, i replied with use a screwdriver im at work.

i helped you out with the quaife and final drive info though ;)

[williamsvts]

i drive a nova thoguh :P

[Ryan]

i drive a nova thoguh :P

its ok give it a year and the rust will mean youll have a nice engine and a pile of crums on your drive ;)

[Toad]

In Ryan we trust. Looks like a job is coming your way! ;)