3" system

[medz_vtrturbo]

just wondering if anyone knows if i can get a 3" straight through system custom made for my car???
rep will be given
cheers

[AdamH]

powerflow do custom exhausts.. any noise you want / specs etc

but tbh.. a supersprint system and mani is probs the best... not to loud but loud enough to make you smile :) specially if its cammed etc

[williamsvts]

its turbos, thats why his name has turbo in, lol.

yeah you can get 3" but imo wil be overkill for yours.

[RCD-Performance]

over kill :)

[medz_vtrturbo]

so what size would you boys reccomend???
2 and 3/4 "??

[RCD-Performance]

without knowing full spec i estimate 2.5-2.75max

[medz_vtrturbo]

without knowing full spec i estimate 2.5-2.75max


here is best part of the spec
t2/t25 turbo running 12 psi
mf2
sig con
2x330cc injectors
2 headgaskets
custom turbo manifold

that any good to you?
isnt a standard system 2 and a 1/4 "??

[williamsvts]

not on a vtr, its under 2" iirc. vts exhaust OD is 2" so ID will be just under.

[medz_vtrturbo]

so what size would you reccomend?

[williamsvts]

2.5" imo.

[RCD-Performance]

2.5 will be plenty

[Ryan]

2.5" bore is perfectly fine for 99% of boosted TU applications

[Krys_23]

What about the pugsport in the forsale section? Wouldnt it do the job?

[Ryan]

What about the pugsport in the forsale section? Wouldnt it do the job?

2.25 bore, if hes running boost i personally wouldnt want a 2.25

[leeroybrown]

3inch

I own a scooby and even i aint running that

2.25 is fine for N/A engines

Boasted ones would defo say 2.5

[RCD-Performance]

It all depends on the application, too big and you risk loosing the back pressure required.

[saxmad88]

i would predict a 2.5 inch exhaust most tu charged engines are running 2.5 and seems to be good. What about a btb exhaust if you can get hold of one?

[tweeqd]

mines a full 2.5 SS system, i had it custom made by Janspeed
its from the Turbo back with custom rear box and 3'' tailpipe, but it was £820

[medz_vtrturbo]

ive been quoted 300 quid for straight through stainless from turbo back, which i think is a bargain.

[williamsvts]

is it mandrel bent? if not it wont be 3" ALL the way, it'll be thinner in the bends.

[tif992ss]

clicky (http://www.tonylawexhausts.co.uk/)
we have used this firm quite a few times for the various rally cars we've had . Nice jobs but you pay top dollar
Aid

[medz_vtrturbo]

is it mandrel bent? if not it wont be 3" ALL the way, it'll be thinner in the bends.


the price was for a 2.5" system:y: