Headlights, do they come apart (easily)?
 

Hi

Before I go and get my rather expensive new xenon hids out of the packaging and installed (with its projectors:p). Will the lense of the headlights easily come away from the main housing so I can get in at the reflector?

Thought id as here first as I cba unbolting the headlights to find out as Im not doing the install today anyway. Its also pishin doon ootside ;)

Cheers :y:
Cammy

Had mine apart to spray the inserts, heated with a hairdryer and prised open with a flat blade screwdeiver, easy enough :y:

yeah its just softening up the glue stuff that takes time to get them apart, heard some people put the light in the oven but would personally rather use a hairdryer just to be safe and not melt anything

Hairdryer?

How bloody long did that take, I used a propane torch

I put mine in the oven for 5 mins, once the oven's heated up, then just used a knife to spererate them, Easy job.

Honestly not very long at all

Cheers

Iv got an Agga that only does very hot so wont be going down the oven route.

I do have a heat gun though that Iv been mainly using for heat-shrink tubing (best invention ever!!) so Ill use that and hope it does the trick.

As for putting the lense back on?

Same again, warm up the glue and place in correct place