View Full Version : Exhaust middle section (Strate superspring)
bez_vtr
10th April 2007, 21:14
Super Sprint middle section
has anyone got the strate pipe middle section made by supersprint or does anyone know much about it , basicly got a gmc manifold and getin a omp back box and want abit performance, will that middle section do the job ?
any info will help
cheers bez
bullit
10th April 2007, 21:19
yes it will mate. ebay sell them.
droopster
10th April 2007, 21:30
Ebay do the version where it replaces the cat if it is under the car and therefore you need to put it back on for the MOT. On here KAMRACING sell both, so you do not need to replace the cat if you do not want to.
bez_vtr
10th April 2007, 21:32
the cat in down pipe , and i just took it of for a strate four branch , literly did it 2day , sounds wel nice ! atm just got standard middle section and universall twin 5 inch rage exhuast so lets alot of noise out ,any1 got the link for the ebay site because i carnt find it
Steve
11th April 2007, 07:29
try halfords thats the cheapest place i have seen them :y:
leeroybrown
11th April 2007, 08:07
www.motorsportworld.co.uk
________
HURT FROM NEXIUM (http://www.classactionsettlements.org/lawsuit/nexium/)
stevenet15
11th April 2007, 08:13
the only ones i can see on ebay are the remus ones:
http://cgi.ebay.co.uk/FITS-SAXO-VTR-VTS-WESTCOAST-EXHAUST-REMUS-RACING-TUBE_W0QQitemZ230114166168QQihZ013QQcategoryZ10376 QQrdZ1QQcmdZViewItem
http://roadrunnermotorsport.co.uk/ebay/images/saxoremusracingtube.jpg
VTS_16v_Boy
11th April 2007, 08:16
www.perofmancecentre.co.uk are also pretty cheap
Generaly (as I was told) a twin box system creates more back pressure so increases lower down gains, where as a single box system creates less back pressure there by produces more higher end gains.
So a twin box system with a 4-2-1 (better for low to mid range) will give alot better low down gains and a single box sysytem with a 4-1 (better for mid to high range) will give better high end gains.
Wheather this is correct Im not sure but thats how it was explained to me :)
Steve
11th April 2007, 10:13
www.perofmancecentre.co.uk are also pretty cheap
Generaly (as I was told) a twin box system creates more back pressure so increases lower down gains, where as a single box system creates less back pressure there by produces more higher end gains.
So a twin box system with a 4-2-1 (better for low to mid range) will give alot better low down gains and a single box sysytem with a 4-1 (better for mid to high range) will give better high end gains.
Wheather this is correct Im not sure but thats how it was explained to me :)
http://www.performancecentre.co.uk/ ;)
droopster
11th April 2007, 21:05
www.kam-racing.co.uk (www.kam-racing.com) do it mate look there!
Steve
12th April 2007, 09:32
i still say halfrauds as that performance link above you need to pay £14 postage. Halfrauds £63 ftw
Steve
12th April 2007, 09:33
www.kam-racing.co.uk (www.kam-racing.com) do it mate look there!
should try sorting a group buy :homme:
stevenet15
12th April 2007, 10:55
anyone got one the the stright through sections fitted? how much rasp did it let through?
Dave_M
12th April 2007, 13:49
I will let you know the weekend. Ive just ordered mine from kam racing.
There is a guy who sells them on ebay. I was speaking to him before. But used kam racing before and always seems to be good delivery and service so bought it from there.
davevts
9th May 2007, 22:01
anyone got one the the stright through sections fitted? how much rasp did it let through?
quite a bit more compared to my full magnex system steve.
im loving it now.
KamRacing
9th May 2007, 22:05
should try sorting a group buy :homme:
If you like :y:
There are two centre sections available from supersprint. There is the road version which is made from thicker metal but my fav is the lightweight race centre section.
Sounds the nuts
davevts
9th May 2007, 22:08
If you like :y:
There are two centre sections available from supersprint. There is the road version which is made from thicker metal but my fav is the lightweight race centre section.
Sounds the nuts
i have this one, cant believe how light it actually is !!! :p
makaveli144
9th May 2007, 22:11
What is the end that joins to the back box like on these? Im thinking of getting one as I have a 421 manifold and powerflow straight through. I like the back box but the centre section is shite and cant be doing me any good performance wise.Will it fit? Also do they fit VTR's? IS the bore size different from standard?will this make a difference?
dean_vtr
10th May 2007, 18:35
ive got the remus straight threw from cat bak as above with magnex back box sounds nicer that with centre box in by far and n u can feel better performance
good post dean mate rep deserved! makaveli, talk to KamRacing over the phone fella, tell them exactly what you want, you should get a discount and get spot on results!
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.