Group Buy On 16V Newman Cams!!!!

[mrorange2]

Come on people we just need two more people the more the merrier if you want some info on the cams please pm me and i'll tell you what you wanna know as said we need at least two more people for this to go ahead.

The price is £217.37 which for a set of good cams is a bargin.

[mrorange2]

Anyone?

[samcook]

is that the price for 16v cams?

[stevenet15]

that the delivered price?

[scottyvts]

is there any other thingf thats need 2 fit these cams?

[samcook]

are they similar bhp increase with a remap as the 708s?

[Japman]

More info needed please

[Mystic]

More info on the newman company can be found on their website: http://www.newman-cams.com/

For the cam specifications see Here (http://www.newman-cams.com/pdf/peugeot.pdf)

are they similar bhp increase with a remap as the 708s?

iirc the PH3 cam are slightly longer duration than the 708s & the PH1 cam are slightly shorter duration than the 708s. (its been a while since iv seen the 708s spec sheet)

PH3 cam seems to be the poular choice for 16 valvers though. By the looks of things with a decent remap you could see more of a gain with these over 708s?

[Japman]

What sort of BHP increase are we looking at

[Mystic]

You cant really quote bhp figures for things like this since there are so many variables to take into account but with a full exhaust system, manifold & enclosed filter its not unreasonable to be aiming circa 150bhp.

EDIT: you will need a remap of course, otherwise the cams will only give a couple bhp & have other side effects like runing lean & an irratic / lumpy idle

[Japman]

ok thanks for the info

[mrorange2]

Yes the price is for delivery to your door. they run on standard internals.

As said above actually the PH3 has a little bit more lift than the 708 so should see same if not a little better results than the 708 the PH1 has a little less lift but is better on idle so you'll see a few BHP down on the 708 to be honest you aint gunna get cams at a better price and they are coming from a good company.

The more the merrier come on people this is a bargin.

[bullit]

one person says duration, ones says lift, lol. if the duration is higher than 708 it sounds good, lesser lift less headwork

[mrorange2]

Duration on 708 258 / 258
Duration on PH3 264 / 264

[D34no]

is there a group buy on single cams for the vtr?

[mrorange2]

there was but this has already gone ahead mate.

[mrorange2]

this is peoples last chance to get involved in this now cheques will be send this week by the looks of it so last chance to get in.

[shaggers_saxvtr]

That is cheap IMO.

What else would be needed, adjustable pulleys and a remap..?

[Mystic]

for the VTS you would just need the remap, they already have adjustable pulleys :y:

C'mon people, apart from williamsvts' thread this is the deal of the year :A:

[mrorange2]

As above this is a great deal cheques will be getting send this week so today is really your last chance to get in on it.

[mrorange2]

Looks like somoene else has had to pull out is there 1 more person who can take there place?????

[riggsy]

Interested, but want to see what people think of these before i buy!

[Mystic]

We wont know untill the group buy goes through mate and it will be too late to get in on the bargain price then. There was a site who used newmas cams on their cars & got 168bhp with the cams and some headwork iirc.

I think the 8v guys should have their cams soon though so that might be of some use to u?

[VTS_16v_Boy]

Shame I would have been intrested if I hadnt had to replace my Cracked 4-2-1 manifold this month - Bugger, another bargain slipped my by!

I hate French Cars . . . Hold on wait thats wrong - I hate MYSELF for fiddling about with French Cars (Thats more like it)

Sorry guys :-(

[mrorange2]

The 8v boys got theres yesterday and everyone is very happy one lad should have this in and remaped by next week.

Had alot of interest on SSC so fingers crossed

[riggsy]

Hmmm i prefer to wait and see mate.

Good luck with the group buy.

[Mystic]

panzy ;)

[riggsy]

Lol no just dont like wasting money...

They sound good from what you lot say even more so because there like the 708s.

[mrorange2]

Up to you mate your the one missing out!

[mrorange2]

Someone else is in YAY so if anyone else wants in last chance now posting them off on monday morning

[dowdie]

hi mate i am very interested in this could u pm me and also were could i get these fitted and how much thanks

[Mystic]

If you put up a thread in your local regional forum (http://www.saxperience.com/forum/forumdisplay.php?f=34), im sure someone could recommend a reputable garage to try!

[Diamond]

am i to late for this????

[Mystic]

PM mrorange2 (http://www.saxperience.com/forum/private.php?do=newpm&u=12373) and ask if they have been sent off. Today is still the deadline i think

[mrorange2]

If you send in todays post you'll be okay pm me for details.

[Mystic]

This progressed any further?

[stevenet15]

i realy want in on this, there speaking to mr newman for me to see if i can transfer the cash on the 5th, fingers crossed

[Mystic]

ah right, im not in any rush, iv just got an empty spot on my shelf that needs filling :P

fingers crossed, its a great deal

[stevenet15]

yeah i am jsut buying them now and fitting in a few months as at this price jsut aswel buy them now

[Mystic]

Did this get anyfurther then? Think i noticed the cheque had been cashed, but cba to go to an atm lol ;)

How are we doing?

[mrorange2]

Have you not got yours yet mystic?

[Mystic]

Nope, not yet. I gather the money is with newmans now then?

So we can expect them soonish?

[Mystic]

Ah, my cams arrived this morning, thedelivery guy said he had tried to deliver twice last week aswell but noone was in the workshop, oops :oops:

Cheers mrorange, i look forward to having them fitted although it will be a while yet!

How everyone else getting on with theirs?

[nassso]

Only mine not here yet :wall: :( :(