wiring help pleaseeeee

[nicole_]

just putting engine back in and connecting everything up
few random bits still..

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00980.jpg
Where does the small wire go? And is there meant to be a sensor that goes on the connecter with the 2 pins in it?

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00976.jpg
Random yellow wire. Had no connector on it, I put the blue one on it. Comes off one of the big plug things next the PAS pump.

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00973.jpg
From near the fuse box, what plug goes with it lol?

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00972.jpg
Cant find anything to match up with that either.

Also Im putting a vts fan & housing on so different wiring. I just plugged the grey conntector it has on it into the engine fuse box. Is that right? lol. The fan loom has this wire on it, where it go?

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00975.jpg


I thought to wire the fan up couldn't I just cut the wires where the conntector is and wire it into the standard vtr fan loom?

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00978.jpg

[jeffchiz]

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00980.jpg


the big and small wires go on to the alternator, and yes there is supposed to be a sensors which lugs in tot he 2 pins on the block

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00973.jpg


this is on my car doesnt have anything going in to it on mine

[jeffchiz]

actually that gray connector has some sort of square rely looking thing attached to it on mine and you seam to have the wrong alternator for that wiring loom

[baja18]

I also have that plug under fuse box and it's not connected anywhere,its just unused ;)
http://img219.imageshack.us/img219/6136/dscn1371lh2.th.jpg (http://img219.imageshack.us/i/dscn1371lh2.jpg/)

[raunchz]

on the alternator, get rid of that yellow block connector and solder the wires together and heatshrink it.

You need to cut the ring terminal off, and solder on a 2 pin connector to fit on the alternator, from memory it goes to the pin on the right of the 2 pin as you look at it.

the rest of the plugs/wires are anyones guess! Best bet is to see which engine sensors are unplugged and go from there

[jeffchiz]

http://i262.photobucket.com/albums/ii113/benkelsall/DSC00972.jpg

isnt that the map sensor

[raunchz]

pretty sure MAP sensor is 3 pin ?

nicole, where abouts in the engine bay is that brown plug ?

[jeffchiz]

pretty sure MAP sensor is 3 pin ?

nicole, where abouts in the engine bay is that brown plug ?

you are right Mr raunchz it is indeed three pin, i couldnt find a 2 pin grey plug on my vts, but it was cold and raining so i didnt look too hard lol

[Yates]

brown plug isnt from inside the wings is it? seem to remember plug like that just out of the bay and under wing

[raunchz]

^ ^ Think you're right tbh, the purge cannister inside the drivers wing.

[jeffchiz]

oh it looks grey to me but yes there is definitely a brown connector in the drivers wing which i no longer have when i did my conversion i whipped it out

[nicole_]

cheers guys :D
worked out one of them was the indicator :oops: lol
and sorted the alternator out :y:

[jeffchiz]

cheers guys :D
worked out one of them was the indicator :oops: lol
and sorted the alternator out :y:

lol dickhead :P