Jay's flat arch project,

[jayline]

THE BIG NEWS:

so this is the update you all have been waiting for, the car WILL be done by the end of the month! i have now finished paying for the car to have the new head fitted along with the loom and ecu! also i will have a new headgasket, timing kit, stud n nuts and what everything else will be new :)

this will be happening on the week beginning the 26th!

also in january the saxo is booked in for a refurbed axle with new uprated bushes, brake lines, to have any rust if any to be treated and also the underneath and inside of the car will be painted! all the nuts bolts washers, clips and so on will be replaced with new ones!

thanks for looking, please comment :)

[Jay_]

Guessing you're getting a disc beam if you haven't already?

[jayline]

Guessing you're getting a disc beam if you haven't already?

I have indeed got one but going to do an exchange with it for a new one with bigger arb!

[jayline]

Some more good news! The car is getting a respray in black but need to choose if its going to be matte or satin? Help!

[Cam]

You got your license yet?

[Tom5190]

No! matt and satin are ghey get a proper color!

[Gandi699]

I second that

[Saxovch22]

+1 could understand if it was a full on track car getting painted matt/satin

concerned at

1. how you going to insure this ?
2. how you going to be able to handle the power if you havent even driven without instruction before ? (seen your boost thread)

other than that i do like the car alot!

[jayline]

No! matt and satin are ghey get a proper color!
What color would you suggest?
I second that
As above?
+1 could understand if it was a full on track car getting painted matt/satin

concerned at

1. how you going to insure this ?
2. how you going to be able to handle the power if you havent even driven without instruction before ? (seen your boost thread)

other than that i do like the car alot!
By the time this is done ill be 21 so insurance will be fine as I can go on my dads insurance and I have 1500 saved for it already! I've driven a few turbo'd cars already so I know what to expect! Also I will not be a teat and be doing 100 in a 30 lol! And cheers pal can't wait to get it done!

[jayline]

You got your license yet?

Passed my theory so now for the big test!

[consvts]

Passed my theory so now for the big test!

about time mate

am waiting for ya to hurry up

[jayline]

about time mate

am waiting for ya to hurry up

Cheers matey! And it's hard when your saving for a flat to lol! I have to cycle 8 miles a day to work just to save 200 a month lol

[Tom5190]

Black is fine just not in satin or matt get it in metalic/gloss

[consvts]

Cheers matey! And it's hard when your saving for a flat to lol! I have to cycle 8 miles a day to work just to save 200 a month lol

least u can cycle ha ive to walk or get the gf to drive me around its a pain :/

[jayline]

Black is fine just not in satin or matt get it in metalic/gloss

cheers pal, ill look into it! and please check the pics below as these are the reason why i wanted matte or satin!

least u can cycle ha ive to walk or get the gf to drive me around its a pain :/
haha its good though as i save a fair bit so i can fund my car and flat lol!

[jayline]

what your opinions on the pics below minus exhaust and lights!

http://i1094.photobucket.com/albums/i450/Jay_Line/idea.jpg
http://i1094.photobucket.com/albums/i450/Jay_Line/idea3.jpg
http://i1094.photobucket.com/albums/i450/Jay_Line/idea2.jpg

this is why i got a respray sorted to get the inside and out side like this! what do you guys reckon stay with how it is or convert back to a sleeper style?

that 1st picture makes me want to do this but with a cage buckets and the uprated engine but leave the outside standard even the rim color!

[Tom5190]

Personally i think it looks gash but its personal taste i guess

[jayline]

Personally i think it looks gash but its personal taste i guess

Thank you for being honest! Guess ill look at gloss black!

[Tom5190]

I just think that a clean car/good paintowrk sort of makes a car, the likes of Simon for example, were as matt/satin never really looks 'clean' as such if that makes sense.

[jayline]

I understand matey, it's black or get the car sprayed posi blue again?

[consvts]

id go with the pics above ha it looks well

[Xplodee]

I like it but I think gloss black would look much better tbh.

[jayline]

Well plans where to get my morettes repaired and then get the respray so all the car is one colour and seeing that pic above made me think lol

[consvts]

go for it lad pick the one that will make ya smile every time ya see it and be proud to own it

thats the way i see mine...

[jasonmayall]

what your opinions on the pics below minus exhaust and lights!

http://i1094.photobucket.com/albums/i450/Jay_Line/idea.jpg
http://i1094.photobucket.com/albums/i450/Jay_Line/idea3.jpg
http://i1094.photobucket.com/albums/i450/Jay_Line/idea2.jpg

this is why i got a respray sorted to get the inside and out side like this! what do you guys reckon stay with how it is or convert back to a sleeper style?

that 1st picture makes me want to do this but with a cage buckets and the uprated engine but leave the outside standard even the rim color!

Do it.

Looks ace!

Just had a read through your thread, briefly... Looking good!

[Bedford126]

All depends on how its prepared and painted. Look at beanimoo's satin saxo where the car was prepared and painted correctly and it looks amazing and very clean. Then look at some half arsed bastard painting his car with a roller on his drive never looks right and looks patchy as fuck.

I personally think a satin black with gloss black accents would set the car off a treat.

[jayline]

Do it.

Looks ace!

Just had a read through your thread, briefly... Looking good!
Cheers bud, can't wait for next week to hurry so it's running! So exicited!
All depends on how its prepared and painted. Look at beanimoo's satin saxo where the car was prepared and painted correctly and it looks amazing and very clean. Then look at some half arsed bastard painting his car with a roller on his drive never looks right and looks patchy as fuck.

I personally think a satin black with gloss black accents would set the car off a treat.

Cheers man I like your thinking of satin and gloss black! Well I'm not going to go buy a load of paint an do it myself with a roller, ill be paying a sprayer to do it correctly lol!

[Jay_]

Matt black looks cheap as fuck IMO.

[Prickle]

I dont know where to start :fcuk:

If you're happy then thats all that matters.

[jayline]

Matt black looks cheap as fuck IMO.
Ok then what color do you suggest?
I dont know where to start :fcuk:

If you're happy then thats all that matters.

Haha, I'm just throwing out ideas about what color to do it!

[christoph]

Go with the gloss mate. . looks much fresher :y: Also after all this work your doing how is insurance going to fair up. . as you'll be starting a fresh?

[manta]

I agree with bedford to be honest.

My old car was gloss black with certain parts satin.

On my black vts mkalmost2 im going with a satin grille, spolier and prob mirror caps.

Will have to see.

[Jay_]

Ok then what color do you suggest?

Not read all the thread, but why not leave it posi blue?
Go with the gloss mate. . looks much fresher :y: Also after all this work your doing how is insurance going to fair up. . as you'll be starting a fresh?

I asked and I think he bounced the figure 2k I think? I thought it would have been more tbh.

[jayline]

Not read all the thread, but why not leave it posi blue?

Fancied a change tbh! Freshern it up a bit!
I asked and I think he bounced the figure 2k I think? I thought it would have been more tbh.

With everything declared but not the respray it's around 2k on my dads insurance!

[Mikol]

Jay! Sorry i didn't text you back it's been a mad week.

I still have that brace - I can keep it by for you and do a bit of a deal if you like :) No worries!

[jayline]

Jay! Sorry i didn't text you back it's been a mad week.

I still have that brace - I can keep it by for you and do a bit of a deal if you like :) No worries!

Pm me what you have in mind! And it's all good matey I'm working 50-60 hour weeks ATM to find this car lol

[Dan-Subtle]

Personally I would concentrate on getting the car running and your test passed and then worry about tarting it up and making it look nice/going fast.

Considering you have said that you've driven various cars turbo'd etc you should pass the driving test with your eyes closed so concentrate on getting that passed and the car up and running and legal to drive (MOT'd, Taxed and insured).

Just my personal opinion as this thread has been going for 7 months and still you've not actually driven the car, I know for me that's the best part of having a car is actually going for a drive. You could have the nicest looking car/best engine/best suspension etc but if you can't/don't actually drive it its pointless.

[jayline]

Personally I would concentrate on getting the car running and your test passed and then worry about tarting it up and making it look nice/going fast.

Considering you have said that you've driven various cars turbo'd etc you should pass the driving test with your eyes closed so concentrate on getting that passed and the car up and running and legal to drive (MOT'd, Taxed and insured).

Just my personal opinion as this thread has been going for 7 months and still you've not actually driven the car, I know for me that's the best part of having a car is actually going for a drive. You could have the nicest looking car/best engine/best suspension etc but if you can't/don't actually drive it its pointless.

Hi dan, if you read I think a page back you will see that the car is getting sorted next week which includes head gasket, cambelt, service and all braking system plumbed in! It will have a mot soon as I want to drive it with l plates for a bit! I've just past my theory test and just going to have a few more lessons then book my test! I have 1500 put away for insurance already so that's a good start! I do agree that's why I'm throwing a lot of cash at it as I'm racing thought my licence! Also It may of been 7 months but tbh at the end of it I think it will be worth the wait, also I have been in and out out jobs since owning this so money has been tight but now I have a good (ish) income so now I can step it up a gear! Rome wasn't built in a day ;)

[piggy123]

Just my personal opinion as this thread has been going for 7 months and still you've not actually driven the car, I know for me that's the best part of having a car is actually going for a drive. You could have the nicest looking car/best engine/best suspension etc but if you can't/don't actually drive it its pointless.

im sorry Dan but i completely disagree...... what about the people who own beautiful classic cars or full thorough-breds who wait a whole year for that ONE DAY to drive it then it goes away for the rest of the year.

Jay, having spoke to you..... you know my opinion on this matter... do it once do it properly no matter how long it takes :)
Short term pain - Long term gain :D

[jayline]

Thank you Sam, as you said I could of got this running months ago but I realised that I wanted a different head with loom and Ecu so instead of forking out for 2 head gasket, cambelt and services, I was patient and waited to had all the bits I wanted fr a good price! Yes I may off spent money on bits I didn't need yet but that because they were at a price that was more than reasonable IMO! So. As mentioned above I have all the engine and exhaust setup I need so now it's going into a garage to get done as I'm working a lot to get my promotion I'm inline for! So fingers crossed weekend after this one I should have a vid of the exhaust and it driving :) Sam ill see you this weekend? Have some cash for them frames :)

[bobertmate]

please please please keep it Posi Blue and make it a proper sleeper! Love posi :(

i will get another posi flatty and convert it at somepoint in the future :D

[jayline]

please please please keep it Posi Blue and make it a proper sleeper! Love posi :(

i will get another posi flatty and convert it at somepoint in the future :D

It's in a debate ATM what colour it goes! And I do like the sound of a sleeper! Was thinking Rallye steels with a bit of a band next?

[greyjasper51]

Is it running yet jay?

[jayline]

Is it running yet jay?

Wtf no! It's early next week it's booked into be sorted!

[greyjasper51]

Wtf no! It's early next week it's booked into be sorted!

Booked in for wat?

[jayline]

Booked in for wat?

if you read above its getting alot of work done.....

but for you i'll list it, rallye head to be fitted with new h/g, cambelt, nuts and bolts and then a good service of all new fluids, oh and th driveshafts and braking system!

[greyjasper51]

Aww arent you sweet :-)

So fee hundred there...

[jayline]

Aww arent you sweet :-)

So fee hundred there...
only for you :homme:

a fair few matey! then january is another expensive time as im getting the cage fitted and all the inside painted black! Then theres the outside to do aswell!

[piggy123]

I swear some people posting in this thread are being idiots in an attempt to get under your skin Jay.... I'd take it as they are jealous....
Subframes will be winging there way to you this weekend :)..... Anything else you'd like me to bring? :D

[Mikol]

I swear some people posting in this thread are being idiots in an attempt to get under your skin Jay.... I'd take it as they are jealous....
Subframes will be winging there way to you this weekend :)..... Anything else you'd like me to bring? :D

Ohhh, if you're coming past could I meet you for those brake lines? ;)

[greyjasper51]

only for you :homme:

a fair few matey! then january is another expensive time as im getting the cage fitted and all the inside painted black! Then theres the outside to do aswell!

i take it you havent decided yet what colour your going?

[jayline]

I swear some people posting in this thread are being idiots in an attempt to get under your skin Jay.... I'd take it as they are jealous....
Subframes will be winging there way to you this weekend :)..... Anything else you'd like me to bring? :D
Haha, it does cross my mind tbh! Thank you Sam subframes will be all for now! Got a little cash for you till next time!
Ohhh, if you're coming past could I meet you for those brake lines? ;)
Everyone meet at mine ;) be a nice gathering lol
i take it you havent decided yet what colour your going?

Not yet, it's tough one to decide on tbh mate!

[jayline]

So tomorrow is the day te car is at the garage! It's the first thing on the list to do early tomorrow! So hopefully it will be back before I go work at 3!!

[JoshO]

I signed up finally mate =] wheres all the photos of the progress eh?? =]

[jayline]

I signed up finally mate =] wheres all the photos of the progress eh?? =]

Wheyyyy, all through the thread mate start at page one and go through! Cheers for today will see you soon to get it finished! Shame about running out of time and light!

[JoshO]

Will do mate =] yeah, thats the downside of working in winter, short days. Ahwell. We'll get it done soon =]

[jayline]

Will do mate =] yeah, thats the downside of working in winter, short days. Ahwell. We'll get it done soon =]

We will when yoi can next do it :) also start looking at bolting the cage in to :) Ps get a thread up if your beauty ;)

[Dan-Subtle]

How's this coming on Jay?

[jayline]

How's this coming on Jay?

Very well thanks its all together, just waiting on a fuse box I paid for last week to arrive! It's all plumbed in and waiting for the final piece :) also my lovely girlfriend got ly some new gearlinkages fr a group buy on here so tey will go on asap! then the next thing to do is sort out the cage being bolted down but that might have to be after Xmas as funds are low due to buying prezzies! I am ATM talking to a certain person about a turbo setup they have for sale so if all goes well February time I should have the main bits to start the turbo build!

[jayline]

A few pics didn't get much of them as was busy helping and so on!

http://i1094.photobucket.com/albums/i450/Jay_Line/9355E44A-59FD-4D55-B2B0-778B9DD8D956-3471-00000596142F67DC.jpg
http://i1094.photobucket.com/albums/i450/Jay_Line/A44121D4-DEA9-4D09-AA0E-8F1EA3A1A646-3471-000005961D8ABC81.jpg


Forgot to mention that the Ecu is being mounted inside the car as I wanted to make more room in the engine bay!

[jayline]

so today ive been a busy man and now im off back to kent for a few weeks so car will not prgoress till im back...

all thats left is to:
.tappets
.fluids
.fit fusebox (when it arrives)
.fit manifold and exhaust (waiting for manifold nuts from shitreon)

today i spent a fair few quid on a new exhaust fitting kit, i.e bushes, stud n nuts, clamps, paste etc...

sorry for the slow progress but ive just received a promotion at work and now looking at moving out.. but if plans go well and i balance it out right the new year i should be in my own place and have some nice additions for this :)

[Dan-Subtle]

Bloody hell mate that fuse box still not turned up? I'd contact the seller as you was waiting for that last time I commented. Tell him its holding up your build.

Got any more pictures?

Congrats on the promotion, where you working now?

[Prickle]

In the meantime. Get those lessons booked ect.

[jayline]

Bloody hell mate that fuse box still not turned up? I'd contact the seller as you was waiting for that last time I commented. Tell him its holding up your build.

Got any more pictures?

Congrats on the promotion, where you working now?

nope so opened a claim via payapal, but on the plus side i have got another coming which ius due anyday so when i get back to hertfordshire i will have a few days to sort this out!!!

i dont atm matey but will get pics when im back. got a new rocker cover for xmas so well happy its a nice blue :)

i still work at mcdonalds but am being fast track to manager :)
In the meantime. Get those lessons booked ect.

lessons are going well... but juggling a build, moving out and lessons is hard :(

[jayline]

so finally i got a tracking number to find out its royal mail :(

its been 4 days not bad for a 1st class recorded delivery and still no sign of the parcel!!!

i have also sourced a new front bumper and wings :)

[Mikol]

Start it up already! :p

[jayline]

Start it up already! :p

i will when royal mail get there arses into gear!!! next day delivery what a f***ing joke!!!

i promise you that as soon as i get back the car will be done!!!

[jayline]

got some new shoes on the way, super t's no tires!!!
http://i1094.photobucket.com/albums/i450/Jay_Line/mk1%20saxo%20flatarch/newwheels.jpg

not bad for 50 quid :P

[JoeHindle]

got some new shoes on the way, super t's no tires!!!
http://i1094.photobucket.com/albums/i450/Jay_Line/mk1%20saxo%20flatarch/newwheels.jpg

not bad for 50 quid :P

Ohai there!

[jayline]

Ohai there!

Yeah boy!!! Get them after new year to to shit courier service due to Xmas and new year!

[JoshO]

Car should look good on the super t's =] I'll be up in the new year mate to get it running dont you worry =]

[jayline]

Car should look good on the super t's =] I'll be up in the new year mate to get it running dont you worry =]

Cheers matey, I bought quite a bit from euros before I left for Kent aswell :)

[jayline]

Another update, will be receiving a few parts in a Week which include steering wheel and boss and uprated rear bushes :)

[JoeHindle]

Ooooooh! :P *ahem* I've updated my thread, you still ain't commented this is unlike you!

[jayline]

Ooooooh! :P *ahem* I've updated my thread, you still ain't commented this is unlike you!

Is okay I have commented back :) will have an bigger update in a week :)

[Cam]

Is okay I have commented back :) will have an bigger update in a week :)

What your license? ;)

[JoeHindle]

What your license? ;)

Get down the chemist and get some Germoline, because you just got BURRNEEEDDDDDDDD

[jayline]

Haha, I will be doing a week intense course in jan/feb time :)

[JoeHindle]

Haha, I will be doing a week intense course in jan/feb time :)

Thank God for that!

[jayline]

Got the final bits today :) so expect an update!

[JoeHindle]

Got the final bits today :) so expect an update!

Does this mean it'll run?! :P

Sent from my Nexus 7 using Tapatalk 2

[jayline]

Does this mean it'll run?! :P

Sent from my Nexus 7 using Tapatalk 2

It will be!!!!

[JoeHindle]

It will be!!!!

Yussssssssssss!!

Sent from my Nexus 7 using Tapatalk 2

[jayline]

Yussssssssssss!!

Sent from my Nexus 7 using Tapatalk 2

Can't wait! Just got to fit the new parts (fusebox and altenator) then the manifold and exhaust :)

[jayline]

fitted a fair bit this morning, inlets on, manifold is kinda on (awaiting new nuts for it :P) supersprint is looking amazing being back on the car, all parts of the loom are now plumbed in and doubled checked, all pipe work is done etc...

The only bits left is to fit the new alternator and mounting braket, fill all fluids, get the new handbrake cables on and we are good to go :) THE only Problem is the s1 rallye air box doesnt fit so will need to modifiy that at some point or sell it on and get a different setup :)

http://i1094.photobucket.com/albums/i450/Jay_Line/43502D42-C0B8-427C-BE60-7B8A1E33F594-565-0000006D56DD5F0A.jpghttp://i1094.photobucket.com/albums/i450/Jay_Line/47E95137-C7E5-4596-9ECE-556445FEEADB-565-0000006D4EB9FE76.jpg
http://i1094.photobucket.com/albums/i450/Jay_Line/53D949D8-DE0E-496C-B553-D2DA92CFCE73-565-0000006D49A8170C.jpg

[Prickle]

yay finally. Lol.

[jayline]

yay finally. Lol.

tell me about it, got a mate coming over next week to double check my work and it should be done!!

next sets are to bolt roll cage in fit my lower subframes and wait for my xmas prezzies to arrive from myself :P

AND i got a new rocker cover in a nice BLUE

[Bedford126]

So am I right in thinking that this is basically just the same spec and power as a rallye now?

Good work mate I was going to do some stuff on mine today but I got outside and thought fuck that its too cold.

[jayline]

So am I right in thinking that this is basically just the same spec and power as a rallye now?

Good work mate I was going to do some stuff on mine today but I got outside and thought fuck that its too cold.

well from the info i have gathered from the rallye forums and reliable sources this will be on par with the rallye's just with a 1.4 bottom end!

i was exactly the same but ive been to lazy and i was getting abuse for not finishing it so i manned the fuck up :P

[JoeHindle]

tell me about it, got a mate coming over next week to double check my work and it should be done!!

next sets are to bolt roll cage in fit my lower subframes and wait for my xmas prezzies to arrive from myself :P

AND i got a new rocker cover in a nice BLUE

Its about time!!! :hug:

[Prickle]

tell me about it, got a mate coming over next week to double check my work and it should be done!!

next sets are to bolt roll cage in fit my lower subframes and wait for my xmas prezzies to arrive from myself :P

AND i got a new rocker cover in a nice BLUE

Ha, good stuff. Will we hear it running next week then??


Good work mate I was going to do some stuff on mine today but I got outside and thought fuck that its too cold.

man up, get the thermals on ect. :P

[jayline]

Its about time!!! :hug:

haha, just got to wait for some new nuts.... LOL

cant wait to hear her purrr lol

[jayline]

@ PRICKLE

hopefully matey :) mates popping over on the friday so we will see, unless he finds a problem!!!

[Bedford126]

man up, get the thermals on ect. :P

Fuck that. That's what unit's are for plus the cold isn't good for my knees lol my excuse anyways.

Nice work anyways mate I wouldn't have known where to start at your age never mind do it on my own.

[jayline]

Fuck that. That's what unit's are for plus the cold isn't good for my knees lol my excuse anyways.

Nice work anyways mate I wouldn't have known where to start at your age never mind do it on my own.

cheers matey, well i have had some experience and was offered a job at bmw and audi but my grades fucked it for me so McDonalds is where im at now :(

tbh i just bought a haynes and made a few good friends on here and now ive learnt alot and in a space of a year i have changed 3 engine one in a 4x4, my one and a classic mini!! so all you need to do is be motivated enough and you could do anything within reason!!

[Bedford126]

cheers matey, well i have had some experience and was offered a job at bmw and audi but my grades fucked it for me so McDonalds is where im at now :(

tbh i just bought a haynes and made a few good friends on here and now ive learnt alot and in a space of a year i have changed 3 engine one in a 4x4, my one and a classic mini!!

Dont give in that easy mate. nothing stopping you getting grades and going to college and doing what you wanna do. I pretty much fucked everything up not going to school but i did night school just to get 3 grade c's and went from there.

Now I'm a cunt and charge what i want and do what I want lol.

[jayline]

Dont give in that easy mate. nothing stopping you getting grades and going to college and doing what you wanna do. I pretty much fucked everything up not going to school but i did night school just to get 3 grade c's and went from there.

Now I'm a cunt and charge what i want and do what I want lol.

cheers man, all i need is 2 c's in science :( so maybe night school is the way forward....

cheers for the positive comments, does mean alot... i am also looking into a boost setup which is kinda a bodge job for 100 quid all in!!

[jayline]

I now have sourced a new boot! But this one is different as its fibreglass and carbon wrapped! It looks the nuts IMO!!! Can't wait to get it on the car!

[Dan-Subtle]

How's this coming along Jay?

[jayline]

All together mate, got Monday Tuesday off so will be doing the last nuts up, ad sorting the brakes and tappers out! So fingers cross she lives!!!

[Tom5190]

Im sure it will live mate, best feeling in the world firing up a car and giving it a quick test after a long build!

[jayline]

Im sure it will live mate, best feeling in the world firing up a car and giving it a quick test after a long build!

Cheers Tom! I have to say your car is the reason I carry on tbh! It's such a great example if a flat arch!

[JoeHindle]

Cheers Tom! I have to say your car is the reason I carry on tbh! It's such a great example if a flat arch!

+1, Toms is an inspirational flattie!

[jayline]

+1, Toms is an inspirational flattie!

Amen to that!



In a plus note my friends coming up Tuesday so hipefully have it done sooner!

[JoeHindle]

Amen to that!



In a plus note my friends coming up Tuesday so hipefully have it done sooner!

Oooooosh!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[bobertmate]

cant wait to see this beast finished!

[Tom5190]

Cheers Tom! I have to say your car is the reason I carry on tbh! It's such a great example if a flat arch!

Cheers mate, look forward to seeing this running!

[baker556]

Whats the actual spec of this now jay-z?

head, block, inlet, ecu, loom, vlaves etc etc

[jayline]

Whats the actual spec of this now jay-z?

head, block, inlet, ecu, loom, vlaves etc etc

haha jay-z!

engine spec

head
professionally ported and polished s1 Rallye head, chemically cleaned, skimmed, running standard cam, valves and springs till new ones are sourced!

inlet
standard s1 rallye inlet

loom and ecu
standard s1 rallye loom and ecu (raised rev limiter as standard)

other parts
1.4 single plug furio bottom end
1.1 gearbox (till a 1.3 or xsi is sourced)
421 manifold
2" supersprint decat system
s1 rallye alternator and starter motor

next on the list is new cams, springs and valves for the head, new gearbox and which either i can get hold of first itb's or turbo setup!

can get a full spec of car if anyone wishes to know :)

[JoeHindle]

Cheers mate, look forward to seeing this running!

*ahem* you missed my compliment ;)

Sent from my Nexus 7 using Tapatalk 2, to piss off Chr15.

[Tom5190]

Haha sorry pet I didnt realise cheers

[JoeHindle]

Haha sorry pet I didnt realise cheers

;):D Jay will have a mk1 twin soon when mines had its conversion :p

Sent from my Nexus 7 using Tapatalk 2

[jayline]

;):D Jay will have a mk1 twin soon when mines had its conversion :p

Sent from my Nexus 7 using Tapatalk 2

get a fooking shift on then!!! ive offered my services to help ya out with parts you need! lol

[JoeHindle]

get a fooking shift on then!!! ive offered my services to help ya out with parts you need! lol

Already got an entire MK1 front end, waiting to speak to a welder to cut off the car and weld new panel in.

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Already got an entire MK1 front end, waiting to speak to a welder to cut off the car and weld new panel in.

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

the fuck you doing welding for? im pretty sure its just a new slam panel, wings etc?

[Tom5190]

boooo for the mk1 conversion man!

[Dan-Subtle]

the fuck you doing welding for? im pretty sure its just a new slam panel, wings etc?

incorrect, the mk2 front end will need cutting/welding for the mk1 front end to fit correctly.

not just a simple bolt off bolt on jobbie.

hurry up and get this running jay, how long has it been, i went and collected that engine yonks ago now. hows your new wheels?

[JoeHindle]

the fuck you doing welding for? im pretty sure its just a new slam panel, wings etc?

Shorter on drivers side due to me writing it off, so needs new panel welding in..





boooo for the mk1 conversion man!

ALWAYS! Preferred the front of MK1, especially with morettes

Sent from my Nexus 7 using Tapatalk 2

[Tom5190]

:( disapointment.

[JoeHindle]

:( disapointment.

I'm sorry Tom :(

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

So today the car is complete with all the parts and put together! But.... I need a new crank sensor as the Rallye one if different to the Saxo one :( so car will not be running today but it will be when my friend comes up again in a few days/ week will a spare :)

[jayline]

Going to 2 scrap yards near by as I want it done today!!!

[JoeHindle]

Going to 2 scrap yards near by as I want it done today!!!

Good boy!!!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[BIG]

Get er done im excited

[jayline]

The car that saved the day!!

Citreon ax 1.0
http://i1094.photobucket.com/albums/i450/Jay_Line/9ADF7D02-51CA-4DF9-9B4B-CB8DE0660E5C-750-0000009D3E7A47AC.jpg

So got the crank sensor and mounting point and Ecu cover for a grand total of 20 quid :)

Sadly we ran out of time today due to the in expected trip and sunlight being limited! But my mate is back up on Friday to finish the job :)

[jayline]

And I got a steering wheel and new boss for a tenner ;)

ooh and a replica 106 simota induction kit

[JoeHindle]

And I got a steering wheel and new boss for a tenner ;)

ooh and a replica 106 simota induction kit

Jammy little shit, we aren't aloud round scrap yards like this near me, we have to ring, and then stand in the office

Sent from my Nexus 7 using Tapatalk 2

[jayline]

Jammy little shit, we aren't aloud round scrap yards like this near me, we have to ring, and then stand in the office

Sent from my Nexus 7 using Tapatalk 2

well he did try that but we explained what we wanted and he was like fuck it go through that down down the bottom and its on your left lol!

oh and there was a mark 1 flat arch in red in there ;)

[JoeHindle]

well he did try that but we explained what we wanted and he was like fuck it go through that down down the bottom and its on your left lol!

oh and there was a mark 1 flat arch in red in there ;)

:o poor flat arch :(


Sent from my Nexus 7 using Tapatalk 2

[JamieFozzie]

Looking forward to seeing this thing finished

[jayline]

Looking forward to seeing this thing finished

Cheers bud! Should be done Friday!

[JoeHindle]

Cheers bud! Should be done Friday!

Not good enough!! ;)

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Not good enough!! ;)

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Shuup you!!!

[JoeHindle]

Shuup you!!!

Mwahahahaah!!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Mwahahahaah!!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Ill get a picture of my new steering wheel and induction which I got for a steal!

[JoeHindle]

Ill get a picture of my new steering wheel and induction which I got for a steal!

This pleases me..

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Here you go! Got this for 30 quid!

http://i1094.photobucket.com/albums/i450/Jay_Line/C6DB211A-F585-4F77-A799-F0279F7467B7-613-0000007F5797D8AA.jpg

http://i1094.photobucket.com/albums/i450/Jay_Line/23BE9117-ED44-47E2-B9C0-8EB0D19ED0C4-613-0000007F5ED79157.jpg

[JoeHindle]

Here you go! Got this for 30 quid!

http://i1094.photobucket.com/albums/i450/Jay_Line/C6DB211A-F585-4F77-A799-F0279F7467B7-613-0000007F5797D8AA.jpg

http://i1094.photobucket.com/albums/i450/Jay_Line/23BE9117-ED44-47E2-B9C0-8EB0D19ED0C4-613-0000007F5ED79157.jpg

That Simota rep looks a bit rough :/ wheel looks smart though

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

It does but d.w I got plans for it so it won't be for long! Steering wheel is getting changed for a deep dished one soon ;)

[JoeHindle]

It does but d.w I got plans for it so it won't be for long! Steering wheel is getting changed for a deep dished one soon ;)

Orly ;) and same idea as me ;) dished ftw!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Orly ;) and same idea as me ;) dished ftw!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Yes matey! Includes battery relocation and a bigger air box and cold air feed lol

[JoeHindle]

Yes matey! Includes battery relocation and a bigger air box and cold air feed lol

Me likey the sounds of this!

Gonna upload some photos in a bit :D

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Okay baby cakes! I really want xsi alloys in white with blue rim :/

[JoeHindle]

Okay baby cakes! I really want xsi alloys in white with blue rim :/

They would look good in anthracite dude

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

They would look good in anthracite dude

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Won't go with my blue, orange and satin black color theme!

[JoeHindle]

Won't go with my blue, orange and satin black color theme!

Satin black thennnn!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Satin black thennnn!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

With a blue or orange rim!

[JoeHindle]

With a blue or orange rim!

Two blue, two orange, get lairyyyyy!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

I like it :)

[JoeHindle]

I like it :)

I'm a genius!! Be like JDM y0!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

I'm a genius!! Be like JDM y0!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Just need the camber :(

[JoeHindle]

Just need the camber :(

Wait till your beam goes fucked :panic:

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Wait till your beam goes fucked :panic:

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Nah... Ill just but a civic!!!

[baker556]

What head is it running jay didn't see that in the specification furio?

[jayline]

What head is it running jay didn't see that in the specification furio?

Sorry it's a s1 Rallye head :)

[Dan-Subtle]

Seems the engine is finally getting there, about bloody time.

Get a pic up of the collection of wheels you've got, what tyres you buying for the oz's you bought a couple of pages ago.

[jayline]

Seems the engine is finally getting there, about bloody time.

Get a pic up of the collection of wheels you've got, what tyres you buying for the oz's you bought a couple of pages ago.

Yup it is :) will be ready for mot time by Friday :)
I only have 2 sets the r rims on the car and the oz in Kent!

[baker556]

I gather as the following...

S1 raylle head/inlet
furio block
S1 raylle loom/ecu
1.1 gearbox

With good breathing mods 110 bhp is achievable, its a good little project but i think with all the loom splicing needed, sourcing different parts, plus the cost, poor mpg and poor idle would give me a headache. In terms or money driveability and reliability the 16v engine would have been better but for some reason i am intrigued by this engine and how it will perform.

[Oli-VTR]

i got the xsi alloys in white, they look pretty fresh imo

[jayline]

I gather as the following...

S1 raylle head/inlet
furio block
S1 raylle loom/ecu
1.1 gearbox

With good breathing mods 110 bhp is achievable, its a good little project but i think with all the loom splicing needed, sourcing different parts, plus the cost, poor mpg and poor idle would give me a headache. In terms or money driveability and reliability the 16v engine would have been better but for some reason i am intrigued by this engine and how it will perform.

tbh mate, there was no loom splicing at all? and i got the parts easily to make this conversion work but i wanted to take my time and do it properly! i do agree that the 16v would of been more cost effective and so on but as i always say im learning about engines and so on so this is beneficial to me :) i will say that i will be going 16v for the second car though!

i got the xsi alloys in white, they look pretty fresh imo

its why i choose to try get some ;)

[Mikol]

Wut.... you didn't splice the S1 loom to the Saxo plug?

[jayline]

Wut.... you didn't splice the S1 loom to the Saxo plug?

Nope :) was a straight fit! Will update tomorrow :)

[Gandi699]

Does it start though? If so I might try and source an s1 loom and ecu as mines a mk1

[jayline]

Does it start though? If so I might try and source an s1 loom and ecu as mines a mk1

Will let you know tomorrow :) as it stands lights are showing up on the dash but we haven't tried turning it over yet as we want to make sure everything is in place!

[Tom5190]

Sadly ive got to say i doubt it will run, infact id be amazed. although they do fit the pin layout is different. Atleast you know thats what it is if it dosent though.

[Gandi699]

do you have a pin out for s1 vs vtr mk1?

[Mikol]

You are literally insane.

[jeffchiz]

My 16v engine came out of a s1 106 and the loom ran both cars also, however iirc the clocks didn't work when it was fitted to the s1

[Gandi699]

You are literally insane.

whos insane?

[jayline]

Cheers everyone lol! Tbh me and my mate josh are going to try it but if it doesn't work we have another loom on standby that has had the plug cut off ready for the furio plug if the loom doesn't work!

In regards to pin layout I do believe Tom has a thread on it ;)

[jayline]

Just been told that my mate can't make it tomorrow :( do its going to be Monday which is better as I have a day off!

Sorry guys :(

[Cam]

Do it yourself aslong as it timed up and everything is plugged in you should be ok...

[jayline]

Do it yourself aslong as it timed up and everything is plugged in you should be ok...

It's all timed up its just tappets need to be done and he has the tool to do so! Also he has my supersprint so I would be able to start it as it has no exhaust lol

[Cam]

Tool? All you need is a 13mm socket to get rocker off (iirc anyway its 10 or 13mm) and a feeler gauge with a socket to adjust. If you done all that should be a walk in the park dude.

[jayline]

Tool? All you need is a 13mm socket to get rocker off (iirc anyway its 10 or 13mm) and a feeler gauge with a socket to adjust. If you done all that should be a walk in the park dude.

I don't have the gauge! And I don't have a exhaust ATM! As he has borrowed it and I was meant to get it back today when he works on it!

[Cam]

Go get one they are like £2 :homme:

Exhaust well fuck the neighbours :p

[jayline]

Go get one they are like £2 :homme:

Exhaust well fuck the neighbours :p

This is true!

Nah fuck that I'm in enough shit already! Don't want to push my luck!

[JoeHindle]

This is true!

Nah fuck that I'm in enough shit already! Don't want to push my luck!

Pffft, rebuilt my mates 3cylinder Cross C and we fired first time without any exhaust

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[Mikol]

whos insane?

Jay for just plugging stuff in and turning it on. HE MAD.

If you didn't even check the pins before you just plugged it in and switched the power on, you are literally on crack. If you get lucky then great but it's really not a good idea.

[jayline]

Jay for just plugging stuff in and turning it on. HE MAD.

If you didn't even check the pins before you just plugged it in and switched the power on, you are literally on crack. If you get lucky then great but it's really not a good idea.

how would know if it would work if you dont take a risk every now and then ;)

[Tom5190]

What sam says is right, i think you will find that the fuel pump primes and the car turns over, it may run but eveything else is in a different place on the pin layout.

[jayline]

Kit a little update, the car is getting colour coded and will be running orange vts rims that I will be collectin today/tomorrow :)

[Oli-VTR]

but does it runnnnnnnnnnnnnnnn

[JoeHindle]

but does it runnnnnnnnnnnnnnnn

This... Sod colour coordinating..

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

This... Sod colour coordinating..

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Not yet guys the snow as put me and my mate off so we are gathering pars and a gazebo for tomorrow!

[josh11490]

Been watching this thread for ages.

For some reason it's really keeping me interested in it haha

Get it running! Lol

[Aly]

Had a long read through this and love the work you've done, I had Sparco Sprint V buckets in my VTS, they are very light and fairly cheap but I found them quite comfortable, although I'm only 5ft 7 and I was sitting very low down in them.

[jayline]

Been watching this thread for ages.

For some reason it's really keeping me interested in it haha

Get it running! Lol

Cheers for the comment matey!
It will be tomorrow, today I bought new battery, spark plugs and a gazebo lol!

Had a long read through this and love the work you've done, I had Sparco Sprint V buckets in my VTS, they are very light and fairly cheap but I found them quite comfortable, although I'm only 5ft 7 and I was sitting very low down in them.

I dot have then any more :( looking at other now got a long trip tomorrow as I'm off to Leicester them peterbough lol! So looking at a 7 hour round trip!!!

[Gandi699]

Come on your can whip in plugs and a battery on in ten minutes. Get it started today!

[jayline]

Come on your can whip in plugs and a battery on in ten minutes. Get it started today!

It's it a few other bits to do! Still need tappers, manifold and exhaust on matey! And the snow is so heavy here so I can't do it lol! But I promise it will be tomorrow :)

[Dan-Subtle]

Sod the colour coding and orange VTS wheels (thought you bought oz wheels before Christmas????) get the proxy thing going.

If what people are saying above is true you would be better off spending the money on sorting the loom etc not tarting it up to look good.

Come on, I'm intrigued (sp) to see what results this engine produces.

[jayline]

Sod the colour coding and orange VTS wheels (thought you bought oz wheels before Christmas????) get the proxy thing going.

If what people are saying above is true you would be better off spending the money on sorting the loom etc not tarting it up to look good.

Come on, I'm intrigued (sp) to see what results this engine produces.

i did indeed matey, they are in kent :) car will up running tomorrow :)

looms is not a problem as if there is a problem i have a spare s1 loom and a saxo loom to splice :)

im also intrigued (sp) in seeing what this produces!!!

[bobertmate]

im getting impatient now Jay :( lol

[jayline]

im getting impatient now Jay :( lol

sorry mate... the snow is a bitch but its okay i have heaters and shelter so ill be on it tomorrow!

[jayline]

My new bumpers and side trims :)

http://i1094.photobucket.com/albums/i450/Jay_Line/67E6ECCA-F2E1-4AD5-82E2-1F5F58B38F2D-685-0000004726F7443D.jpg

[Gandi699]

Does it run?

[JoeHindle]

The look of this cars going to be completely transformed!!


Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[Oli-VTR]

Start the fuckin engine!

[jayline]

Give me an hour!!!

[JoeHindle]

Give me an hour!!!

Your time is up

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[jayline]

Your time is up

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

Fuck off, it's on hold gt to pick up my wheels! But it's okay it will be done as my mate said he's not leaving till it runs!

[Gandi699]

Get the first start up on video for us here. We've been waiting a while :P

[jayline]

Get the first start up on video for us here. We've been waiting a while :P

Will do tonight lads!

[JoeHindle]

Will do tonight lads!

Sounddddddd

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[Jay_]

Running yet?

[Gandi699]

any life in it yet then?

[Jay_]

My bet is this car won't ever be used on a road / track. Will have even more money thrown at it, Jay will pass his test, not be able to insure it and break it for parts.

Prove me wrong lad. Please.

[ed-bradley]

Needs lowering.




And starting.

[JoeHindle]

My bet is this car won't ever be used on a road / track. Will have even more money thrown at it, Jay will pass his test, not be able to insure it and break it for parts.

Prove me wrong lad. Please.

+1 I'm just going it all comes together

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[baker556]

Wheres the updates?

[ed-bradley]

Might have written it off already doing warp factor 9 on a roundabout..

[JoeHindle]

Might have written it off already doing warp factor 9 on a roundabout..

I have evidence, he lost his head in the crash, he whatsapp'd me hurhurhur

EDIT CSI area saying it was no accident, his brakes had been tampered with...


Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[Tom5190]

The suspense is killing me...

[JoeHindle]

The suspense is killing me...

Dont die before we swap bumpers!!

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[Tom5190]

Ha, forgot to reply the other day what did you mean no mounts?

[Prickle]

The suspense is killing me...

Im on the edge of my seat.

rubbing my thighs back and forth. bit much?

[Cam]

The suspense is killing me...

Boring me tbh i checked like 3 times today and its like........

Lol

[JoeHindle]

Ha, forgot to reply the other day what did you mean no mounts?

I'll Facebook you

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[Jay_]

I expect this running by the time I get back home from work.

[jayline]

All I got to say is.... How you you get a nut out of a spark plug holder? A numpty dropped it in there and now I can't get it out!

Also I didn't get to finish it last night as the trip up north took longer than it should off a 4 hour journey ended up a 8-9 hour journey :(

I'm sorry guys!

And this car will not be broken for parts!

[Saxovch22]

Dibs on the cage if you break it ;)

Joking mate just dying to see this thing up and running

[Gandi699]

so tonight it starts then yes?

[jayline]

As soon as I get this stupid but out the spark plug Column it should :) some numpty dropped it in there! So it the only bit that's stopping this! So tomorrow morning I will try get it out again! But I'm at work till 2 in the morning now!

[Tom5190]

Magnet or long reach pliers

[ed-bradley]

Pencil with blue tac/chewing gum on the end.. Works every time.

[jayline]

Magnet or long reach pliers

Tried a magnet and nothing! Will try plairs tomorrow morning!

Pencil with blue tac/chewing gum on the end.. Works every time.

Okay I'll try this aswell tomorrow morning!


Also people please bare with me as I do work so I am limited by time when doing the car :)

[chris-hall-yo]

try trowing the socket on the floor. 9/10 It'l drop out, if not hammer an punch :y:

[jeffchiz]

try trowing the socket on the floor. 9/10 It'l drop out, if not hammer an punch :y:

The nut is in his spark plug hole not stuck in a socket

[Gandi699]

so its on top of the piston then? or actually stuck in the hole itself?

[Jay_]

Is it out yet? Or running? or any updates?

[Dannycant91]

Best thing to do is get a bolt and see if u can screw it into the nut, then yank it out.

[jeffchiz]

so its on top of the piston then? or actually stuck in the hole itself?

i thought this but i havent seen an 8v engine in ages to see where the injectors are

if it was a 16v then yea i would imagine that it would be in the combustion chamber

that was the first thing that came to my mind

[jayline]

It's okay I got it out! It was wedged between the spark plug an the wall! Had to take the inlet and fuel rail off to get it out!

In regards to the running of the car the fuel pump primes and all is well, didn't want to start it as it had no exhaust on and I think the tappets need redoing as I forgot one! But I have Monday off so will crack on then!

Sorry for the delays! Here's a pictures of the new bits:

http://i1094.photobucket.com/albums/i450/Jay_Line/D6F74ED4-135C-48B6-95FB-8ABE910652D1-2585-0000022867559496.jpg

[Dan-Subtle]

Looks good. What wheels you going to be running mate as I saw the new orange VTS wheels are for sale on 106 owners?

What you got left to do on Monday?

[Gandi699]

haha come on start it already

[jayline]

Looks good. What wheels you going to be running mate as I saw the new orange VTS wheels are for sale on 106 owners?

What you got left to do on Monday?

Cheers mate! I've sold the OZ's for a little profit and I'm not sure tbh I got the vts and vtr rims to shift first! Looking at some Rallye steels brand new from dealer!

Monday all I have to do is check tappets, fluids and fit my exhaust that a mates borrowed and we should be good to go!
haha come on start it already

I will soon :) jut making sure it's 100% ready!!!

[BIG]

Start it start it haha looks good! Ill take the s wheels!

[jayline]

Start it start it haha looks good! Ill take the s wheels!

Pm me ;)

[Dan-Subtle]

must be running by now??

[jayline]

must be running by now??

Sad to say after today's efforts I need a spliced loom :( but no worries this will be done ASAP as Tom on here is hopefully sorting it out as I have both looms to hand!

[jayline]

The car this morning please note the front is higher due to being on a jack :)

http://i1094.photobucket.com/albums/i450/Jay_Line/98EA6A96-DB41-475C-9A22-3756C3B0CB06-608-000000DE6110E90C.jpg

[JoeHindle]

The car this morning please note the front is higher due to being on a jack :)

http://i1094.photobucket.com/albums/i450/Jay_Line/98EA6A96-DB41-475C-9A22-3756C3B0CB06-608-000000DE6110E90C.jpg

Watch the bin men don't take the Saxo with the recycling... ;)

Sent from my Nexus 7 using Tapatalk 2, to piss Chr15 off.

[saxplee]

I noticed you said you work at McDonald's, doing a build aswell paying for insurance, tax and modding on a McDonald's wage is hard work, im a fellow McDonald's worker haha lmao!

Trust guys its hard to run a car on the wage im on aswell as modding it

[jayline]

I noticed you said you work at McDonald's, doing a build aswell paying for insurance, tax and modding on a McDonald's wage is hard work, im a fellow McDonald's worker haha lmao!

Trust guys its hard to run a car on the wage im on aswell as modding it

Well I don't run it or that yet matey! But I am paying stupid amounts of rent for me and the girlfriend I also pay for her travel to Kent 3-4 times a week and then I'm saving for a place to live etc... Tbh I work 6-7 days a week and about 10 hours a day so it's ok pay tbh! I bring back around 700 every fortnight now due to my promotion :)

[jayline]

I've been in this place just under 6 months an I'm already a staff trainer!!! I'm now inline for management and they said I should be by the summer :)

[saxplee]

I've been in this place just under 6 months an I'm already a staff trainer!!! I'm now inline for management and they said I should be by the summer :)

depends if you like working there, its just full or childish kids and mangers tbh, im only 18 my self, i work between 4-5 days a week mainly 8 hour shifts and after a day in that place drives me mad, the who manger setup in my area is setup by utter wankers! most of the mangers couldn't even manage monkeys let alone a multi-billion pound company!

[Bedford126]

You really are a fucktard. The number of customers that say you are a fucktard is crazy. Make no wonder you are "struggling" try growing the fuck up.

Cars looking great mate just a little tip don't buy anything from saxplee he likes to pretend he sends stuff then doesn't like to give refunds for a few weeks.

[jayline]

You really are a fucktard. The number of customers that say you are a fucktard is crazy. Make no wonder you are "struggling" try growing the fuck up.

Cars looking great mate just a little tip don't buy anything from saxplee he likes to pretend he sends stuff then doesn't like to give refunds for a few weeks.

Cheers for the nice comment about the car matey! I have some one coming down Monday night to do the loom :)

And cheers for te heads up lol

[Bedford126]

Cheers for the nice comment about the car matey! I have some one coming down Monday night to do the loom :)

And cheers for te heads up lol

No prob's mate who's doing the loom for ya?

[jayline]

No prob's mate who's doing the loom for ya?

Tom is matey! Got hold of him and he said he would drive down and do the loom here! An was at a great price so was like yes please!