electric mirrors - Saxperience

DawsonWicked · 8th December 2007, 10:47

how easy is it to swap manual ones for electrick ones n how much wiring n stuff is involved. or is there any guides.

SALTY · 8th December 2007, 10:51

Its a bastard to do mate, i fitted leccy mirrors to my old vtr, you need vts door looms, leccy mirrors, the door control unit and then you need to ideally get the loom connectors from the main loom to the a pillers then splice this into your courrent loom, then you need to run all the wires across. Can be done, but unless your good with a soldering iron and lots of patience, not worth it

Salty

DawsonWicked · 8th December 2007, 10:54

well i am good with soldering irons im a half qualified electrical engineer lol. but i have noo patience and willl just end up bodging it.

DawsonWicked · 8th December 2007, 10:55

i say if i get all the bits u shud help me lol.

SALTY · 8th December 2007, 11:03

have you got a haynes manual with the wirring diagrams in? I found that a very big help apart from they have 2 wires going to wrong places, but you can work this out, by comparing to the other side

salty